Latest vibrating roller sale Tenders | Government vibrating roller sale Tenders

Central Government And Public Sector

CTN :45154697

16 Jun, 2026 NA

Bangalore - Karnataka

Tender For heavy duty chain connecting link for 1 1/4" pitch # 100-h-1asa roller chain (cotter pin type) for special cranes & pc line cdlr conveyor,make:t.i.diamond/renold-xd.note:1)supply shall accompany the original manufacturers test certificate.2)only oem or their authorized dealer shall participate in the tender.3)dealers shall produce valid authorized dealer certificate. ]

Central Government And Public Sector

CTN :45227359

29 May, 2026 NA

Bangalore - Karnataka

Tender For "roller chain 1 1/2" pitch # 120-h-asa. additional two chain connecting links and one offset connecting links for every 6 meters of chain length to be supplied. make: ti diamond/renold-xd. note: 1) supply shall accompany the original manufacturers test certificate. 2) only oem or their authorized dealer shall participate in the tender.3) dealers shall produce valid authorised dealer certificate. ]

CTN :45253316

30 May, 2026 NA

Haldwani - Uttarakhand

Tender For supply of manual pitch roller (q3)

State Government

CTN :45225076

26 May, 2026 NA

Amroha - Uttar Pradesh

Tender For providing of operation and maintenance of switchyard - repairing of damaged operating mechanism of 220 kv line isolator earth switch of amroha-moradabad bay at 220 kv substation amroha by safe dismantling of operating mechanism gear box & welding work on earth switch rod, including rethreading replacing of worn gear by remetaling job 01 and rethreading with same pitch gauge also replacing of roller assembly attachment retightening and realignment, in emerging and all other associated wok required for proper completion of work with all proper material and t&p.

Central Government And Public Sector

CTN :45210672

25 May, 2026 NA

Bengaluru - Karnataka

Tender For supply of set of duplex roller chain, 1" pitch, consisting of the following items: a) duplex roller chain, 1" pitch, size 80-2 (asa standard), qty: 20 metres. b) offset (half) link for duplex roller chain, 1" pitch, size 80-2 (asa standard), qty: 10 nos. c) connecting link for duplex roller chain, 1" pitch, size 80-2 (asa standard), qty: 10 nos, along with material test certificate (mtc). make: make:t.i diamond / renold-xd / rolon. [ warranty period: 30 months after the date of delivery ] ]

CTN :45196066

29 May, 2026 NA

Samastipur - Bihar

Tender For supply of cricket pitch roller 1000 kgs , cricket pitch roller 3000 kgs , grass cutter 1.5 hp , grass cutter 4.3 hp

Central Government/Public Sector

CTN :44856659

23 May, 2026 NA

Duliajan - Assam

Tender For corrigendum : supply of chain, 2" pitch, double strand, cottered , chain 2" pitch , chain roller, 2.1/2" pitch, triple strand

Co-operative

CTN :45096137

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.s. item on conversion and supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. no. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg. kcp-mh-70 and texmaco mh-32supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b as per drg. kcp-mh-13-ii and texmaco mh-13-isupply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate, as per drg., c.s.trash beam as per is-1030/is 2708 as per drg. kcp-mh-84-r and texmaco mh-36supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per drg no mh-17-b for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-31for top roller housingsupply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79 for bottom roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, as per drg. blr-73/1, c.s.sprocket/gear for bagasse elevator (pilot bore) pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm, boss- 270x130 mm, as per drg. mh-75, cs sprocket (pilot bore) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm, od 258.8mm, for bagasse elevator drive, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for inter carrier, as per drg. mh-72, teeth 12, od-302mm, pcd- 290mm, rd-242 mm, pitch-75mm, b1 100mm, b2 75mm, s.s. wear plate is 304 quality, as per drg. mh-60(i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg. mh-90 (texmaco), c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg. cu-26-ii, pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg. mh-200716, clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete as per drg. mh-39-r, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-210 mm, pcd-198 mm, pitch- 20 mm, module-6 as per drg. no. cu-16-r, pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, as per drg. blr 32/93, od- 646mm, pcd-573mm, rd-497mm, nos of teeth 12, pitch-150.00mm, chain sprocket for int

CTN :45105964

21 May, 2026 NA

Bazpur - Uttarakhand

Tender For supply of tools and tackles materials in sugar mill - roller grooving tool size- x 6 x 40 isi/iso standard, size- x 6 x 45 isi/iso standard, size- x 6 x 50 isi/iso standard, size- 1 x 12 x 40 isi/iso standard, size- 1 x 12 x 45 isi/iso standard, size- 1 x 12 x 50 isi/iso standard, size- 1, x 12 x 40 isi/iso standard, size- 1, x 12 x 45 isi/iso standard, size- 1, x 12 x 50 isi/iso standard, carbide cutting tools. size: x 4 right hand. isi/iso standard, size: x 4 left hand. isi/iso standard, size- 1 x 6 right hand. isi/iso standard, size- 1 x 6 left hand. isi/iso standard, size- x 6 right hand isi/iso standard, size- x 6 left hand isi/iso standard, carbide tips all size isi/iso standard, h.s.s. tool bit all size isi/iso standard, tapper shank dril all size . isi/iso standard, straight shank dril all size. isi/iso standard, files all size. isi/iso standard, tape set of (3 piece) bsw all size. isi/iso standard, tap set of (3 piece) mm. all size. isi/iso standard, die nut inch/mm all size. isi/iso standard, d. spanner set all size. isi/iso standard, ring spanner set all size. isi/iso standard, box spanner set all size. isi/iso standard, pipe rinch all size. isi/iso standard, measuring tape 3 meter long . isi/iso standard, do - 5 meter long. isi/iso standard, do - 15 meter long. isi/iso standard, tin cutter 10 . isi/iso standard, do - 16 isi/iso standard, revolving centre 3 m.t. isi/iso standard, revolving centre 4 m.t. isi/iso standard, revolving centre 5 m.t. isi/iso standard, oil can capacity 200 m.l. isi/iso standard, screw pitch gauge. isi/iso standard, wooden saw(circular saw)1/8 x 18 isi/iso standard, drill socket (i) size 0 1 isi/iso standard, (ii) size- 1 2 isi/iso standard, (iii) size- 2 3 isi/iso standard, (iv) size- 3 4 isi/iso standard, (v) size- 4 5 isi/iso standard, h.s.s. black tool bar square high grade all size, steel rule 12 . isi/iso standard, steel rule 24 . isi/iso standard, screw driver set all types and sizes. isi/iso standard, pliar all type and sizes. isi/iso standard, drill chuck straight size: 1/8 to isi/iso standard, carbide tips only (all size) isi/iso standard, high carbon steel tool 10% cobalt size: to 1 isi/iso standard, knurling tool multi purpose. isi/iso standard, carbide tip tool (with handle) k-20 for (roller grooving) (i) size- 1, x 12 x 40 isi/iso standard, (ii) size- 1, x 12 x 45 isi/iso standard, (iii) size- 1, x 12 x 50 isi/iso standard

Central Government And Public Sector

CTN :45100158

27 May, 2026 NA

Damanjodi - Odisha

Tender For supply of 1.25" px17 teeth sprocket, drg. 2415-a49-01_ 1000073293_ 1_ 12902115540 , 1.25" px54 p roller chain+ connectg. linely_ 1000073293_ 2_ 12902115780 , 118" duplex roller chain 1.3/4" pitch x* _ 1000073293_ 3_ 88901031020

Vibrating Roller Sale Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government And Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector

Co-operative

Central Government And Public Sector