Tender For corrigendum : invitation for annual rate tender for the procurement of electrical and lighting materials - electric choke 40 watts bulb 200 watt bulb holder aluminum wire 2.5 mm isi mark (havels/anchor). copper wire 2.5 mm heavy mark (havels/anchor) aluminum wire 3 mm heavy mark (havels/anchor). copper wire 3 mm thick mark (havels/anchor) copper wire 0.75 mm thick mark (havels/anchor). aluminum wire 6 mm heavy mark (havels/anchor). auto switch small unit auto switch buddy unit complete fracture led 24 watt (havells/philips/bajaj/kww/wipro) isi mark complete fracture led 36 watt isi mark (havells/philips/bajaj kww/wipro) auto day - night (separate-2) led light repair 30 watt led light repair 45 watt led bulb 5 watt (havells/philips/bajaj kww/wipro) led 8 watt (havells/philips/bajaj kww/wipro) led plate 26 watt led plate 45 watt led driver (choke) 24 watts led driver (choke) 25 watt led driver (choke) 36 watts led driver (choke) 45 watts led glass 24 watt led glass 25 watt led glass 36 watt led glass 45 watt ceiling fan bajaj cooler of iron (summercool) paste led cooled led 45 watt (havells/philips/bajaj/kww/wipro) raga plas (taparia) screwdriver (taparia) cutter (taparia) tools (taparia) sensor autocut main switch kilo watt sensor autocut main switch single main switch 63 to 200 ampere led light 25 watt automatic on off (isi marks) led light 45 watt automatic on off (isi marks) timer switch vaux 1 kw (isi marks) timer switch vaux 2 kw (isi marks) timer switch vaux 3 kw (isi marks)
Tender For supply, installation, testing and commissioning of 2 nos. 4 tr cassette type split air conditioners with automatic timer-based changeover system for ups cum server room, department of radiation oncology, aiims nagpur
Tender For fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 1. 80 mm i/d , installation of shallow/medium/deep tubewells as per is 2800:1991 development of tube well according to clause 9.3 of is: 2800-1991 (part-i) as amended up to date and specifications attached and as directed by the engineer-in-charge of the work including the cost of all consumable stores, fuel, oil, compressors, pumps and machinery etc. as required for the work. 1. compressor 450cfm x 250 psi , installation of shallow/medium/deep tubewells as per is 2800:1991 electric logging of tube well. , installation of shallow/medium/deep tubewells as per is 2800:1991 supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 2. 15 hp motor
Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d , installation of shallow/medium/deep tubewells as per is 2800:1991 supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 5. 30 hp motor ,. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm
Tender For comprehensive warranty extension of transportation engineering lab equipment - 1. rolling thin film oven 2. constant temperature waterbath for marshal test with digital controller-(9 moulds)-(150 mm). 3. standard penetrometer for bitumen-automatic digital timer with geared height adjustment & dial gauge - astm d5 4. marshal stability testing machine-digital-4" & 6" dia-combined 5. stripping test apparatus-is 6241, aashto t283 6. ductility testing machine - (semi automatic model) -(10-100 mm/min speed) -(refrigerated)- 7. planetary mixer-for bituminous mix-digital-10 ltrs 8. sieve shaker-gyratory-for 20/30 & 45cm dia sieves with digital timer 9. buoyancy balance 10. bitumen extractor-motorised with variable speed with digital rpm indicator 11. ring and ball apparatus-(programmable) -(digital) -(astm d36) with accessories 12. hot air oven - digital-90x90x60 cm-250c-inner s.s. 13. rotary vacuum evaporator with motorized lift-flask capacity-50-5000 ml 14. automatic compactor for marshal test - (4" and 6" dia specimen)-(universal model)- 15. cleaveland flash point apparatus-with energy regulator 16. absolute and kinematic viscosity bath for 4 viscometers (astm d2171, astm d2170) at indian institute of technology
Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu
Tender For providing and fixing of contractor block and other electric components at various t wells in sector 5 panchkula - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 20.114.9:- supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 9. 50 hp motor [through rate], 20.10.3 :- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3 :- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 3. 150 mm i/d [through rate], 20.84:- providing and fixing of insulated rubber matting suitable for 11 kv installation 1 m x 2 m x 12 mm thick (is code 15652-40091) as per specification complete and as per directions of engineer-in-charge [through rate], ns item:- providing and fixing of contractor block mnx 80 landt make as per satisfaction of engineer-in-charge and attesting on load, ns item:- hiring of electronic borewell camera for videography 350 deep borewell urgently required for internal photography complete in all respect to the entiresatisfaction of engineer-in-charge, ns item:- measurement of discharge at tubewell of 1 hr after opening of upper bend with help of discharge flow meter including dismantling and reassembling of tee bend with help of chain block labour tool and plantcomplete in all respect (note any damage to site and material is responsibilityof the contractor)
Tender For corrigendum : annual tender for 2026-27 street light material supply in achirapakkam town panchayat - 40 watts fl tube light, 40wattsvpitcopperchoke, 40watts starter, side holder, street light aluminium fittingwithchokes,bulb& starter, 1*40 street light accessories, 1*40 w street light fitting cover, 1*40w sideholderbase, 20 wled 4feet tube light fittings, 24 w led 4feet tube light fittings, 28 w led 4feet tube light fittings, 30 w led 4feet tube light fittings, 36 w led 4feet tube light fittings, 40 w led 4feet tube light fittings, insulationtaperoll, 7/16 pvc insulated copper wire, 7/20 pvc insulated copper wire, 3/20 pvc insulated copper wire, 1/18 pvc insulated copper wire, 25 sqare mm 3 ½ “ ug cable, 50 sqare mm 3 ½ “ ug cable, hook up wire (patty wire), 2 core service wirw, 1/18 aluminum wire, 3/20 aluminium wire, 7/20 aluminium wire, 7/18 aluminium wire, 7/20 gi wire (service wire), 16 amps fuse unit, 32 amps fuse unit, 63 amps fuse unit, 100 amps fuse unit, 200 amps fuse unit, 500 amps fuse unit, "16amps dp switch with metal clad(fronthandle)", "32amps dp switch with metal clad(fronthandle)", "16amps dp switch with metal clad(sidehandle)", "32amps dp switch with metal clad(sidehandle)", "100amps tpn switch with hrc fusessheet steel double break", "125amps tpn switch with hrc fusessheet steel double break", "200amps tpn switch with hrc fusessheet steel double break", "315amps tpn switch with hrc fusessheet steel double break", "400amps tpn switch with hrc fusessheet steel double break", "16amps tpn metal clad swtich with re-wirable fuse units", "32amps tpn metal clad swtich with re-wirable fuse units", "63amps tpn metal clad swtich with re-wirable fuse units", "100amps tpn metal clad swtich with re-wirable fuse units", "200amps tpn metal clad swtich with re-wirable fuse units", procelain holder, peengan holder gls holder, "5000 w street light automatic on/offswitch iso:9000 – 1 set.", timer auto set, 1” pvc wiring pipe, 1”pvc wiring bend, 32mm service pipe set, 40w tl fitting street light clamp set, cable tag, e.b.rccpoleclampsetwithbolts&nuts1set, bi-metalicclamp3/20, bi –metalicclamp7/20, chokescrew, dbswitch, 25 ams bch contact set, eb service g.i box, g.i switch box (service box ), wooden plank for meter board, wooden plank for ariel board, 3/4” g.i bended pipe (suitable for led fitting), 1” g.i bended pipe for (suitable for led fitting), 1 ¼” g.i bended pipe (suitable for led fitting), 2.5 sq.mm 3 core copper flat cable, 4 sq.mm 3 core copper flat cable, 6 sq.mm 3 core copper flat cable, 10 sq.mm 3 core copper flat cable, 16 sq.mm 3 core copper flat cable, 20 w led street light fittings, 25 w led street light fittings, 30 w led street light fittings, 40 w led street light fittings, 45 w led street light fittings, 48w led street light fittings, 60 w led street light fittings, 70 w led street light fittings, 72 w led street light fittings, 80w led street light fittings, 120 w led street light fittings, 150 w led street light fittings, "70 w led street light fittings withdimmable driver", "72 w led street light fittings withdimmable driver", "90 w led street light fittings withdimmable driver", 120 w led street light fittings with dimmable driver, 150 w led street light fittings with dimmable driver, 100 w led flood light with dimmable driver, 120 w led flood light with dimmable driver, 150 w led flood light with dimm11864able driver, 200 w led flood light with dimmable driver, 100w led flood light with integrated driver, 120w led flood light with integrated driver, 150w led flood light with integrated driver, 100w led high bay lights fitting, 150w led high bay lights fitting, 200w led high bay lights fitting, "120w : 6500k : led ip65 : solar streetlight fitting", "40w : 12.8v : ip65 havells street lightfitting", "40w : 6500k , 10000mah : 10w panel :ip66 sensor type", "60w : 6500k , 15000mah : 15w panel :ip66 sensor type", "100w : 6500k , 20000mah : 18w panel :ip66 sensor type", 25 w led driver, 25 w mcpo cp w