Vibro Screen Tenders

Get complete information related to latest Vibro Screen Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Vibro Screen Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Vibro Screen Tenders .

Filter

Loading....

Get Tender in Email

CTN :40405363

30 May, 2025 12.20 Crore

Netanar - Chhattisgarh

Tender For custom bid for services - operation and maintenance of mobile equipment at nsl for a period of 01 year in 3 mtpa isp at nagarnar near jagdalpur, chhattisgarh state-nmdc steel limited has setup up a 3.0 mtpa integrated steel plant at nagarnar, chhattisgarh with coke oven, sinter plant, blast furnace, steel melting shop, thin slab caster, hot strip mill route and other auxiliary units- 2. contractor s scope of work/supply/responsibility: brief description of scope of work (not limited to) needs to be carried out by successful bidder 1. to carry out operation of mobile equipment as mentioned in annexure a by deputing skilled, qualified and experienced manpower. 2. to carry out maintenance of mobile equipment as mentioned in annexure b by deputing skilled, qualified and experienced manpower. 3. to maintain and operate the effluent treatment plant specially made for fmd as per environmental norms. 4. deployment of at-least the prescribed minimum strength of experienced manpower as indicated in clause no. 5.0 to successfully execute the operation & maintenance activities, with a provision to keep reserve in each manpower-category (if required) to meet the minimum daily requirement for round the clock operation and maintenance. 5. all the tools tackles and special tools including diagnostic tools like: mechanic tools, electrician tools, welder tools, tyre fitter tools, special tools, lifting tools, hydraulic pressure testing kit etc. required for operation & maintenance and repair of mobile equipment is in bidder s scope. separate tools should be available for site maintenance team and shop floor team. all tools and tackles should be tested and certified by third party. 6. all the shift personnel will report to respective shift supervisor of the successful bidder administratively. the shift supervisor shall be decided by bidder in consultation with nsl. bidder shall organize all the jobs of o&m with the help of their supervisors/ engineer and they shall coordinate continuously with nsl to carry out the operation and maintenance activities. 7. operation and maintenance of mobile equipment shall be carried out on 24 x 7 basis including sundays and holidays on a shift-wise basis (four shifts [a, b, c & g]. i. for operation: 1.operation of all the equipment will be in all shifts as and when required as listed in annexure a. 2.inspection report of vehicle will be prepared by bidder and approval of the same will be obtained from nsl. a.preventive maintenance: 1. checking/ adding/ replacing engine oil, hydraulic oil, brake oil, def level etc.; 2. checking and cleaning oil filter; 3. checking and adding/replacing engine coolant as the case may be; 4. checking fuel level and adding fuel if required; 5. checking and cleaning of fuel and air filters; 6. checking hydraulic filters, hoses, seal, o-ring etc.; 7. checking electrical switches, relay, fuse, bulb etc.; 8. battery charge level checking and charging & battery maintenance/cleaning; 9. checking all the safety devices like back horn, seat belt, camera, beacon light etc.; 10. check air pressure in tyre and check wheel nut tightness; 11. checking and adjustment of transmission, alternator and other belts and chain drive; 12. cleaning and washing of the vehicles; 13. maintaining good housekeeping of washing ram; 14. cleaning of operator/driver cabin; 15. greasing in all points; 16. apply cardium compound on wire rope/crane rope; 17. any other activity as required. b. periodic maintenance 1. engine oil change; 2. replacing fuel filter; 3. replacing oil filter; 4. changing of air filter kit; 5. change of steering filter; 6. gear box oil change; 7. rear axle oil change; 8. power steering oil change; 9. replacement of coolant; 10. carrying out tyre inflation and repair; 11. welding and gas cutting works; 12. housekeeping work of the repair shop; 13. cleaning and washing of the vehicles. c.breakdown maintenance: in case of breakdown of any mobile equipment as listed in annexure

Central Government / Public Sector

CTN :39266869

22 May, 2025 2.04 Crore

Jagatsinghapur - Odisha

Tender For bid to ras corrigendum : custom bid for services - pdm1b24334 agency for hydro testing and ibr liaison during repair maintenance schedule testing of boilers hrsg ibr exchanger ibr vessels and other ibr equipment for power plant and other units of refinery during normal operation and shutdown-1) carbon steel piping for hydrocarbon services (with welding electrode e-6010 / e-7018) - units transportation of all piping items from owner's storage points to work site and / or pre-fabrication yard and to site after pre-fabrication; cutting, grinding, edge preparation of pipes and fittings, like flanges, elbows, tees, reducers etc. to match the mating edges of different thickness; fit-up, bending, welding using approved welding electrodes as per owners quality requirements etc. as per codes/specifications, drawing etc., threading, laying, erection and alignment of pipes upto a height of 5 meters on sleepers, pipe racks etc. or upto 5 meters depth in trenches, anchoring wherever required, connecting with equipment, nozzles, steam traps, strainers, orifice assemblies (including tapping upto first block valve), spray nozzles, rotameters; tapping for instrument connections like pressure gauges, thermowells, sample connections, vents, drains etc. including fixing of all types of sw valves, gaskets, nuts and bolts, all inline instruments, elbows, tees, flanges, reducers, full coupling or half coupling, reinforcement pads, earthing strip wherever required; welding prefabricated shoes and supports (including alignment) as per the drawings including preparation of small bore isometrics upto 1.5 inch nb, specifications, codes etc. and as per the instructions of the engineer-in-charge to his entire satisfaction. the scope also includes supplying of all types of tools and tackles, lifting arrangements, equipment, machineries, all consumables and labour etc. to complete the work in all respects including area preparation for hot jobs, area cleaning after completion of work, flushing wherever required, cleaning of pipes externally off all foreign materials like weld beads, clamps fixtures etc. used in fabrication as directed by the engineer-in-charge., 2) provision of reinforcement pad (with welding electrode e-6010 / e-7018) transportation from owner's storage points to work site and/ or pre-fabrication yard and to site after pre-fabrication; cutting, gri nding, edge preparation as per the instructions of the engineer-in-charge to his entire satisfaction. the scope also includes supplying of all types of tools and tackles, lifting arrangements, equipment, machineries, all consumables and labour etc. to complete the work in all respects including area preparation for hot jobs, area cleaning after completion of work, pneumatic testing, cleaning of pipes externally off all foreign materials like weld beads, clamps fixtures etc. used in fabrication as directed by the engineer-in-charge. 3) extra for ibr grade carbon steel piping joints. for ibr piping jobs, the scope of contractor shall be liasoning with ibr authorities including approval of drawings / documents from ibr authorities and also getting the final approval of the job from ibr authorities including payment of any fee or charges to ibr authorities for this purpose (20% of joints). 4) alloy steel piping (astm a335 gr. p22) units- transportation of all piping items from owner's storage points to work site and/ or pre-fabrication yard and to site after pre-fabrication; cutting, grinding, edge preparation of pipes and fittings, like flanges, elbows, tees, reducers etc. to match the mating edges of different thickness; fit-up, bending, welding using approved welding electrodes as per owners quality requirements etc. as per codes/specifications, drawings etc. (alloy steel joints shall be welded by doing root run using tig welding followed by filler passes by manual / semi-automatic arc welding. the job is to be pre-heated prior to welding and all joints to be stress relieved and fully radiographed

Central Government/Public Sector

CTN :40335379

02 Jun, 2025 12.15 Lacs

Kollam - Kerala

Tender For vibro motor for weir make enduron sd12x36 vibro screen

CTN :40196497

22 May, 2025 3.00 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of rubber goods items - rubber strip for dorr scrapper as per our drg.no.b-38/82 enclosed. , rubber sheet for juice heater double beat valve as per our drg.no.101/90 , enclosed sore hardness 60-65. , discharge valve rubber seat for pan no.4 & 7 as per our drg.no.b 21/81r , rubber strip for c/f. m/c of size width - 70mm, thickness, 6mm , rubber seat for main hole drg. no. b-68/86 , rubbber bush as per drg. no. 25/82 dholak type , 18.25mmidx40mmodx35mm long. , rubbber hose pipe for vacuum filter id 2-1/2"xlengtyh 1-1/2". , rubber taper plug fore evaporator tubes plugging sutiable for 42/45 m.m. , tubes , rubber taper plug fore evaporator tubes plugging sutiable for 39/42 m.m. , tubes , rubber taper plug fore evaporator tubes plugging sutiable for 98/102 m.m. , tubes , rubber seat for quad man hole as per drg.no. b-209/2000 , #name? , rubber seat for pan condensor as per skech no.b/248/2012 , rubber seat for pan condensor as per spary box strainer skech no.479/24 , rubber seat for pan main hole as per skech no. b/272/2003 for pan , no.01,03,05,06 & 07 (5 nos) , rubber seat for exhaust valve of pan no.2 vapour cell & semi kestner as per , drg. no.b294/2005. , rubber star for star coupling sl-100 of p.g. drive , rubber buffer for lever support of juice weighing scale drg. b-79/88 , rubber seat for juice weighing scale drg. b-85/89r , rubber seat for condenser drg b-348/2012 , water weighing scale valve rubber sheet drg. no. kcsf 154/85 , rubber coupling for sugar grader , telescopic value rubber seat as per drg. b111a/91 , rubber sheet for water weighing scale ( top & bottom) drg. b-354/2014 , & 366/2015 , mud seal for clarifier as per drg. no 71/82 r1 , rubber strip for vibro screen as per sample , neop rubber bucket with m.s. plate as per sample big size , rubber o' ring size 362x4mm , do but size 188x6mm , do but size 217x6 mm , rubber screwzzer for clearifier 30"x3"x3/4" , rubber bush for cane leveler as per drg no m-6/81 r , rubber tyre complete tc-10 , rubber tyre tc-10 , rubber tyre ph-116 , rubber spare tyre for c/f m/c as per sample tc-022 , mill hydraulic bucket size 303/300mm as per drg no kcsf 359/2018 , hardness 85-90 0 , rubber strip 75mm(width)6mm thick , rubber strip 50mm( width) x5mm thick , rubber ( as per sample) nk-1100 c/f machine , tyre coupling complete tc-11 , rubber tyre coupling spare tyre tc-013 , rubber strip as per drg & as per sample dynamic juice heater , neoprone rubber strip or semikesner as per sample , neoprone rubber seat 335x200x20 , rubber seat ( 550x400x25mm) , rubber seat ( 600x450x25mm) , rubber seat ( 900x750x25mm) , rubber seat ( 950x800x25mm) , neoprene rubber strip for nk-1100 c/f m/c as per sample , neoprene rubber strip for nk-1500 c/f m/c as per sample , neoprene rubber strip for nk-1350 c/f m/c as per sample , rubber sheet for 3 angle valve as per drg. 420/2021 , rubber sheet for 4 angle valve as per drg. 420/2021 , rubber sheet for 6 angle valve as per drg. 420/2021 , rubber seat ( 650x500x25mm) , rubber star l-75 , rubber mud seas as per sample , rubber seat for main hole size 540x425x20mm , rubber seat for main hole size 550x440x20mm , rubber seat for main hole size 540x440x20mm , rubber seat for main hole size 340x200x25mm , rubber seat for pan pneumatic cut over valve size 8 puri make for pan , no.05/06 & 08 ( 210x135x20mm) , rubber seat for pan pneumatci cut over valve size 10 puri make for pan , no.01/02 & 03( 265x175x20mm) , rubber seat for pan pneumatic discharge valve size 20 ( puri make) for , pan no.02/05 & 8( 550x430x22mm) , rubber seat for pan pneumatic discharge valve size 24 ( puri make) for , pan no.01 & 03 ( 655x490x25mm) , tyre for coupling t.c 0-20 , tyre for coupling t.c 120 , rubber sheet size 235x30x12 mm thik. for all j.h double beat valve and , glove valve , rubber sheet for man hole 530x430x25mm thik. , rubber sheet 850x730x25mm thik. for ezehaust valve of s.k x v.c m.o.cs. , b.r , canvas belt 8 ply width 6" tot

Loading, Please wait...

Vibro Screen Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector