Tender For supply of transformer oil testing kit (bdv) 1 kva/0-100 kv range motorized cum manual type (digital) for measuring break down voltage /dielectric strength of insulating oil used in transformer/other switchgears with complete accessories( test equipment, oil test vessel with mushroom electrode assembly, 2.5 mm go-no-go gauge, main ac cable of suitable length. user manual with test and warranty certificates) .technical specification as : input power ac 220-250 v/50 hz, output: 0-100 kv ac, trip current: max10-20 ma, operating temp: 10 to 50 degree centigrade humidity:<75% non considering, o/p voltage resolution: 0.1 kv, accuracy: +2% with digital display.
Tender For providing of custom bid for services - custom bid for services - annual maintenance contract for ground support equipment-work / schedule of requirement for maintenance, to be undertaken during period of amc, 1. adaptor maintenance stand pt no. 284557-1-1, 1.1, 1.2, 3.1, weekly inspection, 1.1.1 visually check the serviceability of item., 1.1.2 check cleanliness and husbandry state of the item., monthly inspection, 1.2.1 check visually condition of the item., 1.2.2 check condition of rubber beading., yearly inspection, 1.2.3 check item for operational condition., 1.2.4 painting of the item., 2. towing arm for dornier aircraft pt. no. misc-1512, 2.1 weekly inspection, 2.2, 2.1.1 visually check the serviceability of item., 2.1.2 check cleanliness and husbandry state of the item., 2.1.3 lubricate moving parts., 2.1.4 check the condition of wheel., monthly inspection, 2.2.1 clean and apply grease on moving parts., 2.2.2 check visually condition of the item., 2.2.3 check condition of wheel., 2.2.4 check condition of rubber beading., 2.3 yearly inspection, 2.3.1 check item for operational condition., 2.3.2 painting of the item, 3. nitrogen trolley with gauge pt. no. misc-5011, 3.1 daily inspection, 3.1.1 check for the general condition of the trolley., 3.1.2 check the n2 pressure available in bottle., 3.1.3 check for any static leak., 3.1.4 check all wheel for free rotation., 3.1.5 calibration of gauge when due., 3.2 weekly inspection, t 3.2.1 check the operational serviceability state of item., 3.2.2 check cleanliness and husbandry state of kit., 3.2.3 check for any leakage and erratic reading shown by pressure, gauges., 3.2.4 operate as per user manual and put appropriate label to indicate, the state., 3.2.5 check the condition of wheel., 3.2.6 check for pressure in cylinder and serviceability of gauges., 3.3 monthly inspection, 3.3.1 clean and apply grease on cylinder knob screw., 3.3.2 check visually the condition of hose., 3.3.3 test regulator for proper functioning., 3.4 yearly inspection, 3.4.1 check gauge for calibration, 3.4.2 check condition of wheel., 3.4.3 painting of whole unit., 3.4.4 calibration of hose., 4. jack adopter nlg pt no. u01a070000, 4.1 weekly inspection, 4.1.1 check cleanness and husbandry state of item., 4.1.2 check the serviceability state of item as per the user's manual., 4.2 yearly inspection, 7.1.1 painting of whole unit., 5. jack nose/main pt. no. vtej-3610, 5.1 daily inspection, 5.1.1 check the serviceability state of item as per the user's manual., 5.1.2 check for any signs of leak., 5.2 weekly inspection, 5.2.1 visually check the serviceability of the jack and wheels., 5.2.2 check cleanness and husbandry state of item., 5.2.3 lubricate the moving parts., 5.2.4 check the serviceability state of item as per the user's manual., 5.2.5 check the oil level port and plug., 5.3 monthly inspection, 5.3.1 replenishment of oil., 5.4 yearly inspection, 5.4.1 load testing (load testing is mandatory after, serviceability), 5.4.2 authority: - oem operation and maintenance manual., 6. jack tail pt. no. vaj-1.5/650, 6.1 daily inspection, major un6.1.1 check the serviceability state of item as per the user's manual., 6.1.2 check for any signs of leak., 6.2 weekly inspection, 6.2.1 visually check the serviceability of the jack and wheels., 6.2.2 check cleanness and husbandry state of item., 6.2.3 lubricate the moving parts., 6.2.4 check the serviceability state of item as per the user's manual., 6.2.5 check the oil level port and plug., 6.3 monthly inspection, 6.3.1 replenishment of oil., 6.4 yearly inspection, 6.4.1 load testing (load testing is mandatory after, serviceability), 6.4.2 authority: - oem operation and maintenance manual., 7. working platform engine pt. no. 63205a-000-000aoof, 7.1 weekly inspection, 7.1.1 visually check the serviceability of the item., 7.1.2 check cleanliness and husbandry state of item., 7.1.3 lubricate the moving parts., major un7.1.4 check the condition of the wheel along with the
Tender For bid to ras bid to ras supply of impact testing machine charpy and izod , digital torsion testing machine , digital spring testing machine , rockwell cum brinell hardness tester , universal testing machine , wheel balancing machine , abs system trainer , electric vehicle kit , diesel fuel supply system , mpfi, four stroke four cylinder petrol engine test rig with eddy current dynamometer , model of mpfi system , model of crdi system , metallurgical microscope , metallurgical cut off machine , polishing machine , spark test apparatus , tool maker microscope , magnetic v block , angle deckor with set of angle gauges , profile projector , screw thread micrometer , sine bar , gear tooth vernier , sand mix muller , hand rammer , pneumatic rammer , shaper , milling , power hacksaw , circle cutting machine , edge folding machine , foot shear machine , digital multimeter , portable digital power factor meter , dc regulated power supply , portable digital wattmeter three phase , analog multimeter , digital lcr meter , digital clip on meter , current transformer , potential transformer , digital earth tester , portable digital power factor meter, single phase , portable digital frequency meter , digital flux meter , analog megger insulation tester , digital megger insulation tester , variac single phase , variac three phase , stroboscope , synchroscope , single phase resistive load , three phase resistive load , sliding rheostat wire wound , lte mobile trainer kit , am modulaor demodulator kit , psk modulator demodulator kit , qpsk modulator demodulator kit , am transmitter kit , arduino kits with modules , trainer board to study the effects of negative feedback on the amplifier characteristics , trainer board of two stage transformer coupled amplifier , trainer board of two stage direct coupled amplifier , trainer board to study characteristics of class a amplifier , optical fiber splicing machine , optical time domain reflectometer , pcb etching machine , pcb drilling machine , oil fired tilting type furnace impact testing machine (charpy & izod) with maximum capacity= 300 j for charpy 168 j for izod maximum scale graduation = 2 j, digital torsion testing machine with maximum torque capacity= 100 nm and lc 0.01 nm, digital spring testing machine with maximum capacity= 100 kn measuring range = 0- 100 kn load resolution= 5 n resolution of piston movement= 0.1 mm, rockwell cum brinell hardness tester with manual load selection and automatic zero setting dial gauge, universal testing machine with max capacity 100 kn load range: 0 100 kn load resolution: 2 n ram stroke: 150 mm, wheel balancing machine with weight of rotor= 0.5-10 kg max. weight on each pedestal= 7.5 kg max. diameter of rotor over bed= 600 mm, abs system trainer with four two wheels with wheel sensors and abs hydraulic actuator (modulator) unit which is controlled by the on-board computer system (ecu)., electric vehicle kit with ev controller, motor used in electric vehicle, battery used in electric vehicle, on board charger dc to dc converter,ac complete kit, transmission system etc, diesel fuel supply system with training board tank, the fuel transfer pumps, filters, injection pumps and the injection nozzles., mpfi, four stroke four cylinder petrol engine test rig with eddy current dynamometer, actual working metallic model showing various parts of mpfi system, actual working metallic model showing various //bid details 2 / 58
Tender For corrigendum : supply of maintenance of 250 kva transformer and ht yard including supply and installation at stpi kakinada d d - oil filtration for 250kva transformer , transformer oil bdv testing and report , supply of transformer power oil -billing as per the actual usage , supply of 3cx35sqmm ht cable kits outdoor , ht cable kit for end termination , a. las 9kv 5ka polymer type with lighting insulator suitable for 11kv system phase to earth application b. discharge current rating 5ka. c. mounting vertical. d. voltage 9 kv. , earth pits meggering and test report , painting of 11kv dp structure -sp and dp structure painting with aluminum paint including paints , painting of transformer -transformer spray painting with siemens grey paint including paints , threading type silica gel breather - 250 grams -diameter 0.5 inch bsp , 11kv single pole structure hg fuses set , 11kv ab switch male and female connector , 11kv dp structure hg fuses arms set , transformer pad clamps , ht yard maintenance work - double pole structure, 11 kv ab switch, hg fuses, jumpers, la erection and maintenance, department single pole structure maintenance and hg fuses replacement.
Tender For bid to ras supply of 4x4 assy checkinfg and faulty removing full electric connection checking and mechanical fault removing and testing 4x4 , ramp assy removing the veh and taken to machine shop, stripping, checking, cleaning all damaged and burned seals, spring o rings change and ramp assy and testing and fitting the veh hood operated , transfer case mounting bracket , transfer case mounting male and female nut and bolt , transfer case gear box hanging assy , the above mentioned all parts removing the veh and after service fitting the veh and veh testing mechanical charges , starting problem rotary pump not working, pump removing the veh and taken to the pump house and steipping all parts cleaning and checking following defective parts change nozzle , pump body damaged change , positioner change , packing kit , tapper roller and valves , pump full service and above mention parts fitting damaged packing seals change pump assy injector nozzle fitting and pump nozzle testing calibrating computerised machine , transfer case mounting bolt male and female , the above mentioned all parts removing the veh including rotary pump and after sevice fitting the veh and veh starting trouble testing veh road testing mechanical charges , steering gear box faulty removing the veh and taken to lathe machine shop stripping checking all parts oil seals warm shaft damaged warm , door lock rh and lh , 4x4 assy checking and faulty removing and full electric connection checking and mechanical fault removing testing 4x4 , relay and damaged wiring checking and relay , gear box assy removing the veh and clutch plate pressure plate release bearing clutch housing removing and checked lutch plate charge , pressure plate change , release bearing change , clutch housing change , clutch boosterr change , fly wheel skimming and finishing , the above mentioned old parts removing and gear box servicing all parts fitting and veh road testing mechanical charges , exhaust brake system removing and full service and full service and fitting , wiper assy removing and full service and fitting , transfer case balancing bracket gear box hanging assy , clutch master cylinder assy , full electrical system checking and burning realy looms lights wiper system all service and fitting , the above mentioned all parts removing and fitting mchanical labour charges
Tender For supply of model of mpfi system , model of crdi system , tool kit , pressure gauge , compound gauge , thermometer with case , leak dedector to detect cfc hfcs , thermostatic switch lp-hp cut out overload protector filters strainers and filter driers , refrigeration cycle testing rig , gas charging kit , split ac test rig , actual cut section model of screw compressor , actual cut section model of rotary compressor , vapour absorption refrigeration test rig , vaccum pump , ice plant trainer , sling psychrometer , single plate clutch , multi plate clutch unit , centrifugal cluth unit , cut section of synchromesh gear box , model of rack and pinion steering gear , model of power steering gear or re-circulating type worm and wheel or other type of steering gear , model of ac pump , model of su pump , automobile electric system , brake master cylinder , sliding mesh gear box , cut section model of 4 cylinder 4 stroke petrol engine , diesel fuel supply system , abs system trainer , air compressor for tyre inflation , inverter , electric vehicle kit , software , acetylene cylinder , acetylene pipe 15 meter , acetylene regulator with spanner , anvil 50 kg with stand , earthing cable 50mm 06 meter , electrode holder simple , electrode holder heavy duty , gloves , hand hacksaw frame , oxygen regulator with spanner , oxygen cylinder , oxygen pipe 15 meter , single snip , welding screen , welding torch high pressure , welding torch low pressure , carpentry bench vice , firmer chisel , gimlet , plough plane 200 mm , spoke shave plane , tenon saw 12 inch -300mm , analog meggar , desert cooler , digital earth tester , earth leakage circuit breaker single phase , earth leakage circuit breaker single phase three phase four pole , electric oven , heat convector , motor coil winding machine , residual current circuit breaker single phase , residual current circuit breaker single phase three phase four pole , leg vice 4 inch , swage block 4 inch , bench grinder 0.5 hp motor , bench vice heavy duty , flat file rough 10inch , flat file smooth 10inch , grinder , pipe vice , round die handle , tap wrench 5by16 inch to 1 inch , edge folding machine , foot shear machine , funnel stake , grinder machine , hand shear 12inch bent snip aviation snips , hand stake , hearth anvil , round stake , taper stake , gaggers , hand rammer , ladle , lifter- tong 2 in 1 , molding boxes flasks , oil fired tilting type furnace , pneumatic rammer , riddle , sand mix muller , drilling machine , grinding machine heavy duty , planner , power hacksaw , shaper , welding cable 50mm copper apparatus for verification of law of polygon of forces:apparatus consisting of a wooden board of approx 20 mm thickness of size 24x30 inches, fixed on a wooden slotted frame. four adjustable frictionless aluminium pulleys to be provided in the slots of the frame and the frame to be provided with suitable arrangements for fixing it to a wall., simply supported beam apparatus:apparatus consists of two compression dial type spring balance and a wooden beam of length 1m, minimum cross section 2cmx5cm with all weights and accessories, inclined plane and friction slide apparatus:apparatus consisting of wooden plane of minimum size 60x15 cms having adjustment for setting the angle precisely. apparatusshould be supplied completely with frictionless pulley, linear and circular scale, pan, a wheeled trolley and a set of minimum six slide draws (having bottom of metalic and non metalic materials)., winch crab single purchase apparatus:apparatus consisting of a heavy duty c.i. wall brackets. the grooved wheel of 25 cm dia and a set of gearing arrangements (machine cut //bid details 2 / 130 gears) to be provided for measurement of efficiency of winch crab complete set with accessories., apparatus for determining centre of gravity of regular & irregular lamina:apparatus consisting of a rod mounted on a base with a screw at the topand 8 laminas of clear acrylic material- circular,triangular, square, trap
Tender For supply of head gasket , cabin control unit deep freezer , control logic unit , oil filter , pre fuel filter , hand grinder carbon bush , bosch professional cutter machine carbon bush , shim brass pati , silicone heavy duty manual gun , jubilee clip all type , jack hydraulic 12 ton , tyre puncture kit , hyd filter , air filter , fuel filter , cca control card assy coral exch , mov filter s14k300 , sanchar hand held antenna , sanchar hand held bty lock clip , capacitor 250 v 220 mfd , capacitor 400 v 4 7 mfd , irf 3205 , diode , scr tyn 632 , bjt hcd 709 , zener diode , on off switch , soldering iron bit , spym 307 lm 25x25 transistor , mbr 20100 ct xcla mosfet , d 13009k transistor , 3 k ohm resistance , cutting pliers , wire stripper , viper 12a ic , igbt 25n120 , dc testing lamp , lcs card of coral exchange 2000 , pcb board of 1 kva microtech ups , wi fi router , tele set m71 , aux cable lead
Tender For machinery and equipment of electrician trade - schedule 1, discrete component trainer, linear i.c. trainer, digital i.c. trainer, electrical machine trainer , schedule 2, a. electric induction plate, b. electric kettle, c. electric iron, d. immersion heater, e. a.c. ceiling fan and ac table fan, f. geyser (storage type), g. mixture & grinder, h. washing machine semi-automatic, i. motor pump set, voltage stabilizer, inverter with battery, schedule 3, current transformer, potential transformer, dc series motor coupled with spring balance load, dc shunt motor, dc compound motor with starter and switch, ac squirrel cage motor with star delta starter and triple pole iron clad switch fuse with mechanical load., ac phase-wound slip ring motor with starter switch, universal motor with starter/switch, synchronous motor with accessories like starter, excitation arrangements., thyristor /igbt controlled d.c. motor drive with tacho-generator feedback arrangement, thyristor/igbt controlled a.c. motor drive with, single phase transformer, core type, air cooled, three phase transformer, shell type oil cooled with delta/ star, a.c. series type motor, single phase capacitor motor with starter switch, manual motor coil winding machine, ceiling fan coil winding machine, stepper motor with digital controller, shaded pole motor, schedule 4, dc power supply, solar panel with battery, smart meter, ev charger, ev charger (home), battery charger, schedule 5, oil testing kit, primary current injection set, schedule 6, d.c. shunt generator with control panel, motor-generator (ac to dc), d.c. compound generator with control panel including fitted rheostat, voltmeter, ammeter and breaker, motor generator(dc to ac) set consisting of - shunt motor with starting compensator and switch directly coupled to ac generator with exciter and switch board mounted with regulator, breaker, ammeter, voltmeter frequency meter, knife blade switch and fuses etc. set complete with cast iron bedplate, fixing bolts, foundation bolts and flexible coupling., diesel generator set with changeover switch, over current breaker and water/ air-cooled with armature, star-delta connections ac 3 phase