Latest vehicle paint Tenders | Government vehicle paint Tenders

CTN :45435126

13 Jun, 2026 NA

Amritsar - Punjab

Tender For bid to ras providing of professional painting service - painting of radar sensor vehicle; painting of radar sensor vehicle; vehicles

State Government

CTN :45482296

13 Jun, 2026 49.9 Thousand

Nadia - West Bengal

Tender For notice for the vbgram materials supply - supply of first aid box including medicines (specified by pia) at, model citizen information board for ibs( specification-made of, with a height of 3ft, width 2ft and thickness of 4 inch & 30 degree, head with pentagonal shape including fixing the mgnrega, biswa bangla logo in upper side of the board and supply in, mgnrega worksite anywhere., model citizen information board for community (specification-, of brick structure with plastering and colour ( back colour, and black for writting) with a height of 4ft, width 3ft and thickness, 4 inch & 30 degree in head with pentagonal shape including fixing, the mgnrega and biswa bangla logo in upper side of the board, supply in the mgnrega worksite anywhere., g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size, mmx47 mm with a wall thickness of 5 mm, made out of extruded, mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated, factory made solid panel pvc door shutter consisting of outer, made out of m.s. tubes of 19 gauge thickness and size 19 mmx19, mm for styles, top and bottom rails, m.s. frame shall have cost, steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame, made of flat bent bar, end bifurcated with necessary screws etc., cement concrete(1:2:4) as per direction. (cost of concrete will be, paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured, from extruded section conforming to i.s. specification (i.s. 205/66), and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x, 4.0mm, anodised aluminium barrel / tower / socket bolt (full covered) of, approved manufactured from extruded section conforming to i.s., 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm, long x 10mm dia. bolt., anodised aliminium d-type handle of approved quality, manufactured from extruded section conforming to i.s. specification, (i.s. 230/72) fitted and fixed complete: (a) with continuous plate, base (hexagonal/ round rod) (iii) 100 mm grip x 12 mm dia rod., (c) supplying 6 levers 'godrej' crystal satine mortice lock with keys, including fitting & fixing complete., i) iron hasp bolt of approved quality fitted and fixed complete, (oxidised) with 16mm dia rod with centre bolt and round fitting. (, 200mm long, door stopper.(brass), red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings, conforming to is-13592-1992 (a) (i) single socketed 3 meter length, (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings, conforming tois:13592-1992 with all necessary clamps nails,, including making holes inwalls, floor etc. cutting trenches in any soil, through masonry concrete, structures etc if necessary and mending good damages including, joining withjointing materails (spun yarn, valamoid/bitumen/m-seal, etc) complete. a) upvc pipes: (ii) 110 mm. dia., s, d) shoe (ii) 110 mm. dia, qgs seed(10 variety), g.i. hollow pipe squre or

CTN :45457878

17 Jun, 2026 3.36 Lacs

Subarnapur - Odisha

Tender For new ib building at sonepur_building - finishing wall with weather coat of approved quality two coats to give an even shade with brush to outside wall surface after cleaning surface including cost of paint watering and curing cost conveyance and taxes of all materials and labour,cess with t&p required for the work etc. complete in all floors., providing and fixing chequred tiles in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, t&p and cess etc. complete in all respect as per specification and direction of the engineer-in-charge., 32mm piasal wood or local teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. but excluding the cost of iron fittings., providing, fitting & fixing up partition walling oel aluminium anodised section no. 9210 and 9207 as single groove and double groove respectively as horizantal and vertical member and oel section 4660 as tapered clip for fixing up 12mm thick prelaminated board (nova pan make) and jointing angle no.1855 etc.(12mm thick novapan prelaminated bead), fly ash brick masonry in c.m (1:6) including cost conveyance royalty of all materials., providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of engineer-in-charge., providing c.c. (1:2:4) using 12mm size hard granite crusher broken chips including all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of engineer- in - charge., dismantling and removing doors, windows and ventilatoras including removal of frame,hinges and stacking the same for re-use and removing the debris within 50mtr lead etc complete., supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section no.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour t & p etc complete as per direction of enginner -in charge., providing , fitting & fixing of al. door with oel anodized al. door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick prelaminated board in botttom portion fixed on door frame by means of tapered clip no.4660 and frame to be completed bt means of jointing angle no.1855 including all cost of labour t & p hire charges of drilling machine labour charges etc complete.

CTN :45449505

08 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For providing of professional painting service - painting of common user vehicle; painting of common user vehicle; vehicles

CTN :45448080

26 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of provn of prefabricated store shelter , pvc insulated cable copper conductor 1 point 5 sqmm in 90 mtr roll , pvc insulated cable copper conductor 2 point 5 sqmm single core in roll , pvc insulated cable aluminium conductor 6 sqmm , flexible wire 23 oblique 76 copper conductor , pvc casing capping 25 mm wide 2m long , ms screws 6mm x 19 mm , ms screws 4mm x 19 mm , ms screws 6mm x 40 mm , switch piano type 6 amp , switch and socket combination 5 pin 5 amp with pvc gang box , switch and socket combination 15 amp 5 pin with pvc gang box , main switch 32 amps obelique 240 volt dp , mcb 6 amp sp , mcb 10 amp sp , mcb 32 amp dp , angle holder , led bulb 14 w , led tube light fittings of 20w strip batten fittings complete , ceiling fan complete with blades , bulk head fitting of 18 watt with complete accessories , fr electrical insulation tape , ceiling rose 6 amp pilot 02 plate , change over switch double pole 32 amp , mcb box 6 way spn , rectangular wooden switch board with hylam sheet on top , pvc round block , exhaust fan 450 mm sweep , pvc switch board 6 points , earthing set complete , prefabricated gel earthing electrode of pipe in pipe technology , air termination single pointed copper rod 12mm dia and 300mm long , gi pipe 100mm dia 2 m long medium grade with base plate , back fill compound , ci manhole cover of size 30cm x 30 cm with handles , aluminium strip 25 x 3 mm , gi strip 32 x 6 mm , insulator for fixing down conductors , integral water proofing compound , synthetic enamel paint white colour 1st quality , synthetic enamel paint og colour 1st quality , synthetic enamel paint brown colour 1st quality , red oxide zinc chromate primer for metal surfaces , wooden primer white colour , taurpentine oil , oil bound distemper in off white colour , weather coat exterior emulsion , panting brush 50 mm size , mild steel chromium plated 25mm dia and 3mm thickness , fan hook made of 12 mm ms round bar to be hanged from purlin , ms binding wire 0 point 90mm dia , texture finished gypsum board false ceiling panel , chair office cushion , office table steel , steel racks , pvc chair with arms , mild steel dunnage , de spanner set size all type , hand gloves leather streatcheable with wollen inner first quality , brick trowel steel , mortar pan steel , measuring tape 15m long steel , shoval with plastic handle and plastic d grip and carbon steel blade , axes picks 3 kgs for digging with wooden handle , plier cutting 200mm for barbed wire , mild steel material handling trolley of size 1200mm x 600mm x 300mm , mild steel semi automatic portable concrete vibrator needle , portable concrete mixture machine

CTN :44778628

05 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of officers tea room at sauw ins satavahana d d - customised table top for coffee or tea kettle microwave induction cook top size 5 ft 3ft with multi drawers for storage of utensils , fabrication of customised wall mounted storage space 6ft x 1.5ft with 2 stacks for crockery and other utensils with 2 stacks for crockery , customised wall mounted display case of 6ft x 1.5ft of three stacks with glass enclosures with locking arrangement , customised 2mm thick blackout double layered zebra blinds with open or shut mechanism , wall paneling wit charcoal or pvc profiles , anti termite hadr material wall paneling , light emitting diode 75 inches diagonally visual display , customised wooden book or magazine shelve , laying of fine finish putty and finishing with royal emulsion coat , laying of electrical cales, metal boxes, control units and sockets for profile illuminations, hanging illumination, spot illuminations and diffusers and other necessary power related materials , customised tough end glass enclosures with shut and close hydraulic mechanism and other accessories with wood wall paneling around the enclosure , customised cushioned seating arrangemens with fine fabric finish seater , customised solid teak wood table with fine polish finish , customised step design and profile weather proof ceiling fabricaed with high density galvanized channels and 12mm thick gypsum sheet , fabrication of customised wall mounted covering arrangement for network switches with door and top mounted exhaust fans ) /bid number : gem/2026/b/7346120 * /dated: 07-04-2026 & & / bid document 1 / 15

corporations/Associations/Others

CTN :45411059

10 Jun, 2026 NA

Leh - Jammu And Kashmir

Tender For auction sale of tarpauline old,mfm scrap,mt scrap,fire ext os,boot ri,woolen rags,coat ecc,gen set 5 kva,helmet fiber,mattress millet,mattress kapok body,bag sleeping ecc,mt component,boot scarpa,bag sleeping,tlss 3rd layer upper,tlss 3rd layer trouser,tentage old,iron scrap,rubber scrap (tube & flap rust),textile rags,pancho glacier,gloves,drawers shirt cold weather,under shirt cold weather,coat ecc & e,gen set 1 kva,it scrap

corporations/Associations/Others

CTN :45386360

08 Jun, 2026 4.67 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing of open air gym equipments in various parks of sector 20,chandigaarh under ward development fund. - providing and fixing of chest press double size / dimensions length -1200 milimeter width- 700 milimeter height 1800 milimeter maximum weight -120 kilogram material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure strength, durability, and corrosion resistance. the main central pipe shall be an 80 mm nb gi pipe, while the handle frame and sheet frame shall each consist of 40 mm nb gi pipes. the connecting links shall be made of 32 mm nb gi pipes, and the footrest pipe shall also be 32 mm nb gi. the mild steel (ms) foundation plate shall have a minimum thickness of 12 mm. the foundation pipe shall consist of a gi pipe anchored 750 mm deep and supported with an ms angle of 25 25 4 mm for stability. the seat and backrest shall be made of high-density polyethylene (hdpe) sheets with a thickness of 3 mm, designed with a uniform bending radius to avoid sharp edges and ensure user safety. all nuts and bolts used for assembly shall be made of galvanized iron (gi) to enhance durability and resistance to corrosion. the movement mechanism shall be fitted with ball bearings that are self-lubricating and sealed to protect against rain, dust, and other environmental elements. the closing caps of open ends of all pipes, as well as bearings, bushes, and bases, shall be covered with fibre-reinforced plastic (frp) closing caps having a minimum thickness of 3 mm. all plastic components shall be uv-stabilised and weather-resistant to ensure long-lasting performance in outdoor conditions. colour:- green paint finish- power coated, uv resistant paint coating thickness (min) 100 micrometer warranty 3 years. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of leg press leg shaper complete in all respects having following specifications. a) all pipes should used in the equipments should be galvanised with 3mm thickness. b) multi colour powder coating with polyster paints should be used on all the equipments. c) the foot pedal on all the equipments should be of aluminium only. d) the seats should be made of high quality plastic with colour scheme in yellow or orange. e) the high end bearings such as skf/nbc must be used in all the equipments. 1 dimensions- 1730*450*1450mm 2 colour- customizable multi colour and complete powder coat 3 size of main tube-114*3.75mm steel pipe 4 size of supporting tube-76*3mm steel pipe 5 there is restrainer inside, the distance between swing arm and main tube is greater than 230mm avoiding the danger of getting stuck. 6 al alloy protecting covers are used at the top other main tubes to protect from the rainwater 7 anti-skid components are used at the pedal parts. 8 the distance between two spinners is no less than 230mm, avoiding the damage of being stuck 9 anti theft cover is made by stainless steel/high quality plastic. 10 thickness of bearing bracket is no less than8mm 11 hazardous materials like coating agent, rubber are under national newest standard. functions: develops the strength of lower limbs, and improves the stability and agility of three main joints of lower limbs; good for the healing of inconvenience of bending and stretching of lower limbs, and muscular atrophy of lower limbs, rheumatoid arthritis, sciatica, sprain of the anklebone, etc. approaches: sit on the chair and step on the footboard. stretching legs with force and recover slowly. repeat. users: suitable for people of different ages. complete in all respects, including installation of equipment in a cement concrete block of size 5 x 5 x 1 , to the entire satisfaction of the engineer-in-charge. , providing and fixing of parallel bars size/dimensions length- 900 millimeter height 800 millimeter material:- all the pipes shall be galvanized iron (gi) and isi marked to ensure s

Central Government/Public Sector

CTN :45384656

13 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, copper wound 11

CTN :45224771

01 Jun, 2026 NA

Kutch - Gujarat

Tender For bid to ras supply of weather coat apex paint , oil bound distemper , 7.5 kva oil filter , 7.5 kva diesel filter , battery 12v 88ah make exide amaron , battery 12v 130ah make exide amaron , 30 kva genr armature repair , 7.5 kva genr armature repair

Vehicle Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector