Tender For auction sale of rolling stock - scrap condemned wagon 10 wh bg- 1.se 25079660405 boxnr less items-door rester- 4,door-2,hand brake wheel-1,d.carriar-1. 2.ser 25079634710 boxnr less items-sab-1,hand brake wheel-1,e/l device rod with bracket-1,hand brake connecting link with lever-1, live/dead lever-1. 3.nr 30038904056 bcnm1 less items-d.carriar-2, foot step-1.
Tender For supply of modified hand brake assembly (gear type ) as per rdso drg no.sk.dp.-3947 alt.nil. or latest. item is at sr. no. 5, chain should be 130 link (approximately) instead of 85 link. [ warranty period: 30 months after the date of delivery ]
Tender For supply of chain with link and dowel for modified hand brake assembly (gear type ), materialspecification - steel is 2429, as per is:2429 as per rdso drg no.sk.dp.-3947 alt.nil. or latest. item is at sr. no. 5, chain should be 130 link (approximately) instead of 85 link. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.
Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.
Tender For supply of tail lamp assy : : - tail lamp assy , cover outer 235 70 , front brake pad , fuel filter cartridge , filter cartridge nef , head light relay , main relay , clutch plate , sleeve cyl assy , clutch release bearing , oil filter , belt fan timing , belt alternator , hand brake cable , steering set assy rhd , main gear oil seal , door lock , drum rear brake , front disc , front wheel hub assy , link rod front , link rod rear , front coil spring , assy water pump
Tender For auction sale of depot ferrous scrap - scrap heavy melting components consisting of items, pcs. and cut pcs. of plates, angles, silent block,side bearer pad assembly ,metal rubber bonded,bp valve fp valve ,cut pcs of metal,channels, bss hanger,bump stop,parting plate,rounds, back-stop, pu pad,bk-head spindles, connecting- links, rotory lock, , cut of angle cock, pins, dirt collector, brake head,, face plate,brake , anchor link,control rod,dummy coupling,shackle pin, yoke pin, safety wire rope,draft gear pad,axle guard with horn check,different type of levers,screw coupling,draw bar hook, bk beam hanger,empty load box, c.c. pad top & bottom,side bearer,stricker casting,yoke support plate, horizontal lever set, main pull rod, empty tie rod, hand bk screw, hand bk gear box,toothed segment,dirt collector, protactiv tube, sleeve, axle box guide, isolated cock and mixed with pins and u/s broken parts of c&w item etc of sorts & sizes with or wo attachment us and ur, as it is. loc- lying at bg-6 in scrap yard judw. remarks- [1]loading by purchaser. note-nfs will be taken back if found in lot at the time of delivery
Tender For auction sale of rolling stock - ms scrap cut of condemned wagons 8 wheeler (bg) with out wheel set and trolly , delivery on nagra siding condition, wagon no. (1)nr 81038460417 bwta (2) cr 81018460123 bwta (3) nr 81039218673 bwta (4)nr 81039060166 bwta. note : delivery on actual weighment basis maximum permissible deliverable qty is lot qty 04 nos(78.020mts). returnable items(1) buffer plunzer (2) buffer socket (3) draw bar hook (4) draw bar key (5) screw coupling (6) draw bar spring (7) rubbing block(8) draft link (9) hand brake screw rod with bracket & with leave bush (10) hand brake spindle rod long and short with bracket , note -cutting allowed for easy loading returnable items will notbe delivered and willbe returned by the purchaser lot qty 04 nos(78.020 mts) on approx basis , advice note no.25-03391 dt-20.03.26 and 25-02013 dt-13.11.25 note: wagon lots to be sold on number basis and delivery in mts basis. purchaser sould read the nagra siding condition of special condition of e-auction governing the sale at page 13 (r) page 17 and satisfiy them selves before biding.
Tender For auction sale of others - released and u/s various condemned ferrous scrap of sse/cnw/oec/vskp containing miscellaneous :worn out and broken parts released items i.e. ms sheet (released) pieces connecting link, operating shaft sab(bad), dirt collector, hand brake wheel, knuckle pin hand brake head, yoke pin support plate, bearing pin (with chaft h waher & split pin), adjustable lever assembly, square shaft, hook pivot pin, secondary lock hook,, cylinder rod clevis assembly with pin washer & split pin), screw coupling, eye bolt with nut lock, end pull rod/short pull rod, safety handle /lock hook, centre door locking lever, door connecting link, turn buckle, control reservior (released), operating lever assembly, pin for clevis and (with washer and bulb cotter celvis assembly), nut lock, cut off angle cock, thrower, follower plate coupling common pipe hand , side buffer socket with plunger yoke pin support plate horizontal lever hand brake lever quick coupler, coil spring outer & inner snubber spring side bearer outer & inner bearing pin, end pull rod, lsd. total auctioned quantity of ferrous is 20 mt. hsn code - 72044900 and gst-18%. [sr. dme/wats lr. no. wms/misc.scrap/vsps/csl/oec/801, dt- 12.03.2026]. sale and delivery by weight.