Latest video door phone Tenders | Government video door phone Tenders

Central Government/Public Sector

CTN :45376467

29 Jun, 2026 30.00 Lacs

Bikaner - Rajasthan

Tender For corrigendum : repair and comprehensive maintenance of swimming pool plant and equipments fire fighting system at af stn nal under ge (af) nal - comprehensive annual maintenance of swimming pool comprises of the following equipments complete all as specified and directed.(a) pumping sets of capacity 3.5 hp - 05 nos (01 as standby) (b) pressure filter of filtering capacity 50 cum/hr - 04 nos (01 as standby)(c) dosing pump - 02 nos (one for chlorination and one for soda ash)(d) electrical panel board consisting of starters of suitable rating complete.note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit swimming pool once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of swimming pool.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account. (iii) cleaning all swimming pool building inside, plant room, equipments including surrounding area of the buildings. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of 3.5hp / 3.26 kw capacity and all other connected items., comprehensive annual maintenance of fire fighting system in sekhon hall , new tech flight, sre and new atc of the following equipments complete all as specified and directed.(a) main fire pump with centrifugal motor of existing capacity- 04 nos (b) jockey fire pump with electric motor of existing capacity - 04 nos (c) makeup fire pump- 04 nos(d) dg fire pump with engine - 04 nos note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit fire fighting installation in sekhon hall , new tech flight and new atc once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of installation.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account.(iii) cleaning all fire fighting installation buildings (sekhon hall , new tech flight and new atc) inside, plant room,equipments including surrounding area of the building. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of all existing capacity and all other connected items., s&f in repair pressure pump limit switch of capacity 1psi to 4 psi and 230 volt as per existing make and model fixed on pressure booster line complete all as specified and directed., supply, installation, testing and commissioning in repair of detectors complying with and type certified to en-45 addressable type multi sensor detector with heat and smoke combination with base with self built intelligence as per is:11360 (for annexes) complete all as specified and directed., supply, installation, testing and commissioning in repair of addressable manual call point / pill station resettable type with base complete all as specified and directed, supply, installation, testing and commissioning in repair of fire alarm sounder/siren electronic type horizontal single stage continuous type normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 mtr with sound output variation +5 db 500 mtr complete all as specified and directed, supply and fixing in repair addressable monitor module for activating the sirens complete all as specified and directed, taking out old unserviceable hose box by cutting and welding and s&f hose box made of 18 gauge ms sheet 800mmx 600 mm x 250 mm with double door with 4 mm thick glasses and door frame made of 16 gauge ms sheet for keeping 2 nos hose pipe of length 15 mtr each branch pipe nozzle coupling etc and painted fire red out side and brilliant white inside yard complete all as specified and dire

Central Government/Public Sector

CTN :45422770

07 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : supply of fire detection unit sensor filter type lfawm3100v generally conforming to clw specification no. clw/es/3/0057. [ warranty period: 30 months after the date of delivery ] ]

CTN :45557570

25 Jun, 2026 NA

Bharatpur - Rajasthan

Tender For supply of amc for 03 no fire engine , amc for 400 kva d g set , amc for 250 kva d g set , amc for 125 kva d g set , amc for 160 kva d g set , breakdown visit , anabond , lub oil filter 232v12 , element pre fuel filter , element micro fuel filter , fuel pre fltr kf 5 0ltr , outer element , element to air filter , gasket, rocker cover , o ring sprs , spinon assembly kit , cogged belt ax49 1258l , v belt sbp x 1600 , lub oil filter 234 , gasket rocker cover , gasket , intrmdt flngd bellow , lub oil pump , greaves lub oil ci4 plus50ltr pack , set of o rings tbd3v12 rc , set of gaskets tbd3v12rc , set of gaskets 12v14tag rc , gasket cylinder head , set of hoses 12v14tag rc , set of hoses tbd3v12 he , set of copper joints , set of hose clips , d4 flex pipe set , set hp fuel pipes tbd3v6 , thermostat 75degree centi , greaves additive 5 , radiator pre mix greaves kool , intake manifold , flex pipe hose 500mm l , adaptor for injection , hexbolt m10x1 5x180 , flex fuel pipe 1000mm byl , hose 63 5idx65 l , hose clip 32 50 by2a , relay card 24vdc,70a str bystp , battery charger 24vdc,10a nhp , engine control panel , lube oil press sensor , oil and water temp sensor , pressure switch , twintech temp switch 1 by 2 bsp , cu washer , adj screw m10x1 5x39 lg , hex nut 5 by8 std , lot gauge 40 by130deg 2445l , a v mountg a2t by4030b , 24v relay box assembly , wtr sep with priming , oil seal flywheel side , repair kit j92 china , water pump with flange , set of hose clips tbd2v12 , set of sealing rings , exh sleeve ggg simo51 , cap screw m10x115 din 912 , a v mountg avd by1515a , w t gauge 1380mmt capil , liftg magnet d by234 , pinion bandex , relay base , t joint nozzle pipe , t joint return pipe , fuel flexible pipe 6ft , fuel flexible pipe 5ft , champion abestos cloth by dori in kg , air intake gasket , gasket water liner byair line , battery lug cover black byred , battery cable lug negative bypositive , solenoide switch 24v , gun mattel bush , clutch assembly , carbon bush set , self starter overhuling , work shop by lathe machine , work shop for armature refinish , flexible pipe 10 fit overflow , doul magnetic pickup

CTN :45370610

16 Jun, 2026 NA

Kargil - Jammu And Kashmir

Tender For bid to ras supply of mcb double pole 32 amps , mcb double pole 16 amps , mcb single pole 6 amps , switch socket combination 5 pin 15 amps , switch socket combination 5 pin 5 amps , tube light led 1200mm 20w , tube light 10w , led bulbs 20w , led bulbs 9w , cgi sheet 8ft x 3ft , aluminium door handle 150mm , aluminium hydraulic door closers , ply wood 3 ft x 6 ft 8mm , ply wood 6 ft x 4 ft 8mm , cp bib cock 15mm , sand bags , indian type toilet seat steel , keroheater 22 g wicks , keroheater 33 g wicks , 1.5 sq mm electric wire , 2.5 sq mm electric wire , switch socket comb 16 amp , 2 core wire , bib cock , fire ball , fire extinguisher 02 kg , stop cock , mirror , m seal , insulation tap , battery 12v 150ah for aerial cableway , angle holder , pvc cashing caping 6ft 25mm , pvc cashing caping 6ft 32mm , nails 4 inch 3 inc 2 inch , aluminium door handle 150mm size , aluminium door stopper , aluminium hydraulic door closer , cp bib cock 15mm dia , cp angle cock , pvc waste pipe 32mm dia for wash basin , pvc connection 15mm dia 600mm long , white cement , water stopper for tanks , hesco basket , switch 6 amp , switch 16 amp , tapping screw 2.5 inch , cp angle cock , tiles 600mm x 600mm , tiles 1 ft x 1 ft , western wc , wash bashin , tap , flushing cistern , celing light , health faucet , wc seat cover , sparking plug , rope medium , sensor wire 3kva honda , whully accessory 3 kva honda , carburator , ignition coil , oil filter , fuel filter , fan belt , piston k2 , piston petrol , fuel pipe , wall assembly , pressure glass , on and off switch , fuel injector pump gen set 10 kva , fuel pump gen set 10 kva * /bid number : gem/2026/b/7601109 + /dated: 30-05-2026 ' ' / bid document 1 / 48

Central Government / Public Sector

CTN :45548916

25 Jun, 2026 NA

Hyderabad-T - Telangana

Tender For supply of 3.5 digit backlit lcd hand held true rms clamp meter. specification : voltage (0-1000v) ac/dc, current (0-1000 a) ac/dc with overload protection for all ranges, data hold, fire proof heavy duty current sensor+hall effect sensor resistance range : 400 ohm- 40 mega ohm kilo ohm, continuity tester, capacitance range : 50nf to 100uf, duty cycle - range : 1% to 99%, resolution : 0.1%, accuracy : + 1% + 5dgt, overload protection : 1000 v ac/dc, 9v battery type 6f22, 1 probe set,1 instruction manual/warranty card, 1 clamp carrying case,2 battery, 2 crocodile clips. [ warranty period: 30 months after the date of delivery ] ]

CTN :45516801

02 Jul, 2026 NA

Pune - Maharashtra

Tender For ravel re 102 zone conventional fire panel , system sensor p2 rled sounder cum flasher , mcp 2a r470sf 01 kac manual call point , mcp protector , auto dialer , polycab 2 core 1.5sqmm armoured cable , exide 12v 07ah battery , preparation of locations 11 for installation of wireless fire alarm system , fitment of manual call point 11 and control panel 11 , setting up of centralised monitoring station at fire station and guard room

CTN :45516522

22 Jun, 2026 NA

Kanpur - Uttar Pradesh

Tender For temp sensor 120 deg , sensor for etg 24v , inst charges sensors , vibration sensor wit , data concentrator , field mounted led dis , advance portal software , inst and comm. , sitc fire engine digital display , sitc media converter , patch code , nflp pressure transmitter , level switch fuel tank , supply and install of level switch press transmitter , 6 core ofc , 2c x 1.5 sq mm cu conductor cable , 1p x 1.5sqmm cu conductor cable , laying of control cable , sup 1.5 sqmm 24 c armoured cable , sup of armoured cat6 , shielded cable

CTN :45024279

13 Jun, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For bid to ras supply of replacement of defective or senseless with compatible multi sensor smoke detector , xipe cross linked polythene thermostatic cable cable multi core , laying charges for cable including fire proof pipe , compatible addressable manual call point , compatible addressable sounder and strobe , online power backup source 1000va 60min 4 no 62 ah battery , addressable panel external surge supply with spd integration including 0.2 ohm rapid release surge cancellation device including wiring , installation and configuration , fire bell with manual call point including installation and electrical socket with wiring , annual maintenance contract for existing infrastructure of afds for 03 panel and allied equipment

CTN :45499275

20 Jun, 2026 NA

Jalandhar - Punjab

Tender For supply of light bar assy complete for truck fire fighting , siren amplifier for truck fire fighting , black out change over switch , repair kit mechanical transmission , wind shield glass with sensor

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

Video Door Phone Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector