Latest vibration transducer Tenders | Government vibration transducer Tenders

Central Government/Public Sector

CTN :45105064

23 Jun, 2026 NA

Pallikaranai - Tamil Nadu

Tender For corrigendum : supply, fixing and testing of wall mounting fan, timer, cd contactor, va led display meter, cos and cable termination for existing panel board in utility-i building at niot campus.

Central Government/Public Sector

CTN :45555774

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply, termination installation, testing and commissioning of ventilation system on roof of paint shop of lower parel workshop along with complete installation, frame work of suitable size with ms 50mmx 50 mmx 5mm, cabling, cable try work, wiring and protection system with 4 pole 20a mcb for each and mcb board along with 2.5 sqmm cable 4 core and 10 sqmm cable from panel to distribution board for main supply and power full exhaust system of length and height minimum 1 meter with width minimum 400 mm, diameter blades 900 mm, blades rotational speed -620 r/min or more. air flow 30,000 m?/h, noise level shall be less than 70 db, power shall be minimum 750 watt with the flap system and motor starter of 1 hp or as per suitable and confirming to s/iec 60947-4-1 or latest. all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt i) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45095884

25 Jun, 2026 NA

Tapi - Gujarat

Tender For corrigendum : supply of various consumables items for emd ii unit 3, 4 & 5, utps. (emd - 5 et-6261) - w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, 901 easyclean (nf) 500 ml. spray can - on line electrical contact cleaner., kli - nit ct-2 self spraying type in 350ml can packing, grease gun, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, crimper plier,self adjustable crimping tools used for 0.25-6.00 sqmm cable end sleeves, led torch, rechargeble torch, puf seal self expanding foam for sealing, measure tape 30 meter, pebble ral 7032 color spray bottle for electrical ht / lt panel, impact wrench power/battery operated, platform truck.size:-60 length x 35 width, allen key set black finish of mm series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys, hand drill machine size 13mm, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, filler gauge set of 26 blades, skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic bearing puller kit, make- skf, model no- tmma 75h/set, width of grip external 52-200 mm, effective arm length - 200 mm, withdrawal force- 75 kn, high speed portable blower,550 w (min.),cap-3.8 m3/minute,16000 rpm,1.7 kg., bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, hss drill bit set 3 mm to 12 mm, high abrasion (12000 abrasion cycles) with cut & mechanical hazard safety hand gloves made from 100 micro foam nitrile coated over breathable hppe thinnest cut resistance shell

Central Government/Public Sector

CTN :45550902

14 Jul, 2026 NA

Kapurthala - Punjab

Tender For multi-function energy meter 5a or 1a ct input for lv or hv networks ac or dc aux supply. measurement & display u,v ,i, ln, p, q, s, pf, f, ea, er & es. thd for v & i with lead bar graph in 96x96 sqmm. flush mounted case with six direct access keys & backlit lcd, accuracy class 1.0, as per rcf specification no. edts 103 rev-d with amendment no 1 to 7, suitable for use in lhb type power car's control & power panel. accepted make & cat nos.: - as per sr. no. 1 of pcee/rcf/kapurthala letter no. file ed2009 dated 17.01.25, and as per sr. no. 32 of bom of edts 103 amendment no. 4 (excluding m/s ae make model no. ae9000) or any other make approved by rcf/rdso. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted:max 8 lacs ] ]

State Government

CTN :45566376

30 Jun, 2026 4.43 Crore

Delhi - Delhi

Tender For supply of supplying and fixing of 12 module 200 mmx150 mm , supplying and fixing 3 pin 5 a ceiling rose on the existing junction boxby wooden block including connections etc. as required , installation testing and commissioning of ceiling fan. , installation of 450 mm exhaust fan , supplying of 100 a 16 katpmccb , supplying of 125 a 16 katpmccb , supplying of 150 a 16 katpmccb , supplying of 250 a 25 katpmccb , supplying of 400 a 35 katpmccb , supplying of 630 a 35 katpmccb , supplying of 125 a 36 ka fpmccb , supplying of 630 a 50 ka fpmccb , supplying and fixing following way single pole and neutral sheet steel mcb distribution board8 way double door , supplying and fixing following way single pole and neutral sheet steel mcb distribution board12 way double door , supplying and fixing following way single pole and neutral sheet steel mcb distribution board16 way double door , supplying and fixing following way horizontal type three pole and neutral sheet steel mcb distribution board 8 way 4 plus24 double door , recess mounting vertical type 6 way 4 plus18 double door , recess mounting vertical type 8 way 4 plus24 double door , recess mounting vertical type 4 way 4 plus12 double door , recess mounting vertical type 12 way 4 plus36 double door , supplying and fixing of single pole 16to32 , supplying and fixing of double pole 20to32 , supplying and fixing of triple pole 25to32 , supplying and fixing of triple pole and neutral 25to 32 , supplying and fixing of 06to32 a double pole mcb , supplying and fixing of 40to63 a double pole mcb , supplying and fixing of 10to32 a tp pole mcb , supplying and fixing of 40to63 a tp pole mcb , supplying and fixing of 06to32 a four pole mcb , supplying and fixing of 40to63 a four pole mcb , earthing with g.i. earth pipe 4.5 meter , earthing with g.i. earth plate 600 mm x 600 mm x 6 mm , supplying and laying 25 mm x 5 mm g.i strip at 0.50 metre , providing and fixing 6 swg dia g.i. wire , supplying and making outdoor end termination 4c x 10 sqmm 25mm , supplying and making outdoor end termination 4c x 35 sq. mm 32mm , supplying and making outdoor end termination 4 x 50 sq. mm 35mm , supplying and making outdoor end termination 4c x 95 sq. mm 45mm , supplying and making outdoor end termination 4c x 120 sq. mm 45mm , supplying and making outdoor end termination 4c x185 sq. mm 87mm , supplying and making outdoor end termination 4c x 300 sq. mm 70mm , supplying and making outdoor end termination 4c x 400 sq. mm 82mm , supplying and replacement of 25 amp 2 pole rccb 30ma , supplying and replacement of 40 amp 2 pole rccb 30ma , supplying and replacement of 63 amp 2 pole rccb 30ma , supplying and replacement of 40 amp 4 pole rccb 30ma , supplying and replacement of 63 amp 4 pole rccb 30ma , supplying and making straight through joint 3.5 x 70 sqmm , supplying and making straight through joint 3.5 x 120 sqmm , supplying and making straight through joint 3.5 x 185 sqmm , supplying and making straight through joint 3.5 x 240 sqmm , supplying and making straight through joint 3.5 x 300 sqmm , laying of upto 35 sq. mm , laying of above 35 sq. mm and upto 95 sq. mm , laying of above 95 sq. mm and upto 185 sq. mm , laying of above 185 sq. mm and upto 400 sq. mm , laying and fixing of upto 35 sq. mm , laying and fixing of above 35 sq. mm and upto 95 sq. mm , laying and fixing of above 95 sq. mm and upto 185 sq. mm , laying and fixing of above 185 sq. mm and upto 400 sq. mm , supplying installation testing and commissioning of led surface mounted batten light , supplying installation testing and commissioning of //bid details 2 / 123 led recessedby surface down lighter , supplying installation testing and commissioning of panel light , supplying installation testing and commissioning of street light , supply installation testing and commissioning of decorative post top light , supplying fixing testing and commissioning of 10to12w led bulkhead fixture , supplying installation testing and commissioning of 30 watt

State Government

CTN :45414122

17 Jun, 2026 1.90 Crore

Jalandhar - Punjab

Tender For corrigendum : prov installing and drilling of 550 mm dia bore with reverse rotary rig up to 160 mtr. depth including cost of 20 mtr stainless strainer const of pump chamber pumping machinery di fitting rising main ohsr of 250 kl capacity complete in all respect. - augmentation of water supply scheme village padhiana block adampur distt. jalandhar (under head: nabard 31/4215) providing, installing & drilling of 550 mm dia bore with reverse rotary rig up to 160 mtr. depth including cost of 20 mtr stainless strainer, construction of pump chamber of size 3.05m × 3.70m with wc, providing & installing pumping machinery, di fitting, disinfections unit, rising main(10kg/cm2), household connections with water meter and distribution system, solar panel, bulk meter, environmental charges, development of water works, construction of 1 no. ohsr of 250 kl (2,50,000 ltrs) capacity with sill level not less than 23.50m height upto fsl 27.50 m from formation level complete including the cost of inlet, outlet, overflow & scour & vertical pipes, di duck foot bends, expansion joints, puddle collar, lightening conductor, earthing, aluminium ladder inside the ohsr stair case, scour/overflow sluice valves, d/f extension joints, automatic electronic water control device and construction of plinth protection around ohsr, all civil works as per site complete in all respects.

Central Government And Public Sector

CTN :45550893

19 Jun, 2026 NA

Bilaspur - Chhattisgarh

Tender For supply of single phase 2 hp submersible pump starter, having contactor 02 pole and thermal ol relay (make: havells, bch, lsis, l&t) with start and run capacitor, panel meter indicator and on off push button, panel should be automatic and no need to push extra push button to change capacitor, provision require for connecting externally minilec make water level controller or eapl/ l&t time switch to make it fully automatic. make: lsis, bch, l&t, kirloskar or equivalent [ warranty period: 30 months after the date of delivery ] ]

CTN :45566304

06 Jul, 2026 NA

Ernakulam - Kerala

Tender For supply of cat 6 awg cable , single i and o box with accessories , e 2000 cables 5 meter , 9u rack 500 depth , 6 core armoured fiber cable , 1gb sfp , 24 port patch panel loaded , 2 meter casing caps , 32 mm hdpe pipe for fiber laying , earthing charges for ups and rack , laying of cable and termination charges

CTN :45535219

20 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of ece department lab electronics equipments - equipments for ece, dual output regulated dc variable power supplyinput voltage : 230v/50hz acoutput voltage :(0-30)v dcoutput current :(0-2)a dcprotection circuit : over voltage, over current, and short-circuit protectionhigh efficiency : greater than 85%low ripple and noise : less than 50 mvdigital display, function (signal) generatorspecs:frequency range : 0.1hz to 5mhzdisplay :4 to 6 digit led displayoutput waveforms : sine, triangle, square, pulse, rampamplitude :0-20 vpprise time :100 nsdistortion : 1% within specified frequency rangepower supply : 230v ac 10% , 50-60 hzoutput amplifier protection : short circuit and 15voverload protectiondc offset: 0 to 10 v adjustableattenuation: 0 to -60 db, decade resistance box range : 1 to 1m rotary switch selection with 6 dialssteps : 1 , 10 , 100 , 1k , 10 k , 1m accuracy : 1%, decade capacitance box range : 100 pf to 100 frotary switch selection with 6 dialsmaximum voltage : 350vaccuracy : 1%, decade inductance box range : 10 h to 10 hrotary switch selection with 6 dialslow-loss inductorsaccuracy : 1%, sim reader trainer kitpower supply :operates on 230v ac 10%, 50hz mains supplybuilt-in regulated smps power supplyoperating dc supply : 5v/12v with overload and short-circuit protectionsim card interface :supports gsm sim cards compatible with 2g / 3g / 4g / 5g networkssim card read/write interfacesupports sim card initialization, authentication and communication functionscompatible with standard 6-pin / 8-pin sim card socketscommunication interface :usb 2.0 interface for pc communicationrs-232 serial communication interfaceuart communication facility for embedded system interfacingsim operating parameters :selectable sim clock frequencies3.579 mhz7.159 mhz14.318 mhzsim supply voltage selection facilitysim reset and activation controlsupported protocols and standards :gsm etsi 07.07 and etsi 07.05 at command supportiso/iec 7816 smart card communication supportsim communication command monitoring facilityhardware features :on-board sim card socketled indication for :power statussim detectionreset activityuser manualutility software cd / downloadable software packagedata transmission/receptionbuilt-in keypad for standalone operation.lcd display module (128 64) for menu and status display.on-board microcontroller-based control section.software support:at command execution and monitoring software.sim manager utility software.data logging and communication terminal utility.pc-based gui software for sim data communication experiments.trainer features:fault simulation facility for troubleshooting experiments.simulation of faults such as:sim not detectedclock failurevcc failurereset failuremultiple on-board test points for signal observation.test points for:sim rstsim_clksim iovccuart tx/rxsuitable for cro/dso signal monitoring.glass epoxy pcb with educational block diagram layout.compact tabletop enclosed cabinet design.construction:front panel with printed block diagram.banana test points and patching facility.standard accessories:gsm sim trainer unit.usb communication cable.rs-232 communication cable.power cord., microwave test bench with reflex klystron oscillatormicrowave source :relex klystron tube with klystron mountoperating frequency in x-band (8.2ghz to 12.4ghz)electronic tuning through repeller voltage controlsuitable for cw microwave generationklystron powersupply:regulated klystron power supply unitbuilt-in modulation facilityoverload and short circuit protectionoperates on 230v ac 10%, 50hz mains supplywaveguide components:isolator variable attenuatorfrequency meterslotted line section with tunable probecrystal detector mountmatched loadmovable short / terminationwaveguide stands and accessoriesmeasurement unit:solid state vswr meter with high sensitivityswr measurement facilitysuitable for detector output monitoringtechnical specification :frequency range : 8.2 ghz to 12.4 ghzwaveguide types : wr-90detector type : crys

CTN :45532259

21 Jun, 2026 NA

Kanchipuram - Tamil Nadu

Tender For supply of mechanical and electrical equipments - supply - mechanical lab equipments, single phase ac circuit kit for voltage, current and power measurement- 5a,300v, 300w/5a measurement of power by using various loads analog voltmeter 0-300v ac panel mountedanalog ammeter 0-5a ac panel mountedanalog wattmeter 1.5kw ac panel mountedsingle phase digital power monitor to measure powersingle phase ac lamp load 230v/5a 1kwpanel enclosure with hylam front panel with input/outputterminal outlets , mcb elcb trainer kit- 1 phase/3 phase, 2/3/4 pole, 3a-16a single pole mcb 2-5ampstwo pole elcb 30malamp load single phase 5amps panel enclosure and terminal outlets, four stroke petrol engine cut section model - single cylinder four stroke petrol engine cut sectional model with carburetor, spark plug, cut cylinder, piston, connecting rod, crank shaft, valve mechanism, cam shaft, timing gears and flywheel. all parts cut opened to study the components and its working provision to take values for valve timing. surface finish: painted and color coded for easy identification of components mounting: heavy-duty ms fabricated stand/base display type: static / dynamic demonstrationmodel, dc motor - type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armaturefeatures: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder - bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, bearing with shaft assembly - type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips lock nuts end coversmounting: bench-mounted / frame-mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit- the plummer block housing material: cast iron (grade fg 200 or equivalent).type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: groundcarbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., (a).sliding mesh gear box for dismantling and assembling - (a) max transmitted power 1to1.5hp, torque capacity- 40 to 200nm, number .of speed 3 to 6, gear module 1.5 to 2, sliding mesh gearbox gearbox type- sliding mesh forward gears- 3reverse -yes gear material -alloy steel lubrication- splash / oil gear teeth- spur typical gear ratios- 3.2:1 / 2.0:1 /1.3:1 input speed- 0 1800 rpm housing material- cast iron(b) constant mesh gear box cut section - constant mesh gearbox (cut section) gearbox type :constant mesh forward gears :4 gear teeth -helical / spur dog clutch type- sliding lubrication -oil sae 80w90 housing- cut section material -hardened alloy steeleducational features-labeled parts., measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement., accessories: includes a set of slotted weights (e.g., (6times 50g) or similar sets) for incremental loading.

Vibration Transducer Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

State Government

Central Government And Public Sector