Latest vibro machine Tenders | Government vibro machine Tenders

Central Government / Public Sector

CTN :43226027

19 Jan, 2026 NA

Jagatsinghapur - Odisha

Tender For corrigendum : supply of m/s m/s bently nevada llc make vibration monitoring system for compliance of rtf recomendation and spf recomedation spares at iocl paradip refinery.(r06)

Central Government/Public Sector

CTN :43286687

13 Jan, 2026 NA

Raipur - Chhattisgarh

Tender For corrigendum : biennial rate contract for supply of shinkawa make vibration monitoring system spares

CTN :43400787

15 Jan, 2026 19.7 Thousand

Kutch - Gujarat

Tender For corrigendum : supply of switch inductive proximity unsealed 28v , switch sanp acting sealed single pole , toggle switch pole sealed x20 30 1 , toggle switch 2 pole x20 302 2 , oil filter , anti vibration pad cooling system eng , anti vibration pad cooling system engin , hose 8x 1 mm oil filter , fuel filter power unit , sealing ring

CTN :43474050

15 Jan, 2026 24.83 Lacs

Kota - Rajasthan

Tender For supply of ms shinkawa make spares of turbo supervisory system for unit 3, 4, 5 , 7 of kstps, kota. - relative vibration displacement sensor reverse mount type model no: fl202f08r-m2-r5-03-10, extension cable: 8 meter cable for relative vibration (x&y) displacement sensor model no: fw-202fl-80, driver unit for relative vibration (x&y) displacement sensor model no; fk-202f-2-3-1, absolute vibration velocity sensor shinkawa make model no. cv-861 (0-250 m), extension cable:10 meter cable for absolute vibration velocity sensor model no: fm-cww-extc-010 (4 traid shielded cable), displacement sensor with 1 mtr. cable (lpt / ipt diff. expansion)model no: fl-143f27a-m1-00-05-10, driver, 9m cable system (lpt / ipt diff. expansion)model no :fk-143f-2-3-1, extension cable, 8 meter cable (lpt / ipt diff. expansion)model no: fw-143fa-80

Corporations And Associations And Others

CTN :43499288

15 Jan, 2026 2.98 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at sarita vihar in ward no. 187, central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration ,on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle : should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification : must have valid en certificaton, petrol operated chain sawengine : single cylinder, 2 stroke, aircooled onlydisplacement: 45.4ccpower output : 2.3kw. 3.0 hp max.engine speed (with guide bar & chain ): at least 12500 rpmcarburetor: diaphragm type & compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight( without cutting attachment ): should not be more than 5.0 kgclutch: clutch shoe linining metal only.guide bar design: should be rollomatic type.guide bar length: guide bar length must have 50 cm/20" inch. guide bar and chain: should have same manufacture only.chain type: every drive link require groove & small oil receiver hole for better lubrication. 0.325 inch pitch & 1.6 mm thickness only.chain lubrication system: fully automatic ,speed controlled rotary oil pumpchain oil tank capacity: should be minimum 200 ml.oil pump drive: should have direct drive from crankshaft & oil pump flow adjustable.master lever control: must have all operation in one hand, chock,throttle, acceleration,switch off.guaranteed sound power level: should not be more than115 db(a)maximum chain velocity to iso 11681: should be minimum 28 m/scertification: product should have valid dplf certificate with test standard en iso 11681., tree prunersupply of telescopic pole pruner:-specification:- pole length incuding blade: 6.5m blade material: hardened & tempered high carbon steel .the head of the blade shall have a hooked tip useful for cutting twigs saw blade shape: hooked type curved saw blade type & no of cutting teeth :tripple grounded 86 teeth blade length : 15"-16" pole type: light weight telescopic tubular aluminium alloy extendable pole no of positions for pole height adjustment : 10 positions locking mechanism : ergonomicvally designed two way locking mechanism total working length : max 219"(6623 mm), min 103" (3103mm) branch cutting capacity: 200mm max, lawn mowersupply of lawn mower:-specification:- type of machine walk behind lawn mowerspower source petrol enginestart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 500 to 524minimum cut height 1 millimetermaximum cut height 26 millimeterblades metallicnumber of blades 1number of positions for cut - height adjustment 2number of levers for cut - height adjustment single levernumber of wheels 4front wheel size 200 millimeterrear wheel size 200 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 88 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity - 1 ltr., lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

Corporations And Associations And Others

CTN :43499290

15 Jan, 2026 1.49 Lacs

Delhi - Delhi

Tender For supply of machinery/tools for various parks at pul pehladpur ward no. 179 in central zone - brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hp max output shaft speed at cutting attachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml. weight( dry,without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only. multi function handle: should have acceleration ,on/off switch at right handle. brushcutter harness: should be double shoulder harness only. anti vibration system: must have 4- point aniti vibration system. vibration level in m/s2 at right handle : should not be more than 2.5 m/s2 sound pressure level db(a): should not be more than 105 db(a) drive shaft design: must have drive shaft ends square design type only. certification : must have valid en certificaton, petrol operated pole prunnerengine : single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 cc power output : should be minimum 1.2 hpweight (dry without cutting attachment & fuel ): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capcity (ml): must have minimum 200 ml.clutch : clutch shoe linining should be metal only.guide bar length : minimum 30cm guide bar and chain : should have same manufacture only .chain type : every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max.output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain ( cm ) : should be mimimum 220 cm - compressed & total length of equipment - minimum 350 cm - extended. sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle - extended poistion : should not be more than 5.5 m/s2certification : must have tuv certification with test standard en iso 11680., hedge trimmerengine: 2- stroke - single cylinder air cooled.engine displacement: should be between 20-25 ccpower output: should be minimunm 1 hpfuel tank capacity: minimum 400 mlweight: should not be more than 6.0 kgclutch: clutch linning should be metal only.handle: must have rotating multi-function handleanti vibration system: must have spring loaded technology for anti vibration system design: should have double sided blade with tooth spacing minimum 35mm bar length: minimum 600 mmblade: should have chrome plated -anti corrsion. stroke rate ( l/min): minimum 3000 vibration level m/s2 at right handle: should not be more than 3.5 m/s2.sound pressure level (db..(a)): should not be more than 95certification: should have tuv with en iso 10517:2009, lopperanvil tree branch lopper lade material - high carbon steel with hard surface treatment, overall length - not less than 914 mm handle material - similar materil as per requirement, weight - 1.5 kg., cutting dia - not less than 38mm

CTN :43519553

30 Jan, 2026 NA

Bangalore - Karnataka

Tender For supply of anti vibration equipment housing system

Central Government/Public Sector

CTN :43519643

30 Jan, 2026 NA

Jorhat - Assam

Tender For supply of consumables for construction of hybrid energy device - mild steel sheet, 8ft x 4ft x 1.2 mm, mild steel angle rod, 1.5 inch x 20 ft, mild steel angle rod, 1 inch x 20 ft, mild steel welding rod, diameter: 3.15 mm, mild steel perforated sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 perforated sheet, 8ft x 4ft x 1.2 mm, stainless steel 304 pipe, 1.5 inch dia, 1.5 inch dia, 1.2 mm, 20 ft, zinc alloy door handle lock, stainless steel 304 welding rod, 2.5 mm diameter, ceramic fibre blanket insulation, 24"x12"x1", ceramic fibre rope, 10 mm diameter, 30 m length, heat insulating gasket, 8 ft x 4 ft, 5mm thickness, heat resistant spray paint 225 ml, silicon pipe 1/2 inch inner dia, 10 m, high temperature silicon hose pipe, 2 inch inner dia, 12 feet, worm-drive tubing clamps, chrome steel, hose clamp, 1/2 inch dia, worm-drive tubing clamps, chrome steel, hose clamp, 1 inch dia, worm-drive tubing clamps, chrome steel, hose clamp, 2 inch dia, worm-drive tubing clamps, chrome steel, hose clamp, 3 inch dia, galvanized mild steel set of nut, bolt and washer, 8 mm, diameter, 2 inch length temperature sensor with digital display, k type, 0-1250 c, adruino uno r3 development board, rod heater, 8.2 mm diameter, 12 inch length, quartz furnace observation glass, temperature: 1200 °c, 10 cm diameter, 5 mm thickness, copper tube 1/2 inch dia, 23 swg, copper electric wire 6 sq. mm, 90 m., copper electric wire 2.5 sq. mm, 90 m, mcb dp 32 a, electric socket 16 a, electric plug 16 a, combined box 20 a, anabond gasket maker 85 g, heavy load caster swivel diameter: 100 mm, galvanized iron pipe b class diameter: 1.5 inch, length: 40 ft, galvanized iron pipe b class diameter: 1/2 inch, length: 20, galvanized iron pipe b class diameter: 3/4 inch, length: 20, stainless steel 304 ball valve diameter: 1.5 inch., stainless steel 304 ball valve diameter: 3/4 inch, stainless steel 304 ball valve diameter: 1/2 inch, check valve, brass diameter: 1.5 inch, check valve, brass diameter: 3/4 inch, check valve, brass diameter: 12 inch, metal cutter grinder disc, pack of 10, grit number 220 diameter: 4 inch, grit material. aluminium oxide, metal cutter grinding wheel, pack of 5, grit number 4,, diameter: 4 inch, grit material: aluminium oxide, flap disc, pack of 10, grit number 80, diameter: 4 inch, grit material: aluminium oxide, flexible heavy duty 3 layer pvc water pipe, diameter: inch, length: 30 m, teflon tape for plumbing, pack of 10, 12 mm thick and 10 m length, heat resestant gloves, material. leather, size: 30.48 cm, nitrile disposable hand gloves, pack of 50 pieces, size l, 150 microfarad capacitor, 230 v, 150 microfarad, 230 v, anti vibration rubber ribbed pads, pack of 4, 150mm x 150mm x 12mm, square pillow block bearing ucf204, 20 mm diameter, inner ball mounted pillow block insert bearing kp08, 8 mm bore, step down transformer, 220v ac to 12-0-12 v,1.5a, single strand wire, diameter 0.51mm,5m, moc3021 moc 3021 optocoupler, hta16-600b triac, 600v 16a, switch, sw-spst, in4007 diode, 100kv ia, bldc motor with compatible e-bike, controller, 48v 900w 3300rpm, lithium-ion battery, a grade 3.2v 2000mah (5c), battery management system, li-ion 135 48v 20a, nickel strip, 0.2 mm thickness, 10 mm width, 5 in length., silicon wire, 12awg, insulation paper, 65mm, glue gun, 40 w, spot welding rod 5000 w, cpu fan 12 v dc, thermoelectric generator (teg), 150°c, module configuration: sp1848-27145, tungsten rhenium thermocouple, minimum temperature reading: 0°c, maximum temperature reading: between 2300°c and 2871°c, max31856 instrumentation amplifier, resolution: 0.0078125°c, supply voltage: 3.3v to 5v, arduino uno r3 with adapter cable, miniature circuit breaker fuse, d type, 32 a, power rocker switch, voltage rating: 24 vdc, current rating: 14 ma, 19mm size red power symbol led s.s. momentary type push button switch 5v-24v dc, potentiometers 100 k. ohm, potentiometers 1 m ohm, relay module-(ssr-2 channel), 2 channel

Central Government/Public Sector

CTN :43529134

31 Jan, 2026 NA

Nashik - Maharashtra

Tender For providing of custom bid for services - first year annual maintenance contract comprehensive charges for aron hurley make 6ton electrodynamic vibration system,custom bid for services - second year annual maintenance contract comprehensive charges for aron hurley make 6ton electrodynamic vibration system

Central Government And Public Sector

CTN :43547599

27 Jan, 2026 4.70 Lacs

Mumbai - Maharashtra

Tender For providing of customized amc/cmc for pre-owned products - vibration system; saraswati dynamics pvt ltd; annual maintenance contract (amc); six-monthly; yes

Vibro Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Corporations And Associations And Others

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector