Latest ventilator shutter Tenders | Government ventilator shutter Tenders

State Government

CTN :45721001

08 Jul, 2026 4.75 Lacs

Jaipur - Rajasthan

Tender For supply of ceiling materials and other works at lok bhawan jaipur - providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basic item.)with float glass panes of 8 mm thickness, providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled and glazed shutter 25 mm to 40 mm thick : is 710- 1976 marked 12mm thick teak ply bwr both side, providing & fixing door, window, chowkhats and other frames, including antitermite treatment, m.s. flat, hold fasts of size 250 x 40 x 3mm fixed with m.s. bolt 5mm dia 50mm long duly embedded in cement concrete m-15 grade : ivory coast wood grade i, providing and fixing double action hydraulic floor spring of approved brand and manufacture is : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece m.s. with brass cover plate

State Government

CTN :45699630

08 Jul, 2026 4.75 Lacs

Jaipur - Rajasthan

Tender For supply of ceiling materials and other works at lok bhawan, jaipur. - providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with pvs / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(cost of aluminium snap beading shall be paid in basic item.)with float glass panes of 8 mm thickness , providing and fixing wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled and glazed shutter 25 mm to 40 mm thick is 710-1976 marked 12mm thick teak ply bwr both side , providing & fixing door, window, chowkhats and other frames, including antitermite treatment, m.s. flat, hold fasts of size 250 x 40 x 3mm fixed with m.s. bolt 5mm dia 50mm long duly embedded in cement concrete m-15 grade: ivory coast wood grade i , providing and fixing double action hydraulic floor spring of approved brand and manufacture is: 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with ibrass pivot and single piece m.s. with brass cover plate , supply of wool jute kilim rugs blend natured fibers with timeless hand-weaving traditions crafted by skilled artisans, each rug carries earthy charm & durability. hand woven from rich wool and strong juke, these killim rugs bring texture, strength and artistic character to any space. every piece is made slowly and thickness 5 to 6 mm. size:-8'x10' size:-2'x24' size:-2'x20'

State Government

CTN :45661343

03 Jul, 2026 75.37 Lacs

Ambala - Haryana

Tender For providing and fixing of pool equipment accessories in swimming pool at sport complex sector-10, ambala city. “providing and fixing of pool racing lane and pool standard podium and other equipment accessories etc. complete in all respect and all other works contingent thereto.” (including three-year defect liability /mtc. free of cost. ) - [1.pm057] pm057. hire charges for jcb with bucket capacity more than 0.75 cum with fuel and driver [rate], [10.2]supplying and filling in plinth with sand (conforming to zone-iv, is 1542) under floors, including watering, ramming, consolidating and dressing complete. [through rate], [10.50.1]providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer-in-charge. 1. polished granite stone slab jet black, cherry red, elite brown, cat eye or equivalent. [through rate], [11.13.2]cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 2. 20 mm cement plaster [through rate], [11.52]cement rendering on plaster 1 mm thick [through rate], [12.134.4]providing and fixing factory made upvc white colour sliding glazed window up to 1.50 m in height dimension comprising of upvc multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape and size according to upvc profile), appropriate dimension of upvc extruded glazing beads and upvc extruded interlocks, epdm gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), g.i fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware`s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing and direction of engineer-in-charge. (single / double glass panes, wire mesh and silicon sealant shall be paid separately). variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. 4. three track three panels sliding window with fly proof s.s wire mesh (two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (area of window above 1.75 sqm). [through rate], [12.171]providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately). [through rate], [12.177.1]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 1. with toughened glass panes of 6 mm thickness (weight not less than 15 kg/sqm) [through rate], [13.41]providing and fixing stainl

State Government

CTN :45642759

08 Jul, 2026 50.32 Lacs

Kota - Rajasthan

Tender For tender for providing and laying in position cement concrete , kota stone 25 mm thick , kota stone slabs 20 mm thick in risers of steps, skirting , providing and applying white cement based putty of average thickness 1 mm , removing dry or oil bound distemper , distempering with 1st quality acrylic distemper , dismantling steel work in built up sections , demolishing brick work , dismantling stone slab flooring laid in cement mortar , demolishing cement concrete manually , providing and fixing 18 mm thick gang saw cut, mirror polished , 12 mm cement plaster , 15 mm cement plaster , providing and fixing fly proof stainless steel grade 304 wire gauge , providing and fixing glazing in aluminium door, window, ventilator shutters , providing and fixing double scaffolding system , painting with synthetic enamel paint of approved brand and manufacture , providing and fixing toughend glass partition 12mm clear glass , providing and fixing roller blind , dismantling washed stone grit plaster , providing and placing in position of pine workbenches , providing and placing in position desktop table , providing and placing in position esd workstation , providing and placing in position storage unit , providing and placing in position bag storage rack , providing and placing in position project display rack , tender for esd stools , wiring for light point , wiring for circuit , supplying and fixing modular socket outlet and switch connections , supplying and fixing a module switch , supplying and fixing modular socket outlet , tender for pvc insulated xlpe aluminium conductor armourd cable , laying of one number pvc insulated and pvc sheathed , supplying and making end termination , pipe earth electrode , providing and fixing g.i. strip , emergency light illuminated signages illuminated signages , providing and fixing 6 swg dia g.i. wire on surface or in recess , tender for ul listed cpri tested , installation of 4 mtr long with help of bocky 17.0 mm , supplying and fixing 16 way, double door , supplying and fixing of 12 way double door , providing and fixing 100 a, 16 ka,tpmccb , supplying and fixing 5 a to 32 a rating single pole , supplying and fixing 5 a to 32 a rating double pole pole , supplying and fixing 5 a to 32 a rating triple pole , supplying and fixing suitable size gi box 3 pin 5 a , supplying and fixing dp sheet steel enclosure on surface , supplying and fixing tp sheet steel enclosure on surface , sitc 100watt ip 66 green perform prime is a efficiacy of 160 lmw , revolving chair (v5) (q2) , executive table (v4) (q2) , modular table / meeting table / centre table (v2) (q2) //bid details 2 / 54

State Government

CTN :45607137

23 Jun, 2026 1.98 Lacs

Rohtak - Haryana

Tender For - a/mtc of water treatment plant sector-34, u/e, rohtak, `providing and fixing of 10mm thick pvc (poly vinyl chloride) panel, glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber /neoprene gasket etc. complete in the o/o sde-ii, hsvp, rohtak and all other works contingent thereto`. a/c rs. 1.99 lacs em rs. 3980/- time limit : - 01 month

State Government

CTN :45425137

29 Jun, 2026 6.86 Lacs

Jaipur - Rajasthan

Tender For corrigendum : supply of miscellaneous tp hardware and consumable fitting/fixtures etc. for corrective maintenance to jmrc- non bsr items, aerolite 450gm (epoxy rash and hardner adhesive make, aralditel aerolibelloctite bondthe), anchor fastener (10 mm), anchor fastener (6 mm), angle valve/brass dish angle valve stainless steel fish, arabite tube (180 gms) ( rasin and hardner adhesive make, arabitel aeroliteloctite bondthe), bend nose pillers, big disc brass spindle 3/4", black screw 1 inch (500 pcs.), black screw 1.5 inches (500 pcs), professional rotary hammer drill machine (make:bosch gbh 2-26 re or equivalenti, brass spindle with rubber washer (04 no.), claw hammer, cp napple (1 inch), cp nipple (1.5 inch), cp nipple (2 inch), cpvc ball valves 3/4 inches, cpvc socket 314 inches, cpvc solvent (20 gm each), curtain pipe (wall and hanging support holder, cylinder 60mm godrej dorset, cylinder 70mm godrej dorset, danfoss solenoid valve coll, door doser gliding bar type, door stopper, doorset/podrej europrofile cylinder lock)(80 mm), double side tape, dr. fixft waterproofing super latex compound (1kg), electric extension board (10 mtr wire, 3 sockets), electrical tape (steelgro, 30pcs), fevlquick (20 gms) (grade 203), feviquick (20 gms) (grade 463), float switch, gaskit for windows/epdm rubber deal for windows, gil end plug (0.5 inch), glass fibre measuring tap 30 mtr. length, hammer ll bit (10 mm), hammer dirfll bit (12 mm), hammer drill bit 6mm, hammer drill bit 8mm, hasp staple (latch) (100 mm), hasp staple (latch)(80 mm), heavy duty stainless steel lock for glass door thickness 10 mm to 12 mm, hex head bell-drilling roof screws with rubber sealing washer 12x65mm (200 pcs.), holdtite (50 grm each), hydraulic door closer (131 mark), key hive locks (drawer lock), l patti (2 inch), metal disc cutter blade (04 inch), mortise lock 70mm complete, m-deal 90/100gm, nose pier, padlock, pipe wrench 18", pu dotted hand gloves (make udyog or equivalent), pvc green carpert mat 12mm thick 1200mm * 750m =, pvc safety gloves size large, pvic solvent (100 gm each), retro reflective tape 3m make (50 mr.), ro op nipple, round casting clip (100 pcs.), screw bit, screw driver, screw extractor set, self taping (hexahead) (02 inch) (100 pcs.), self tapping screw (6-8mm top dila) 13 mm, belt tapping screw (6-8mm top dia) 19 mm, delf tapping screw (6-8mm top dia) 25 mm, self tapping screw (6-8mm top dia) 38 mm, self tapping screw (6-8mm top dia) 50 mm, self tapping screw (6-8mm top dia) 75 mm, top dia) 6.35 mpm belf-tappling screw (6-8mm, bilding/telescopic ladder, small clisc brass spindle sqrt(2), stainless steel frameless clamp (both side screw arrangement) , steel measuring tap 5 mtr. length, stone cutter disc (04 inch), talon tape, thinner, todi bag, tower bolt (6 inch), transparent extra strong virgin mlcl sheet film tirpal (120 to 1:50 gdmx50x 30 feet), universal pvc cistern handle with rod, wall plug/bcrew git 38mm, wall plug/bcrew git (32 mm), wall plug/screw git (50mm), wall plug/screw git (70mm), waste pipe, water meter 1" (rahul make), water meter 2" (rahul make), wd-40 (400420m), zoloto 32 mm forged brass ball valve 10088 of 10 marked

State Government

CTN :45425974

29 Jun, 2026 6.86 Lacs

Jaipur - Rajasthan

Tender For corrigendum : supply of miscellaneous t and p hardware and consumable fitting fixtures etc. for corrective maintenance to jmrc - non bsr items, aerolite 450gm (epoxy rasin and hardner adhesive make araldite/aerolite/loctite/bondtite), anchor fastener (10 mm), anchor fastener (6 mm), angle valve / brass dish angle valve stainless steel finish, araldite tube (180 gms) (epoxy rasin and hardner adhesive make araldite/aerolite/loctite/bondtite), bend nose pliers, big disc brass spindle 3/4", black screw 1 inch (500 pcs.), black screw 1.5 inches (500 pcs.), professional rotary hammer dril machine (make:bosch gbh 2-26 re or equivalent), brass spindle with rubber washer (04 no.), claw hammer, cp nipple (1 inch), cp nipple (1.5 inch), cp nipple (2 inch), cpvc ball valves 3/4 inches, cpvc socket 3/4 inches, cpvc solvent (20 grm each), curtain pipe (wall fix and hanging support) holder, cylinder 60mm godrej/dorset, cylinder 70mm godrej/dorset, danfoss solenoid valve coil, door closer sliding bar type, door stopper, doorset/godrej(europrofile cylinder lock)(80 mm), double side tape, dr. fixit waterproofing super latex compound (1 kg), electric extension board (10 mtr wire, 3 sockets), electrical tape (steelgrip, 30pcs), feviquick (20 gms) (grade 203), feviquick (20 gms) (grade 463), float switch, gaskit for windows / epdm rubber seal for windows, gi end plug (0.5 inch), glass fibre measuring tap 30 mtr. length, hammer drill bit (10 mm), hammer drill bit (12 mm), hammer drill bit 6mm, hammer drill bit 8mm, hasp staple (latch)(100 mm), hasp staple (latch)(80 mm), heavy duty stainless steel lock for glass door thickness 10 mm to 12 mm, hex head self-drilling roof screws with rubber sealing washer 12x65mm (200 pcs.), holdtite (50 grm each), hydraulic door closer (isi mark), key hive locks (drawer lock), l patti (2 inch), l patti (4 inch.), l patti (5 inch), metal disc cutter blade (04 inch), mortise lock 70mm complete, m-seal 90/100gm, nose plier, pad lock, pipe wrench 18", pu dotted hand gloves (make udyogi or equivalent), pvc green carpert mat 12mm thick 1200mm x 750mm, pvc safety gloves size large, pvc solvent (100 grm each), retro reflective tape 3m make (50 mtr.), ro cp nipple, round casing clip (100 pcs.), screw bit, screw driver, screw extractor set, self taping (hexa head)(02 inch) (100 pcs.), self tapping screw (6-8mm top dia) 13 mm, self tapping screw (6-8mm top dia) 19 mm, self tapping screw (6-8mm top dia) 25 mm, self tapping screw (6-8mm top dia) 38 mm, self tapping screw (6-8mm top dia) 50 mm, self tapping screw (6-8mm top dia) 75 mm, self-tapping screw (6-8mm top dia) 6.35 mm, silicon gun, silicon sealent (white/black/transparant ), sliding/telescopic ladder, small disc brass spindle 1/2", stainless steel frame less clamp (both side screw arrangement) (for ss railing glass support), steel measuring tap 5 mtr. length, stone cutter disc (04 inch), taflon tape, thinner, tool bag, tower bolt (6 inch), transparent extra strong virgin mlcl sheet film tirpal (120 to 150 gsm)(50x 30 feet), universal pvc cistern handle with rod, wall plug/screw gitti 38mm, wall plug/screw gitti (32 mm ), wall plug/screw gitti (50mm), wall plug/screw gitti (70mm ), waste pipe, water meter 1" (rahul make), water meter 2" (rahul make), wd-40 (400/420ml), zoloto 32 mm forged brass ball valve 1008b of isi marked

CTN :45404112

24 Jun, 2026 NA

Patiala - Punjab

Tender For replacement to damaged grill & ventilator shutters of bath & toilet in type-ii (503 nos.), iii(260 nos.) & iv qtrs in colony-ii plw patiala

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

Central Government/Public Sector

CTN :45291377

12 Jun, 2026 45.84 Lacs

Cuddapah - Andhra Pradesh

Tender For supply of earth work in excavation , filling available excavated earth excluding rock , demolishing rcc work , providing and laying in position cement concrete , providing and laying in position specified grade of reinforced cement concrete , supplying and filling in plinth with sand under floors , steel reinforcement for rcc work , centering and shuttering including strutting lif in foundations footings bases of columns , centering and shuttering including strutting lif columns pillars piers abutments posts and struts , dry stone pitching 22 point 5 cm thick , neat cement punning , demolishing brick work , brick work with non modular fly ash bricks , finishing walls with textured exterior paint , finishing walls with 100 percentage premium acrylic emulsion paint , 15 mm cement plaster , random rubble masonry with hard stone , structural steel work riveted bolted or welded in built up , surface dressing of the ground including removing vegetation , removing white or colour wash by scrapping , providing and fixing glass panes with putty and glazing clips in steel doors , providing and fixing glazing in aluminium door window ventilator shutters , providing and fixing aluminium work for doors windows ventilators , providing and fixing gi chain link fabric fencing , providing and fixing ist quality ceramic glazed wall floor tiles , grading roof for water proofing treatment with cement concrete , repair to plaster of thickness 12mm to 20 mm in patche , providing and laying water proofing treatment on roofs of slabs , 0 mm thick factory made polyvinyl chloride pvc door shutter , providing and fixing factory made panel pvc door shutter consisting of frame , providing and fixing on wall face unplasticised rigid pvc rain water pipes , providing mixing and applying sbr polymer , providing and injecting approved grout 2 percentage of weight of cement used modified cement slurry made with non shrink compound in concrete rcc work , providing and injecting approved grout cement slurry made with shrinkage compensating cement in concrete rcc work , providing and injecting approved grout epoxy injection grout in concrete rcc work of approved make , providing laying spreading and compacting graded stone aggregate

Ventilator Shutter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors