Web Analytics Made Easy - StatCounter

Vibratory Roller Scrap Tenders

Get complete information related to latest Vibratory Roller Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Vibratory Roller Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Vibratory Roller Scrap Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45365796 Due date: 27 Jun, 202627 Jun, 2026 11.50 Lacs
Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

Central Government/Public Sector

CTN :45365852 Due date: 20 Jun, 202620 Jun, 2026 40.00 Lacs
Tender For repair to certain roads including road furniture at kalimpong mil stn under ge 867 ews - m&l for repairs to pot holes of depth exceeding 30 mm thick, area not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads , paths etc cutting around edges to at least 25mm in depth, and making good by applying tack coat with paving bitumen grade 10 pack primer (vg-10) @ 5kg per 10 sqm putting in premixed bituminous macadam, well rammed and sealed with binder with paving bitumen grade 30 pack (vg-30) @9.8 kg per 10 sqm blinded with 0.09 cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exc 30 mm, complete all as specified and directed., m&l for preparing existing black top road surface by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with bitumen primer using paving bitumen grade 10 pack (vg-10) @ 5kg per 10 sqm, complete all as specified and directed., m&l for premix bituminous macadam using paving bitumen of grade 30 pack (vg-30) @ 4% by weight of total mix laid / rolled and compacted to required gradient and camber with 8 to12 tonne power road roller and rolled to a uniform smooth surface (consolidated thickness 75 mm or less), complete all as specified and as directed., m&l for 40 mm thick consolidated thickness bituminous premixed carpet with 0.54 cu.m per 10 sqm of stone chipping and mixed with 29.20 kg per 10 sqm of binder using paving bitumen grade 30 pack (vg-30) laid and rolled with 8 to 12 tonne power road roller and compacted to required camber and gradient, complete all as specified and directed., m&l for liquid seal coat by applying paving bitumen of grade 30 (vg-30) @ 9.8 kg per 10 sqm blinded with 6.3 mm size stone chipping @ 0.09 cum per 10 sqm and rolled to a uniformed smooth surface by 8 to 12 tonne power road roller, complete all as specified and directed., providing and lying mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29 using approved coarse aggregates, fine aggregates filler materials and bitumen, prepared by using mastic cooker including cost and carriage of all ingredients, cost of heating aggregates and binder mixing in specified proportions conforming to approved job mix formula and laid to required level and slope after cleaning the surface, compacting, sealing the construction joints and surface finishing conforming to specifications including providing antiskid surface with bitumen pre-coated fine arraigned hard stone chipping of 13.20mm nominal size at the rate of 0.005 cum per 10 sqm and at an approximate spacing of 10 cm centre to centre in both directions, pressed into surface when the temperature of surfaces not less than 200c, protruding 1 mm to 4mm over mastic surface including the hire charges of all tools and plants and machinery, pay of operators, cost of fuel and lubricants and quality control all complete as per clause 516 of specification for road and bridge works of morth (5th revision). 25mm thick (pakur) vg-30 (po, 10/20 (p), complete all as specified and directed, supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed., supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with pama striplens reflector of model no. da 972.0 fixed with and incl ms stud of suitable size as per manufactures instructions and all as specified and directed., m&l for applying ther

CTN :44959001 Due date: 01 May, 202601 May, 2026 86.8 Thousand
Tender For repair to vehicle - dismantaling and opening of stering assembly repairing and replacing the following necessary spare parts fitting and testing including supply of the following parts , assy.kit-suspension rubber parts , assy tie rod , centre link assy 113 08 364 0c , bush , ball joint assy-upper wb , assy ball joint lower , taper roller brg 30205 , taper roller brg lm48548 , assy pipe union bolt , wheel cylinder assy , thrust washer-idler arm , split pin 6.3 x 6.3 , cotton piece , oil seal , grease pack , assy top wishbone , gasket fip to support , sealing washer 8 x12 is 3175 cu , fuel paper element , dismantaling and opening of gear box clutch plate brake system , repairing and replacing the following necessary spare parts fitting and testing supply of the following parts , assy accelerator cable hand brake , brake oil , front brake pad , rear brake lining , master cylinder kit , assy 10 inch vacuum booster , kit brake lining non-asb af2873 , nut , castrol extra long life gear oil 80 w 90 , nyloc nut m14 , washer , split pin 3.2x22 , gasket , clutch plate , pressure plate , release bearing , flywheel , taking out old unsv lub oil filter , fuel filter , air filter and draining of engine oil complete inclding refitting and supply of the following items , lub oil filter , fuel filter element primary , fuel filter element secondary , air filter element , engine oil 20w 40 make -castrol gtx , taking out old unsv external body light , fog light complete including refitting and supply of the following items , wind shield , tail light set , fog light , wiper , washer fluid tank , side mirror orvm , cleaning , washing and polishing of above mention vehicle as per standard norms , testing of vehicle on road after completion of work for smooth running upto entire satisfaction of age e m bagdogra

CTN :44413402 Due date: 10 Apr, 202610 Apr, 2026 20.00 Lacs
Tender For lok nirman material - opc cement, ppc cement, khajuraho sand, son sand, local clay bricks, chimney bricks (20x10x10 cm - buddha), chimney bricks (allahabadi), stone blocks (20x20x20 cm - buddha), hand-broken crushed stone (40 mm), hand-broken crushed stone (95-45 mm), hand-broken crushed stone (65-45 mm), machine-crushed stone (40 mm), machine-crushed stone (20 mm), machine-crushed stone (12 mm), stone slabs (25 mm), stone slabs (30 mm), stone slabs (40 mm), stone lintels (100 mm), shuttering - roof (steel/plywood), shuttering - columns/beams (steel/plywood), shuttering - roof (wood), shuttering - columns/beams (wood), concrete mixer machine rental (8 hours, incl. fuel), vibrator machine rental (8 hours, incl. fuel), pvc ceiling work (completed job), dumper rental (8 hours, incl. fuel & driver), tractor rental (12 hours, incl. fuel & driver), static roller rental (8 hours, incl. fuel & driver), vibratory roller rental (incl. fuel & driver), ms reinforcement bars (10, 12, 16, 20 mm), ms reinforcement bars (8, 6 mm). binding wire, fencing wire, m.s. grills and mesh, complete iron doors and windows, white cement, distemper, primer, varnish, paint, wire pins and oil, concrete poles (0.1m x 0.1m x 1.5m), concrete poles (0.1m x 0.1m x 1.8m), 125mm/150mm bore cleaning, 125mm/150mm diameter drilling work, casing pipes (125mm diameter upvc), casing pipes (150mm diameter upvc), casing pipes (125mm diameter g.f.), casing pipes (150mm diameter g.f.), casing pipes (125mm diameter m.s.), casing pipes (150mm diameter m.s.). for the year 2026-27: minor original and repair works (road construction) up to rs. 1.00 lakh, as per issr dated august 02, 2021; and minor original and repair works (building construction) up to rs. 1.00 lakh, as per issr. as of august 2, 2021: hume pipe np3 (300 mm dia.), hume pipe np3 (450 mm dia.), hume pipe np3 (600 mm dia.), hume pipe np3 (900 mm dia.), hume pipe np3 (1000 mm dia.), hume pipe np3 (1200 mm dia.); installation of slider windows; installation of plywood-sunmica doors; whitewashing work (including labor for emulsion application); putty work (including material and labor); and in-situ installation of rcc dasa (100 mm thick).

CTN :43420263 Due date: 08 Apr, 202608 Apr, 2026 NA
Tender For corrigendum : tender for supply of spring decompression shaft , washer lock , spherical washer , expansion bellow , screw socket hand cap , flexpoint hose dn8 l 1000 , probe mbt4 s 120 18x150 f3 , spacer , camshaft stud , assembly valve gear , starting air valve washer , nozzle injector , loctite 601 , inlet manifold seal , nut for shaft , key for damper , screw m12 40nsepoint12 g10point9 , flexmast coupl pipe 88point9mm opointd 096500v3point650 , joint dn 150 , loctite 648 , hose , engine controller , joint for ca 45 ca 50 and ca50s , disc spring , lub oil cooler , spring valve inner , valve guide with pair , bush lowering , joint , nozzle holder , seal oil for ca42 , joint 0point005 , ring rubber top for push road tube , valve seat , o ring exhpoint valve guide 60 c7 id18x2point5 , nut castle , cap for rubber push button , wire braided lub oil supply hose , set bolt m12x1point75x65 8point8 , nut , circlip 148 , circlip 85 x 3 , copper washer 18x24 , washer copper , washer copper , worm drive hose clip 30mm , hose pipe 1m id 22 nitrile no , spherical brg assembly , main bolt , links , spacer , cap screw position 40 , overload roller , cap screw position 80 , oil pump brgpoint shell , punched joint , punched gasket , fresh water pump dellivery per connection , fuel feed pump del suction conn , sleeve dn32 pn16 , o ring , o ring , plunger spring , o ring an28 , joint for balmo fuel feed pump , fuel feed pump cw engine , rubles compens sleeves dn50 pn16 lf130 , engine over speed pickup , exhaust gas valve stc dn200 , main bolts , overspeed air intlet connection , starting air inlet connection , fuel rack position limiter air inlet connection , thermostat for circulation heater for ktmi opv , screw m 27x2 , 2231 europa actuator with booster , expansion bellow , expansion bellows , avm mounts set , tie rod , o ring , lgc pin lgc g5 8x30 , sealing ring an 13 60c7 , stud , rocker guide , o ring , o ring ms29 513 126 21a7 nse 6point531 , pin for rack bar , link for rack , valve feed , spring , serrated pin , o ring an 49 nse6point5 60c7 , loctite 573 , bpointspointring type c30 nse6point51 20a8 , thermocouple for turbocharger , fuel feed pump , fuel filter element , o ring 162x8 , flexible hose for fuel return , flexible hose for main air start pipe , start electro distributor , k cool super plus 50 50 premix 25 ltr can , k oil 7point5 ltrpointtin , flex hose , spool valve air operated 2 pilots location 15 , glass bulb 28vdc 40 ma set of 10 , set of copper washers , set screw , spring dowel pin , sensor , nozzle fr cpointfilter glacier gf 600 12 , fuel feed pump balmo , rubber compensating sleeve , flex hose dn 32 l 1m , turbocharger , peak pressure indicator , set bolt m30 x 3point5 , flex hose , flex hose , repair kit for gali starter , bearing roller , lt pump assly cw , piston , gasket , gasket , o ring an69 60c7 , o ring an66 60c7 , o ring ms29513 356 60c7 , o ring an61 60c7 , o ring an53 60c7 , o ring an18 21a7 , hexagon bolt , lock washer pair , hexagon bolt , lock washer pair , gasket , o ring ms 29513 228 60c7 , relay , distributor iso electro pneumatic electric , displaying and protection module , socket for pressure sensor or switch , lipped seal , o ring d40point64 t5point33 20a8 , sealing ring simrit b1point16x24x7point21a7 , plug 3 4 bar , needle roller bearing , oil seal for fuel booster pump 16x40x10 , 721 digital control , governor , disc spring washer , pressure regulator 30 7 bars , spointwpointpump onlet low press switch alarm rating to 1point5 bar , pneumatic distributor pneu pneu , pressure transmitter 6 bar 24vdc o p 4 20 ma , bearing temp measure card mtp card , joint , starting air hose assly , injection connection assly for sheathed pipe , injection pipe , lock washer pair , rubber compensator , rubber compensator g0125 x 130 x 016 hks g nbr gr deb , rubber compensator g0080 x 130 x 016 hks g nbr gr deb , rubber compensator g0100 x 130 x 016 hks g nbr gr deb , rubber compensator g0200 x 130 x 016 hks g nbr g
 Loading, Please wait...

Connect us via What's Up