Latest vegetation Tenders | Government vegetation Tenders

CTN :42620789

11 Dec, 2025 NA

Dibrugarh - Assam

Tender For corrigendum : construction of equipment room at nrl rt - civil, structural & architectural, earth work in excavation (refer specification no. c-spc-103), earth work in excavation below ground level for all kinds of works in all types of soils except soft rock and hard rock as classified in specification for a depth upto 1.5m including removal of vegetation, shrubs and debris, cutting and dressing of sides in slopes, levelling, grading and ramming of bottoms, dewatering of accumulated water from any source and keeping the surface dry for subsequent works and disposal or stacking of excavated material within a lead of 100m, as directed including providing temporary supports to existing service lines like water pipes, sewage pipes, electric overhead and underground cables etc. all complete, but excluding shoring and strutting., for depth beyond 1.5m and upto & inclusive of 3.0m., earthwork in filling by excavating the earth from borrow areas arranged by contractor for all leads, transporting the earth from borrow area including cleaning & stripping the earth at borrow areas, breaking clods, loading, unloading and laying at all depths and heights in layers of thickness not exceeding 15 cms., watering, rolling and ramming by manual methods/mechanical compactors to achieve 90% of the maximum laboratory dry density, dressing, trimming, levelling the top surface etc. in foundations, plinths, trenches etc. all complete., backfilling after execution of the work to proper grade and level with selected materials from available excavated soil from spoil heaps, including re-excavating the deposited soil excavated earlier, breaking clods, laying at all depths and heights in layers of thickness not exceeding 15 cms. watering, rolling and ramming by manual methods/ mechanical compactors to achieve 90% laboratory maximum dry density, dressing, trimming etc. in foundations, plinths, trenches, pits etc. all complete., transporting and disposing the surplus earth and debris including shrubs and vegetations from construction area to areas anywhere outside the plant boundary including re-excavating the deposited soil excavated earlier, transportation, loading, unloading, laying at all depths and heights, stacking, levelling and dressing both the area (viz. from where the earth is transported and where it is deposited) to required levels and slopes complete with all lifts as directed. for carting on the basis of truck measurements (volume of truck reduced by 30% for voids) disposal area s outside plant boundary to be arranged by the contractor .royalty as applicable for disposal outside plant limits to be borne by the contractor., plain & reinforced cement concrete (refer specification no. c-spc-104), providing and laying plain cement concrete for all depths below and upto plinth level in foundations,drains, fillings, non-suspended floors, pavements & ramps or any other works etc. including shuttering, tamping, ramming, vibrating, curing etc. all as specified in any shape, position, thickness and finishing the top surface rough or smooth as specified and directed all complete for concrete of nominal mix 1:5:10 by mass (1 cement: 5 coarse sand: 10 crushed stone aggregates/gravels) with 40mm and down size graded crushed stone aggaregates/gravels.(all materials including cement supplied by contractor at their cost), providing and laying reinforced cement concrete of m-30 grade with 20mm and down size graded crushed stone aggregates/gravel in sub-structure of all types e.g. foundations, footings, raft, beams, slabs, pile caps, retaining walls, jambs, counterforts, buttresses, trenches, manholes,pipe encasement, catchpits, drains, rcc pits, equipment/machine foundations, pedestals, pipe sleepers, columns, plinth beams, suspended floors, beams, staircases, landings, steps, brackets etc. (including single pour concreting upto 250m3), including cost of admixtures if used,providing pockets, openings, recesses, chamfering etc., wherever req

CTN :42670161

06 Dec, 2025 NA

Bathinda - Punjab

Tender For bid to ras tender for supply of h1 8010-007488 paint rfu ad br spr syn ena sea green , h1 8010-000132 turpentine , h1(a) 8010-007496 paint fru gs syn dark brown , h1(a) 8010-007499 paint rfu olive green , h1(a) 8010-007484 paint rfu ad spr syn ena sky blue , h1(a) 8010-000578 paint finishing matt rfu air drying b , h1(a) 8010-007501 paint rfu fin syn ena br/spr olive green , h1(a) 8010-000128 thinner antichill , h1(a) 8010-007493 paint rfu syn spr white , h1(a) 8010-007482 paint rfu fin syn ena br/spr black , h1(a) 8010-007492 paint rfu fin syn ena br/spr signal red , h1(a) 8010-007497 paint rfu fin syn ena br/spr red oxide , h1(a) 8010-007494 paint rfu fin syn ena br/spr gold yellow , h1(a) 8010-007495 paint rfu air dry br spr ena green grass , h1(a) 8010-000272 varnish gold size , h1(a) 8010-000273 varnish oil g.s. , h1(a) 8010-007500 paint rfu fin ad br spr arctic white , h1(a) 8010-007483 paint rfu fin ad br/spr syn ena azure bl , h1(a) 8010-000281 varnish insulating air drying oil , h1(a) 8010-007498 paint rfu fin syn ena br/spr mid stone , h1(a) 8010-000577 paint rfu finishing matt air drying brus , h1(a) 8010-007489 paint rfu fin airdrying br/spr syn enam

State Government

CTN :42966383

09 Dec, 2025 30.00 Lacs

Kota - Rajasthan

Tender For corrigendum : name of work:- rmc to nagpura. - clearing and grubbing road land clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per morth specification clause 201. by mechanical means in area of thorny jungle, preparation of foundation for embankment scarifying existing bituminous surface to a depth of 150 mm by mechanical means scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per morth specification clause 305.4.3, wet mix macadam providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400-12 & 400-13 and morth specification clause 406. by mechanical means with all lead, prime coat providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base(wbm/wmm) including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per morth specification clause 502, tack coat providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per morth specification clause 503., bituminous macadam providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per table 500-7 premixed with bituminous binder, transported to site with all leads laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per morth specification clause 504. bitumen (vg-30), 20mm thick open-graded premix carpet using bituminous (viscosity grade/modified bitumen) binder providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as per morth specification clause 510. case - ii by mechanical means bitumen (vg-30), seal coat providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type a, type b and type c as per morth specification clause 511 by mechanical means case - ii : type b bitumen (vg-30), construction of subgrade and earthen shoulders construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300-2 with lead upto 50 m as per morth specification clause 305.3, carriage of material from quarry / crusher to work site including loading, unloading and stacking all complete. earth, sand, lime, morrum manure or sludge, marking centre line and stop lines etc. on road as per irc pattern with thermoplastic paint of approved quality and make with 8% glass beads laid on the road surface at temperature 160" c with a special a

CTN :43020671

31 Dec, 2025 NA

Delhi - Delhi

Tender For tender for rate contract of orthopedic trauma implants - arthroplasty implants, proximal humerus locking compression plate (philos) 3.5mm, left/right set: 3 to 11 holes on shaft of plate with 9 locking screws 3.5mm (length-all sizes) and 6 cortical screws 3.5mm (length-all sizes), stainless steel., narrow 4.5 mm locking compression plates set: 6 to 14 holes (combihole design) with 4 cortical screws 4.5mm (length- all sizes) and 6 locking screws 4.5mm (length- all sizes), stainless steel., distal humerus anatomical locking plate set 3.5mm left/right (two plates- one medial and one lateral with 6 cortical screws and 8 locking screws, 4 to 8 holes on shaft of plate), stainless steel., extra articular distal humerus locking compression plate 3.5mm left/right set, with 4 to 12 holes on shaft of plate(combihole design), with 4 cortical screw(length- all sizes) and 8 locking screws (length all sizes), stainless steel., interlocking nails for humerus with provision for minimum 3 proximal and 2 distal locking screws (nail diameter 6-8mm, length 22-30mm), proximal radius anatomical locking plate set 2.4mm/2.7 mm, left/right for fixation of radial head and neck, 4 to 6 hole with 4 locking screws and 2 cortical screws, stainless steel., olecranon anatomical locking plate set (hook plate) 3.5mm, left/right, 4 to 8 holes on shaft of plate with 8 locking screws and 4 cortical screws, stainless steel., locking compression plate 3.5mm (combi-hole design) set 5 to 12 hole with 4 cortical screws and 4 locking screws, stainless steel., 1/3rd tubular plate set 3.5mm 4 to 12 hole with 8 cortical screws, stainless steel., 1/3rd tubular locking plate set 3.5mm 4 to 12 hole with 4 cortical and 6 locking screws, stainless steel., distal radius anatomical locking plate set (volar) 2.4mm/3.5mm left/right with 3 to 7 holes on shaft of plate, with 6 locking 2.4mm screws and 2 cortical 3.5mm screws and 4 locking 3.5mm screws, stainless steel., distal radius t locking plate 3.5mm set with 3 to 7 holes on shaft of plate with 6 locking screw and 4 cortical screws, stainless steel., distal radius t non locking plate set 3.5mm set with 3 to 7 hole on shaft of plate with 8 cortical screws, stainless steel., clavicle locking plate set 3.5mm right/left (6-8 holes) with corresponding screws, ss., headless compression screws 2.7mm, self-tapping, cannulated, length 10-40mm,titanium, headless compression screw 3.5mm self-tapping, cannulated, length 10- 50 mm, titanium, headless compression screw 4.5mm self-tapping, cannulated, length 10 60 mm, titanium., 1.5 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.0 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, 2.4 mm cortical screws for fixation of small bones, low profile head, 8 to 16 mm length, star head, titanium *, radius intramedullary square nail set diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., ulna intramedullary square nail set, diameter 2.0mm to 4.0 mm and length 20 to 36mm, stainless steel., 3.5mm reconstruction non- locking plate set 4 to 14 hole with 8 cortical screw, stainless steel, 3.5mm reconstruction locking plate set 4 to 12 holes with 4 cortical screw and 6 locking screw, stainless steel., 2.7mm reconstruction non locking plate set, 4 to 14 holes with 8 cortical screws, stainless steel., orthofix external fixator, size- l/m/s/es, ss, dynamic screw measuring 9mm, ilizarov ring fixator set for tibia: one set consisting of 10 half rings (120 mm to 220 mm), plus one 5/8 ring (120mm to 220mm), 10 ring connecting bolts, 12 threaded rods(100 mm to 400mm), eight 1.8mm ilizarov wires(trocar/bayonet tip), six olive wires, 30 slotted bolts (centric/eccentric/schanz screw holding), 120 full nuts, 10 washer, two male and two female posts(one to four holes), four schanz screw 4.5mm/5.0mm, two male hinge and two female hinge. instrumentation to be provided along with the set must

Central Government/Public Sector

CTN :43030505

17 Dec, 2025 NA

Katipala - Karnataka

Tender For providing of custom bid for services - grass and weed growth control and vegetation removal inside mrpl refinery

corporations/Associations/Others

CTN :43052631

15 Dec, 2025 27.1 Thousand

Gaya - Bihar

Tender For supply of cuticle cutter , cuticle pusher , tip cutter , nail buffer , filer hard buffer , nails tips with box , glue 401 , pasting brush , top coat , base coat , dehydrate , primer , sun uv lamp 48w , art brush , detailing brush , acetone with pump 200mm , line free wipes , practice plate , electric nail fiile drill machine , builder gel , gel brush , acrylic powder , acryic professional powder , monomer 150ml , polygel tube 30ml , poligel tips 100pcs , polygel clips , slip solution polygel , polygel professional brush , dappen glass , half tip box each box contain 100 pcs , stone mix size , cat eye nail polish , nail colour remover , 6 in 1 cat eye magnet , uv sine base coat , matte top coat , 3 colour chrome power , nail polish gel red green pink black white yellow each color 1 pcs , wax heater , mehndi cone each box contain 12 pcs , hikari hasami seasor kainchi , mehndi head practice book , bleach termeric 500g , head massage olive oil

CTN :43026472

12 Dec, 2025 NA

Ganganagar - Rajasthan

Tender For supply of supply of mta stores c c - geyser rod for 25ltr water storage heater , ceiling fan 1200mm sweep , 20w led tube light 4ft complete set , desert cooler electric motor , exhaust fan 300 complete of pvc body , pvc connection pipe , led bulk head light 9w , 20 watt led bulb , curtain rod for windows with bracket , false ceiling panels , pvc flush tank pipe , window glass 1. 5ft x 1. 5ft , 5 pin 15 amp switch socket , led ceiling light 18w cool day light , 5amp switch , change over switch, 3 phase, 63 amp , looking mirror 450mm x 1500mm x 5. 5mm plywood back and frame , 5 amp s s combo , electric wire 1. 5sqmm , condenser for ceiling fan , tube light 18w , geyser plug socket , desert cooler water pump , mcb 32a sp , switch 5 amp piano type , switch mounting box 10way , mcb 16 amp double pole , water storage heater, geyser 25 ltr capacity , desert cooler 635mm x 597mm x 1143mm of ms body 500mm sweep , ewc with p trap including seat cover , cp water jet , looking mirror 60 x 45cm aluminum frame , wall mounting fan 300mm sweep , membrane filter , electric copper wire 2. 5sqmm , insulation tape , flexible wire copper , black screw 2 inch , 10sqmm service cable , 100 amp changeover switch , tapping screw star type 1inch , led bulb 9w , led flood light 100w , led flood light 50w , 100 amp 4 pole mcb , ro membrane , ro plant jumbo filters , ro chemicals, carbon , multi pot valve 1 inch , servicing charges , 0. 5hp motor pump , fiber sheet 10ft x 4ft , chequered steel plate 10ft x 7ft , 05 15 amp switch , 36w led tube light 4 ft complete set , mcb 63 amp db , bulk head light 9w , mcb db 8 way , ppgi sheet size 1070mm x 5600mm x 0. 63mm , cement opc 43 grade hdpe bag of 50 kg each , sand coarse , rain water pipe, pvc 110mm , aggregate 20, 40mm graded , curtain rod stainless steel 20mm dia , ventilator blinds for window 1915 x 1200mm , ventilator blinds for window 1091 ) /bid number: gem/2025/b/6958031 * /dated: 02-12-2025 & & / bid document1 / 81x 1091mm , pvc flushing sistern , air filter, cart part no 02. 542. 05. 0. 00 , fuel filter, cart part no f002h24468 , fuel filter, cart part no f002h20387 , oil filter, kfo 03 01 2436 , fan belt for genr set , control panel bd servicing , air filter, cart part no 04. 586. 03. 0 , fuel filter, 1 ltr cloth type , oil filter, kfo 03 01 2608 , water separator , 12v battery capacity 90ah , automatic voltage regulator , engine gasket set , generator set exhaust fan winding , air filter, cart part no 4071693 , oil filter, lf 16087 , air filter, cart part no 4h. 1198. 01. 0. 00 , tyres with tube for 62. 5 kva generator trolley , fuel filter, cart part no f002h20306 , water separator for 20 kva generator set , water separator for 30 kva generator set , oil filters for 30 kva , oil filters for 15 kva , fuel filter for 30 kva , fuel filter for 15 kva , control panel fuse , mcb 4 pole 100amp for panel bd , rubber hose for fuel , diesel biocide fuel treatment , bolt and nut assortment kit , copper benjo washer , 19mm benjo union , fuel flexiable pipe 2ft , air filter kit for 40kva, 62. 5kva , fip kit , tinkering work , suspension sys , hub arrangment , front rotating system frame work , welding and tinkering work , break system , led bulb 15w with angle holder. , switch 5 amps , switch socket combination 6 amps 5 pin modular , switch socket combination 16 amps 5 pin modular , ceiling rose , mcb 6 amp , 15 amp socket , pvc capping casing 25mm , 50watt flood lights , 1. 5sqmm cable , 2. 5sqmm cable , tarpin oil , olive green paint , sand paint , black paint , mattress , sintex water tank 1000ltr , jerri cane 35ltr , looking mirror 600mm x 600mm , distilled water , coolant for genr set , gi socket 15mm , gi socket 20mm , toilet paper holder , towel rail steel , pilar tap cp 15mm , float valve assembly , bib cock , stop cock 20mm brass , stop cock 15mm brass , shower rose , soap holder cp brass , curtain rods

CTN :43026487

23 Dec, 2025 4.90 Lacs

Kolkata - West Bengal

Tender For supply of clearing vegetation , excavation and surface preparation for pcc area , providing and laying 25 mm thick pcc with 20 mm aggregate included finishing and curing , repair and functional restoration of vapour traps , providing and laying gi water line to vapour trap, including trenching, supports, testing, laying, and backfilling

Central Government/Public Sector

CTN :43026891

13 Dec, 2025 1.99 Lacs

Chennai - Tamil Nadu

Tender For supply of paint pale cream fire retardant , paint olive green primer , paint navy blue , interlac 665 cll549 , paint fluorescent yellow , paint fluorescent red , paint fluorescent green , interlac 665 clb000 , paint silver , paint rfu inter deck , paint remover non-inflammable , paint red signal , paint red lead or red oxide

Central Government/Public Sector

CTN :43013590

30 Dec, 2025 90.00 Lacs

Delhi - Delhi

Tender For non structure repairs using guniting, micro concreting, ready mix plaster etc, repair to vertical stacks, removal of vegetation nad mechanical external periodical to high rise buildings in md accn in the area of b/r-iii under ge (west) delhi cantt-10

Vegetation Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector