Latest vertical pump Tenders | Government vertical pump Tenders

corporations/Associations/Others

CTN :45488890

18 Jun, 2026 NA

Parganas - West Bengal

Tender For manufacturing, supply fitting fixing of c.i diffuser of 1670 lps capacity vertical pump unit no 2 at topsia point a drainage pumping station.

State Government

CTN :45401957

09 Jun, 2026 99.8 Thousand

Hisar - Haryana

Tender For annual maintenance of storm water drainage scheme in sector 14p-ii and 33p hisar (2026-27). `hiring of tractor burma (8-12 inch) vertical pump with diesel and operator including suction pump and other accessories for making of sewer diversion due to damaged of sewer line near stp at sector-14-p-ii, hisar and all other works contingent thereto a/c rs. 1.00 lacs

CTN :45224092

11 Jun, 2026 NA

Tiruvallur - Tamil Nadu

Tender For corrigendum : supply of c16m260037 - 1799960698 - vertical pump driven by diesel engine with right angled gear box

CTN :45446753

22 Jun, 2026 57.77 Lacs

Bhiwani - Haryana

Tender For supply erection commissioning of electrical and mechanical equipment for dewatering of flood water from field area for village badesra outfall at rd 70600 l of jui feeder - estimate for supply, erection & commissioning of electrical & mechanical equipment for dewatering of flood water from field area for village badesra outfall at rd 70600-l of jui feeder in lift w/s (m) division, bhiwani - supply, erection & commissioning of 5 c/s axial flow water lubricated vertical pumps of 5 cs. discharge at 1440 rpm at static head of approx 8.0 mtr. with y body, including ms bend including flange welding, nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department, supply, erection & commissioning of fully automatic star delta starter suitable for 30 hp motor as per ip 54 with all allied item like mccb, contactor, rating 120 amp 90 amp, 50 amp, all type of protection relays (over voltage, under voltage, over corrent, singhle phasing preventor, delay siwtch ) correction capacitor, digital meter, bus bar, thimble etc suitable and all live parts should be covered as per site demand and compartment coated with epoxy coating as per approved technical specification of department. (including cable suitable for panel to motor).

Central Government/Public Sector

CTN :45261450

11 Jun, 2026 NA

Ropar - Punjab

Tender For corrigendum : supply of bfw pump squirrel cage lt induction , pc-4 5 pump squirrel cage lt induction , abs tower new pump squirrel cage , leak acid feed water pump squirrel , storage oxidation pump squirrel cage , ml vertical pump squirrel cage lt , stitching machine squirrel cage lt , slat conveyor squirrel cage

corporations/Associations/Others

CTN :45401486

12 Jun, 2026 10.00 Lacs

Tirupathur - Tamil Nadu

Tender For maintenance work for building and supply and delivery of kitchen vessels and equipments in amma unavagam in palanisamiyar road - supply ,delivery & fixing of steam boiler ckr 36 outer shell dia. : 28 , inner shell dia. : 19 , outer shell ht. . : 36 . steam output. : 30 kgs/hrs. operated by gas outer shells are made of 6mm ms plate. inner shells are made of 304 grade 16swg ss sheet. inner bottom 10swg ss sheet. steam boiler is fitted with automatic float valve assembly, safety valve, pressure gauge meter, water level indicator, and drainage valve., supply ,delivery & fixing of steam iddly plant - cap 240 nos made of 304gde 16 swg ss sheet. this unit is divided with 04 chambers. this is mounted on ss stand . racks will be provided underneath to keep idly plates. idly boiled within 5 to 7 mts. heat resistancedoor with auto steam injection. each idly tray having 20 iddlies. total tray is 12 nos., supply and delivery of chest freezzer-double ef 450 double door chest freezer fibres body cap 450 ltrs , temp 8 degree to -25degree, supply and delivery of idly cooking unit, ss vessels, plastic materials, mixie, tilting grinder, and other equipments supply & delivery of ss meals plate 11 dia, supply & delivery of ss water jug, supply & delivery of steam pipe line accessories 3/4 gi pipe & ms fittings, supply and delivery of gas pipe line:. manifold 4 + 4 point., supply and delivery of ss plate collecting trolley size : 600x500x750mm., supply and delivery of rice grinder - 50 kgs with 3 hp motor and auutomatic washing shower., aluminium vessel 25 kg capacity, aluminium vessel 10 kg capacity, aluminium bucket (25l-15kg), mixie with 3 jar, pressure cooker 20 l, ss rice karandy, ss sambar karandy, ss water drum 50 lit capacity, aluminium kadai-5 kg capacity, supply and fixing of water co2 stored pressure type 9 litres capacity fire extinguisher as per new is 15683 complete with control valve, gun metal cap, pressure gauge, operation sticker, discharge hose, wall mounting bracket, safety clip, etc., as directed by the departmental officers., supplying and erecting in position of following 250 liters capacity industrial model reverse osmosis water-cum purifier to deliver potable water with world health organisation (who) standards with following accessories. (a) ms skid - 1 no. (b) media 11054 no. vessel with 20 nb multiport valve (with media pubble and fine sand and activated carbon filling) set (c) feed pump 0.50 hp 1 no. (d) vertical pump 2-9, 2.00 hp / single phase 1 no.(e) membrane 40 x 40 filmtech (or) equilaents / osmonic (usa) - 1 no. and membrane pressure vessel 40 x 40 -1 no. & pressure gauge - 2 nos. (f) flow meter - 1 no. 20 filter with housing - 1 no.,low pressure switch - 1 no., level switch - 1 no. & necessary cpvc pipes and fittings. the system shall be provide with two panel control system with necessary stainless valves and fittings and float control etc. the rate should be inclusive of all civil works, wherever necessary to install the system in position and intact, supply and fixing of 300mm (12") sweep (light duty) ac exhaust fan complete without provision of hole in the wall, supplying, fabricating, erecting and fixing hilux (or) equivalent board false ceiling upto a ceiling height of 4.5m from floor level., supply and fixing of single box type 436 w flu fitting complete with electronic ballast with tw round blocks on wall or ceiling with flu tube with pvc unsheathed copper leads from terminals to the fitting., supply and fixing of 1200mm sweep ac ceiling fan with stepped electronic 300w regulator with the existing down rod on the existing clamp, supply and fixing of 300mm sweep wall mounted fan with stepped electronic 300w regulator with the existing down rod on the existing clamp, supply and fixing of wt bulk head fitting suitable with guard and 15 w (100w) led bulb, wiring with 2 x 1.5 sq.mm. (22 / 0.3) pvc insulated single core unsheathed copper conductor of 1100v grade in suitable pvc

CTN :45365473

13 Jun, 2026 NA

Tuticorin - Tamil Nadu

Tender For purchase of lab equipments for ice dept - purchase of lab equipments for ice dept, i/p and p/i converter (iemcode:g002) i/p converter:(4 20) ma to (3 15) psi conversion. p/i converter:(3 15) psi to (4 20) ma conversion. air filter regulator (afr):20 psi regulated air supply. built-in current source. 3 digit led display for process indication. power supply: 230 v ac, 50 hz. mounting:bench-top / panel-mounted trainer configuration., level measurement using float and sight glass indicator- itemcode: g005specifications: sight glass level indicator. float type level indicator. power supply:230 v ac, 50 hz. monoblock pump:0.5 hp / 1 hp. sump tank., 8051develop ment board with usb/rs 232 cable to connect with computer (item code: g008)specifications: communication interface:usb / rs-232. on-board facilities:8 output leds,8 input switches,ldr,reed switch,8-bit adc,8-bit dac. display interfaces:seven-segment display,16 2 lcd interface. motor interfacing:stepper motor with driver,dc motor with h-bridge driver, 8 bit adc/dac interface board (item code: g009)specifications: thermistor / lm35 input in one channel. variable input (0 5) v in another channel. 8 leds for digital output indication.. necessary control signals provided for adc0809. 8-bit dac using dac0808. 8-bit digital input from controller. single-channel dac output:(0 10) v. power supply: 12 v or 15 v for analog circuitry, water level measurement trainer kit using capacitive type transducer (item code: g020) tabletop model with transparent acrylic tank of approximately 50 cm height. capacitive type level sensor for continuous level measurement. sensor output: (4 20) ma and/or (0 5) v with built-in signal conditioning. vertical pump for water circulation from sump to tank. flow control valve, overflow, and drainage arrangement. digital display for water level indication in cm. power supply: 230 v ac, 50 hz, single phase. in-built regulated dc power supply for sensor and control circuit. mounted on powder-coated ms frame for laboratory use. suitable for calibration and study of capacitive level measurement., flow measurement using electromagn etic flow meter(item code: g021)specifications: medium: water (salt water / bore well water). electromagnetic flow measurement: instantaneous flow rate and totalized flow indication. electromagnetic flow meter: integral mounted type. power supply: 90 260 v ac, 50 hz. minimum media conductivity: 15 s/cm. flow rate unit: m /hr. operating pressure: up to 10 kg/cm . electrode material: ss-304 / ss-316 / ss 316l. lining material: ptfe / neoprene / hard rubber / pfa. line size: 15 nb 25 nb. flow range: 0.1 10 m /hr. connection type: flanged. display: digital indication for flow rate and totalized flow. water pump: submersible type, 230 v ac, 50 hz. water tank: approximately 20 25 liters capacity. flow control valve provided. drain valve and overflow arrangement provided. mounted on powder-coated ms frame suitable for laboratory use.

corporations/Associations/Others

CTN :45343694

12 Jun, 2026 5.00 Lacs

Tiruvettipuram - Tamil Nadu

Tender For supply and delivery of kitchen equipments in amma unavagam at kamaraj nagar in thiruvathipuram municipality. - supply and delivery of milk boiling vessel the inner vessel is fabricated by 304 grade 2mm thickness stainlesssteel sheet the inner bottom dished porition is kept at a distance of 100m bottomplate for the effective functioning outer vessel bottom is made of 1.6mm thick and the vessel sides are supported by 65 mm dia stainsteel rod with steam inlet connection size 16" dia x 16"h (50 lts), supply and delivery of idly plant -240 nos direct steam double jacketed, capacity 240 idles / batch (4 chamber) moc : ss 304 grade, vessel thickness 1.2mm, steam entry : individual entry for each module, module door : with packing of glass wool in between the chambers of the door (double jacketed), self locking when steam in on, seating : food grade rubber beading (removable), trays / module : 3 trays, total trays 12 nos, idles / tray 20 idles, stand 1 ss square tube, 1.5 mm thickness 304 grade,(size: 25"l x 21"b x36"h), extra idly trays, idly ss stand, supply and delivery of ss hot bain marie size : 24 l x 14 b x 11 h (2 holes), made out of 1.25 mm ss 304 grade sheet, consists of 2 containers, each container 10 litres capacity, mounted on 1 od 16 g swg ss 304 pipe legs with adjustable nylon boot.(keep sambar hot ever), supply and delivery of single burner cooking range size : 24 l x 24 b x 18 h, top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four sides, pan support : 1 no cast iron grid, burner : 1 no, t 35 high pressure burner lpg with fittings, ncv : 1 no, legs : 1 16 g ss 304 grade pipe legs with adjustable nylon bullet legs.(for cooking purpose), supply and delivery of ss work table for idly size : 900 x600x850mm, made out of 16 g swg ss 304 grade sheet, legs made of 1 od 16 swg ss 304 grade pipe with adjustable nylon boots, supply and delivery of double burner cooking range size : 48 x27 x16 , top : 304 grade 16 g ss sheet, frame : 32x32x6mm ms angle, covering : 20 gauge ss 304 grade sheet four side, pan support : 2 nos cast iron grid, burner : 2 nos, t 35 high pressure burner lpg with fittings, ncv : 2 nos, legs : 1 16 g ss 304 grade pipe legs with adjustable nylon bullet legs., supply and delivery of idly cooking unit, ss vessels, plastic materials, mixie, tilting grinder, pulvariser grinder and other equipments aluminum dabara, 25 kgs capacity heavy grade, aluminum dabara, 10 kgs capacity heavy grade, aluminum bucket, 25 litres capacity, aluminum rice filter, 25 kgs capacity, ss idly collection tray, ss rice karandi, big size, ss sambar karandi, big size, ss water drum 50 litres capacity, ss water jug, ss oil can, 5 litres capacity, ss plates, round, 3 compartments, ss tumblers, with curved edges, 300 ml capacity, ss spoon for eating, ss bony, ss muram, big size, ss filter karandi, ss knife, ss rice & sambar /curd mixed vessels, ss rice & sambar / curd mixed karandy, ms kadai, 24 dia, pressure cooker 22 litres capacity, isi make, 320 litres capacity refrigerator, plastic tray, plastic pot, plastic mug, plastic drum, 50 litres, plastic container (10 litres, plastic muram, plastic stool medium, cloth mat, idly plate cloth, brooms, hot box, electronic weighing scale 30 kgs capacity, mixer heavy duty 1 hp, 3 jar, tilting grinder 15 litres capacity, idly making vessel, pesto flex (big), ss jarnee 5 feet length, aluminium dubara lid 25 kgs, aluminium dubara lid 10 kgs, ss rice karandi, medium size, ss rice karandi, ss volley 10 lit capacity, ss lid 10 kgs capacity, supplying and erecting in position of following literscapacity industrial model reverse osmosis water-cum-purifier to deliver potable water with world healthorganisation (who) standards with following accessories.(a) ms skid - 1 no.(b) media 11054 no. vessel with 20 nb multiport valve(with media pubble and fine sand and activated carbonfilling) set(c) feed pump 0.50 hp 1 no.(d) vertical pump 2-9, 2.00 hp / single

CTN :45308999

30 May, 2026 NA

Panipat - Haryana

Tender For supply of flow more make pump spares - vertical pump details: (all spare parts price list discount required)tag no.- mcp001sr.no. 20024510-30-01head- 35 mtrdischarge flow 825m3/hrpower-91.77 kwrpm-1488, size-18 m, stage-1application- mcw pump, make- flowmore, vertical pump details: (all spare parts price list discount required)tag no.- acp001sr.no. 20024510-40-01head- 55 mtrdischarge flow 300m3/hrpower-53.07 kwrpm-1486, size-14 m, stage-3application- acw pump, make- flowmore, vertical pump details: (all spare parts price list discount required)sr.no. 20024510-60-01head- 30 mtrdischarge flow 85 m3/hrpower-8.45 kwrpm-1465, size-10 m, stage-3application- acw pump, make- flowmore, pump details: (all spare parts price list discount required)type- h-e-sfig- 5624sr.no. 20024510-50-03head- 75 mtrdischarge flow 50m3/hrpower-30kwrpm-2955application- dm water transfer pump, make- flowmore , pump details: (all spare parts price list discount required)type- h-s-cifwtp 802sr.no. 200245-10-20-01head- 80 mtrdischarge flow 95m3/hrpower-45kwrpm-1475application- feed transfer pump, make- flowmore, pump details: (complete bare pump)type- h-s-cifwtp 802sr.no. 200245-10-20-01head- 80 mtrdischarge flow 95m3/hrpower-45kwrpm-1475application- feed transfer pump, make- flowmore, pump details: (all spare parts price list discount required)tag no. 1swtp001model/size m590 65x 50pump type- multistagefluid temp- 110/1200cflow- 23m3/hrspeed- 2900 rpmpower- 45 kwapplication- de-superheating, make- flowmore

CTN :45326580

09 Jun, 2026 NA

Madurai - Tamil Nadu

Tender For purchase of instrumentation and control engineering practices (equipment) - motorized control valve trainer kit signal input:4 20 ma or 0 5 v valve characteristic:equal percentage stem movement:maximum 10 mm or 12 mm body material:cast iron trim material:ss 316 trim size: cv value:2 or 5 actuator:servo motor supply voltage:230 v ac, 50 hz connection: flanged or screwed type. digital indicator provided potentiometer provided for varying the 4 20 ma input signal, saybolt viscometer apparatus glass type: high-quality borosilicate glass tube. control type: manual energy regulator control. shape: rectangular bath with cylindrical test chamber. temperature range: ambient to 240 c oil bath temperature. humidity: up to 80% rh (non-condensing). power supply: 230 v ac, 50 hz. measuring range: 32 to 1000 sus(saybolt universal seconds). accuracy: as per astm d-88( 0.2 seconds). mounting type:benchtop. capacity:one cup(approximately 60 ml). control mode:manual operation. port size:standard orifice sizeas per astm d-88. features:oil bath with heater,thermoregulator,insulated outer body,orifice,receiver flask, control valve trainer kit three pneumatic control valves provided with individual hand valves valve characteristics: i) quick opening ii) linear iii) equal percentage. valves connected in parallel configuration for comparative study. pneumatic operation with air supply connection. control valve assembly mounted on trainer panel. power supply: 230 v ac, 50 hz., water level measurement trainer kit using capacitive type transducer tabletop model with transparent acrylic tank of approximately 50 cm height. capacitive type level sensor for continuous level measurement. sensor output: (4 20)ma and/or (0 5)v with built-in signal conditioning. vertical pump for water circulation from sump to tank. flow control valve, overflow, and drainage arrangement. digital display for water level indication in cm. power supply: 230 v ac, 50 hz, single phase. in-built regulated dc power supply for sensor and control circuit. mounted on powder-coated ms frame for laboratory use. suitable for calibration and study of capacitive level measurement.

Vertical Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

State Government

Central Government/Public Sector

corporations/Associations/Others

corporations/Associations/Others