Latest ventilated animal caging system Tenders | Government ventilated animal caging system Tenders

Central Government/Public Sector

CTN :45307540

16 Jun, 2026 NA

Moradabad - Uttar Pradesh

Tender For corrigendum : providing of custom bid for services - hiring of data entry operator over mb division for round the clock operations of icms cois fois rail madad cpgram rti safety cell feeding of block and disconnections asset failures etc in the coa system for two years

Central Government/Public Sector

CTN :45545702

30 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of reflective safety jackets conforming to specification no. is 15809: 2017 or latest. [1] only isi marked item is acceptable. [2] size: as per requirement. [3] design: as per annexure e, [4] vertical and horizontal retro reflective strips of 50 mm width that can sustain minimum 50 wash, at jacket all around on front and back as per attached drawing ( annexure - e), with printed reflective logo of central railway of size at least 6 inch diameter or 20 cm x 15 cm on back side on the jacket and two labels of size 5cm x 15 cm at front. printing matter: central railway /madhya rail (in hindi) or as per user requirement. retro reflective materials shall confirm to the performance requirements as specified in is 15809:2017 or latest. [4] background fabric: warp-100% polyester and weft-100% cotton (overall blend composition-polyester 65 plus or minus 3% and cotton- remainder), colour - fluorescent orange- red (type -2) weave background fabric - 5 end warp satin mass - background fabric (g per square mtr.) - 190 to 200 g [5] pocket: two patch pocket on both side of the zip in front bottom of the jacket, stitches in the garment using same background material, color: fluorescent orange, size: 15 cm x 15 cm (plus or minus 1.5%) as shown in annexure e. [6] zipper: plastic/nylon vislon, normal open end, type c, heavy (h) designation and auto lock type in orange colour matching with background material, confirming to is:14181 (part-i)/2002 or latest with amendment no.1 & 2 and tested as per is:14181 (part-ii)/2002 or latest. [7] marking & information on each piece: as per is 15809:2017 or latest. i. care label : cleaning (washing/dry cleaning) instructions shall be indicated either in hindi or english. ii. instruction for use : written information shall be provided together with the garment on instructions for use

Central Government/Public Sector

CTN :45550650

17 Jun, 2026 NA

Multi City - Karnataka

Tender For auction sale of depot ferrous scrap - lot consisting of condemned rubbles including slag dust, waste foundry sand and refractory bricks as available in the lot area except loose ferrous items. delivery will be given from road approaching point in one direction only note : purchaser should lift all the residuals as available in the lot including rubbles, ash content, mud etc., while delivery. material from the lot shall be lifted from one end removing rubbles, mud, ash content by scooping all simultaneously. no loose ferrous items such as wheel cuts, axle end cuts, runners, raisers, rail cuts, pipes, angles, channels, rods, sheets etc., will not be permitted for delivery. purchaser can inspect the materials thoroughly before e-auction. purchaser are requested to take sufficient safety measures while loading and purchaser should arrange all safety equipment for workers engaged while loading into the trucks. delivery unit : in mt

CTN :45512690

02 Jul, 2026 4.28 Crore

Visakhapatnam - Andhra Pradesh

Tender For supply of 25vkpc006 c c - brush bracket assembly for 19 kw motor , fan , sw temp gauges , sight glass part no. 06001 avail.as com.as.kit-item-209 , set shut-off valve nw38 part no. 08398 , set of gaskets for condenser 20tr ac plant for ekm submarine , tube for evaporator for 20 tr ac plant for ekm submarine , 3 way isolation valve for pressure gauges , refrigerant piping fittings 20tr ac plant for ekm submarine , rear outer bearing cover , sw pressure gauges , temperature gauge 100 dial -30 to 50 deg c , starter cum control panel for20tr ac plant for ekm submarine , terminal connectors with din rail 35 wago 6 sq mm 282-101 , synthetic ref oil savsyn2068 , gasket cover window he side , gasket cover window filter side , gasket cover top hsg dist. block , gasket cover top hsg manifold block , nut hex m24x3 , bolt hex std m20x2.5x120l , fan , compressor discharge temp gauge , compressor suction temp gauge , mccb merlin gerin 160 a 4 pole ns160n 4p30640 coil 24v dc , starter card elmot for 45 kw dc panel , terminal block for 5.5 kw motor , core for filter drier , rubber bellows for sw pump discharge , rubber bellows for sw pump suction , shaft for sw pump , mechanical seal for sw pump , pressure gauge 65 dial -1 to 15 kg-cm2 for r134a , oil seperator danfoss oub 4 for 2 x 2.1 tr ref plant , sea water pump be pump a3610m for 2 x 2.1 tr ref plant , solenoid valve danfoss evrs3-24 vdc coil , thermo exp valve sporian w je-80 jc charge 1-5-8x1-5-8inch ods , rotor setl/d 1.45 part no. n0900408030 , metaflex coupling for compressor for 144 tr ac plant , valve check type 125 nb wafer type , core for filter drier sporian rc10098 , thermostatic expansion valve danfoss teat 85-33 , shock mount irmra akcc-400e , valve plate assembly part no-08436 , set shaft seal part no 08008 , set oil pump part no 08044 , set piston dia 70 part no 08035 , set gaskets part no 08072 , set connecting rod part no 08307 , set oilsump heat 80w 220-240v part no 08425 , set capacity regulator 24 v dc , set of v belts , oil separator danfoss oub 4 for 2 x 2.1 tr refrigeration pla , valve angle type 1-2inchntp(m) x 1-2inch flare , safety valve 1-2inchnpt m set pressure 12.5 kg-cm2 r134a , valve angle type 1-4inch ntp m x 1-4inch flare , thermostatic exp valve gfe-1-2jc charge 1-4inch x 1-2inch flare , thermostatic exp valve gfe-1.1-2jc charge 1-4inch x 1-2inch flare , vibration eliminator 5-8inch ods , vibration eliminator 1-1-8inch ods , temp switch danfoss rt34-25 to 15 deg c , hrc fuse link ge ns4 4a with nh type fuse base , control transformer tape wound 415 v/110 v 150 va , filer drier core , safety valve condenser , liquid injection solenoid valves , hex head screw m6x125l , lp-op cutout mp55r r12-r22 , horizontal shell and tube type condensor , brazed plates type direct expension r134a evaporator , safety relief valve for condensor , thermostatic expansion valve , open end spaner set , temperature transducer , compressure suction pressure gauge , compressore discharge pressure gauge , element complete with o ring , pump trailing pompe pollard type 100 pr-60-100 c-g-n , direction of control valve with manual override

CTN :45543584

27 Jun, 2026 NA

Kupwara - Jammu And Kashmir

Tender For supply of high security weld mesh panels of size 2600 mm x 800 mm as per tech spec att , punched tape concertina coil 850 mm with 18 loops as per tech spec att , punched tape baby concertina coil including spike and handle have 56 turns with diameter of 610 mmas per tech spec att , fence post type circular hollow section length shall be 3 point 4 mtrs as per tech spec , truss support post with rail end cap type 76 mm dia with 3 mm thickness as per tech spec att , truss support post with rail end cap type rail end cap fitting of 76 mm as per tech spec att , straining y-arm for supporting top ptcc as per tech spec att , intermediate y- arm for supporting top ptcc as per tech spec att , razor running tape 2 point 5 mm dia length of each coil shall be 95 mtrs and weight of each coil shall be 9 point 2 kg as per tech spec att , omega clamp - 89 mm dia 35 mm width 3 mm thickness as per technical specification att , accessories for fitting truss support post brace band - 89 mm, 41 mm width, 4 mm thickness as per tech spec att , accessories for fitting y arm mushroom head bolt with breakable head safety nut m8 x 120 as per tech spec att , eye bolt with loop nut m8 x 100 of material ss 304 conforming to is 6911of 2026 as per tech spec att , anchor rod 10mm dia 300mm long gi rod tie with fence post as per tech spec att , tie wire 1 point4mm dia of 100mm length wire coformig as per tech spec att , flat clamps for panel connection flat conforming to is 2062 of 2011 as per tech spec att , ss 304 mushroom head bolt m8x25 sheet metal is 1730 is of 8535 - 1987 material of ss 304 as per tech spec att , high security weld mesh panels 2600 mm x 1000 mm with weight of 11 point 02 kg as per tech spec att. , punched tape concertina coil of 1050 mm with 18 loops as per tech spec att , fence post type circular hollow section length shall be 2 point 8 mtrs and weight shall be 15 point 02 kg as per tech spec att , across fence post clamp - 76 mm dia, 35mm width, 3mm thick material ms with hot dip galvanized to 350 gsm as per tech spec att , mushroom head bolt with breakable head nut m8x50 as per tech spec att , ptcc rod 10 mm dia 2 point 64 mtr long ms rod as per tech spec att , post cap as per tech spec att , brace band-76 mm 41mm width, 4mm thick material ms with hot dip galvanized to 350 gsm as per tech spec att , rail end cap of ms as per tech spec att , hog ring as per drawing. to secure ptc coil to ptc coil and also ptc coil to panels. wire dia 3mm as per tech spec att //bid details 2 / 69

CTN :45175967

15 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For bid to ras bid to ras supply of piston , circlip piston , piston pin , piston rind std , cylinder linner std , main bearing 010 , big end bearing 010 , cam bush std , sleeve o ring , thrust washer std bm , cr bush std , valve inlet and exhaust , valve guide , valve seat ring intake , valve seat ring exhaust , valve stem seal , oil seal crank shaft front and rear , oil jet with packing , engine gaskit set overhauling complete with gaskit and tappet cover packing , oil filter element , oil pump assy , belt alternator , timing chain assy , clutch disc assy , chain guide set primary and secondary , chain tensioner assy , guide tensioner type assy , oil strainer , thermostate valve , crank sensor , fuel return pipe injector , fly wheel assy , clutch cover assy , bearing clutch release , pilot bearing , fuel filter head assy , fuel filter assy with sep , element primary air , safety element , water pump assy , fuel filter assy , oil pressure switch , temp sensor , egr valve , valve tappet guide , push rod , radiator assy , cooling fan with thermo clutch , vaccume modulator , fip , injector , brake acctuator rear , turbo charger assy , oil return pipe rubber hose , hose pipe set , solenoide switch self 12v , copper brush gear plate self , copper brush set , gun metal bush set , voltage regulater , rail pressure sensor , water in fuel sensor , tensioner roller , engine mounting lh , engine mounting rh , wipper blade , brake dual valve , steering rod with cross , acc pedal , front axle bearing , front axle oil seal , crown wheel front axle , pinion front axle , side view mirror lh rh , concentric slave cylinder , shock absorber assy front , shock absorber rear , rear brake shoe , hand brake cable frt , hand brake cable rear , shocker gas stud hood , propeller shaft 4x4 , fuel injection pump , uj cross , ignition switch , wiper blade front , wiper blade rear , fan belt 4pk 1171 , fan belt 4pk 1115 , wheel cylinder frt rr , suspention bush kit comp front , suspention bush kit comp rear , vaccum moduler , clutch master cylinder , brake master cylinder , fuel filter , ac filter , oil filter , air filter , disc pad front , pipe overflow injector with lock , head gaskit , ball joint upper lower , tail light assy lh rh , reverse light switch , supporting stud intercooler , bleeder clutch slave cylinder , drain plug , vaccume booster , head lamp bulb h7 h1 , self stater assy , self copper brush , self solonoid switch , self bendix pinion , alternator regulator , carbon brush set , wheel stud with nut , hub front comp lh rh 4x4 , wheel bearing front , axle boot kit rubber , water hose plastic with o ring , fog light assy , axle seal front lh rh , fan belt , rear view mirror lh and rh , rear brake shoe set , head light bulb h7 , fuel pump , wiper blade //bid details 2 / 108

Central Government/Public Sector

CTN :45474981

26 Jun, 2026 14.85 Lacs

Bangalore - Karnataka

Tender For technical bid for supply of hvac operational spares , bearing (6206) size: od, 60 mm x id 50 mm ball bearing desig: 6001-z, ball bearing desig: 6307/2z c3 universal hvac/r controller, armoured 4 core x 6 sqmm xlpe copper cable. 1 sqmm frls multi stranded copper cable (single wire), 10 sqmm frls multi stranded copper cable (single wire) 4 sqmm frls multi stranded copper cable (single wire), fibre glass insulated copper wire for heater size: 6 sqmm, alkaline battery volt: 9vf sealed maintenance free (smf) lean-acid battery 7ah 12v, brush width: 3 inch for painting work. loctite 495 adhesive, kiwi drain cleaner heavy duty industrial safety gloves - cut-resistant (mechanical work), spray foam insulation (pfu) can qty: 750 ml wd 40 multipurpose spray size: 500 ml, green paint (bus green synthetic enamel black paint (synthetic enamel), ms flat bar size: 40 x 5 mm ms l- angle size: 25 x 25 x 5 mm, ms l- angle size: 40 x 40 x 5 mm metal primer (red oxide), black color spary paint 400 ml thread repair helicoil insert ss-m18 x 2.5mm x 1.5d, thread repair helicoil insert ss-m20 x 2.5mm x 1.5d thread repair helicoil, insert ss-m24 x 3mm x 1.5d thinner for oil-based paints, wire type buffing whee bench grinder wheel -heavy grade, dial test indicator (dti) gauge with flexible stem magnetic base stand, digital clamp meter capacity: 600a ac trms heavy duty exhaust fan, size: 9 inch backward curved fan with motor size: 355, mm dia ventilation fan for electrical panel sweep, dia: 12 cm induction motor fan, blade shaft size: 20 mm & blade dia: 130 mm, induction motor fan blade shaft size: 25 mm, & blade dia: 110 mm gi 6 mm x 25 mm bolt & nut with washer, anchor bolt with nut & washer size: 10 mm anchor bolt with nut &, washer size: 8 mm anchor fastner size: 10, mm for threaded rod gi self tapping screw, size: 3/4 inch (20 mm) head type: truss, pop screw size: 1 inch (25 mm) head type: flat (csk). ss self tapping screw size: 2 inch (50 mm), head type: hex din rail size: 35 x 7.5 mm, add on auxiliary contact block (1 no +1 nc) casing and capping size: 20mm (3/4 inch), casing and capping size: 50mm (2 inch) copper strip for electrical motor size: 25 x 3 mm, current transformer (for mfm/ammeter), ratio: 10/5a current transformer (for mfm/ammeter), ratio: 15/5a, current transformer (for mfm/ammeter), ratio: 20/5a current transformer (for mfm/ammeter), ratio: 30/5a, current transformer (for mfm/ammeter), ratio: 5/5a emergency stop switch, metal enclosure electrical junction box, size: 200mmx200mmx150mm, metal enclosure electrical junction box size:, 300mmx300mmx200mm three pole neutral (4p), 32 amps miniature circuit breaker (mcb) 4-way mcb metal enclosure, 2- module surface mounted pvc box. thermal overload relay, range: 14-23 amps electronic fan regulator, single module porcelain heater insulators or terminal. blocks, led indicator color: amber pin type lug size: 1.5 sqmm, pin type lug size: 2.5 sqmm pin type lug size: 4 sqmm, pin type lug size: 6 sqmm spade type lug size: 1.5 sqmm, spade type lug size: 2.5 sqmm metal flexible conduit size:19, motor protection circuit breaker (mpcb) range: 6.3-10 amps (rotary) motor protection circuit breaker (mpcb) inst trip rating: 2.5 amps (rotary), motor protection circuit breaker (mpcb) inst trip rating: 25 amps (rotary) motor protection circuit breaker (mpcb) inst trip rating: 50 amps (rotary), ms conduit size: 25 mm motor terminal block range: 10 hp/7.5 kw, motor terminal block range: 40 hp/30 kw thermal overload relay(olr) range: 20-33 amps, thermal overload relay(olr) range: 42-69 amps plug top 3 pin capacity: 5 amps, 4 pole power contactor capacity: mnx 12 4 pole power contactor capacity: mnx 18, 4 pole power contactor capacity: mnx 9 push button (illuminated) color: green, push button (illuminated) color: red plugable interface relay (4 c/o, 230 vac) with base, plugable interface relay (4 c/o, 24 vac) with base analog timer controller for split ac's, terminal block range: 0.2-2.5 sqmm,

CTN :45408205

15 Jun, 2026 NA

Reasi - Jammu And Kashmir

Tender For corrigendum : supply of b2 punched tape concertina coil 1050mm dia 18 loops 3.5mm core wire and 8.2 kg weight including tolerance limit and all as per bid spec documents , a1 high security weld mesh panels all as per bid spec documents , a2 weld mesh panels all as per bid spec documents , supply of punched tape concertina coil 850mm dia 56 loops 3.5mm core wire and 20.5kg weight all as per bid spec documents , led street light wattage range 70w or 72w specification and make as per bid spec documents , omega clamp 89mm dia 35mm width 3mm thick , brace band 89mm dia 40mm width 4mm thick for fitting truss support , tie wire 1.4mm dia 100mm length as per bid spec documents , mushroom head bolt m8 x 25 sheet metal is 1730 , mushroom head bolt with breakable head safety nut m8 x 50 as per bid spec documents , mushroom head bolt with breakable head safety nut m8 x 120 as per bid spec documents , mushroom head bolt with breakable head safety nut m8 x 100 as per bid spec documents , fence post 89mm dia 3mm thickness 3.4 mtr length and 21.60 kg weight including tolerance and other spec all as per bid specific documents , truss support post with rail and cap 76mm dia 1800mm length weight 9.65 kg including tolerance and other spec all as per bid specific documents , truss support post with rail and cap 76mm dia 3100mm length weight 16.6 kg including tolerance and other spec all as per bid specific documents , intermediate y arm for supporting top ptcc all as per bid specific documents , b1 weld mesh panel dimension, mesh wire, panel size, coating, colour, wire tensile strength, weld tensile strength all as per bid specific documents , b3 fence post 76mm dia 3mm thickness 2.8 mtr length and 15.02 kg weight including tolerance and other spec all as per bid specific documents , punched tape concertina coil with 50 turns and 1050mm dia and all other spec as per bid specific documents , supply of punched tape concertina coil 850 mm dia 18 loops 3.5 mm core wire and all other spec as per bid specific documents , straining y-arm for supporting top ptcc and all other spec as per bid specific documents , razor running tape , ptcc rod 8 x 2640mm coationg hot dip galvanised to minimum 350 gsm , post head cap for b post , junction box rectangular all as per bid spec documents , mcb from 6amp to 32 amp capacity all as per bid spec documents , 25 sqmm 3.5 or 4 core pvc insulated sheathed armoured aluminium cable all as per bid spec documents , 25 sqmm 2 or 3 core pvc insulated sheathed armoured aluminium cable all as per bid spec documents

corporations/Associations/Others

CTN :45467249

18 Jun, 2026 4.96 Lacs

Bulandshahr - Uttar Pradesh

Tender For supply of tree prunner , axe , power operated grinding cum wire cutter , battery operated cutter , concreate cutting machine , 3 by 4 manila rope 20 m long , 1 by 2 manila rope 20 m long , 1 inch manila rope 20 m long , 1 by 2 inches manila rope 2 m long , tirfor 3 ton or 5 ton , tirfor one point six ton , tirfor zeor point seven five ton , pull lift three ton , pull lift one point six ton , pull lift zeor point seven five ton , along clamp contact wire , catenary wire come along clamp , feeder wire cum along clamp , aew wire come along clamp , large span come along clamp , frp type discharge rod , rail jumpers , steel sling 01 mtr , polyster webbing sling 01 mtr , steel sling 02 mtr , polyster webbing sling 02 mtr , steel sling 03 m , steel sling 04 m , steel sling 10 m , 1 inch d shackles , 3by4 inch d shakels , 1by2 inch d shackles , steel pulley 6 inch , steel pully three and half inch , search lights 10 w , halogen fittings 500 w , halogen bulb 500 w spare , extension board with cable of 20 mtr 10sq mm , portable generator 2 or 3 kva , led torch light , sludge hammer , wire claws panja , gl wire 8 swg , crow bar , shovels , safety belts , helmets , rubber gloves , banner flags , hand signal flags red and green , stretcher , thermometers , contact wire splicing jig , bull dog clamps , contact wire kink removers , contact wire twister cum bender , de spanner size 6 by 7 to 30 by 32mm , ring panner size 6 by 7 to 30 by 32mm , secrew driver 18 inch , secrew driver 16 inch , screw driver 12 , secrew driver 8 inch , secrew driver 6 inch , insulated cutting pliers 8 inch , insulated nose pliers 8 inch , adjustable pipe wrench 12 inch , adjustable spanner 12 inch , adjustable spanner 8 inch , adjustable spanner 6 inch , set of screw drivers , allen key size 2 to 10mm , grease gun , bond lever

Central Government/Public Sector

CTN :45422700

29 Jun, 2026 NA

Kapurthala - Punjab

Tender For supply and installation of interior furnishing of one rake set of namo bharat rapid rail (16 car formation) including nose cone and driver cab interior panelling and fitting as per specification icf/md/spec-418, issue status-01, rev-01.amd.01 & 2 and rcf annexure rcf_namo bharat rapid rail. note: safety clause must be followed according to annexure-a of dy.cple-ii l.no.rcf/emp/1 dated. 01.04.2025, as per drawing: icf/md/spec-418 rev. 01 with amendment 1 & 2 and rcf annexure rcf_ namo bharat rapid rail. [ warranty period: 30 months after the date of delivery ] ]

Ventilated Animal Caging System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector