Web Analytics Made Easy - StatCounter

Video Shooting Tenders

Get complete information related to latest Video Shooting Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Video Shooting Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Video Shooting Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

corporations/Associations/Others

CTN :45276552 Due date: 01 Jun, 202601 Jun, 2026 63.50 Lacs
Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f

corporations/Associations/Others

CTN :45278994 Due date: 01 Jun, 202601 Jun, 2026 63.50 Lacs
Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g

Central Government And Public Sector

CTN :44687431 Due date: 25 May, 202625 May, 2026 NA
Tender For bid to ras corrigendum : tender for supply of calibration of aviation standard tools and equipments : : - battery charger alpha c20/25 , battery charger alpha c20/25 , battery discharger bc 5000 , battery discharger bc 5000 , multimeter fluke 179 , torque wrench 5-35 nm , dc power supply l-3230 , ramp tester ifr-6000 , torque screw driver a402 (0.5- 2.5 nm) , carbon monooxide meter s/n- 211222325 , combination set , combination set 0-360 degree , compass landing (sirs/189/188) , d t i digital gauge 0-10 mm , d t i gauge 0-10 mm , depth gauge 0-150 mm , digital multimeter metravi 19 , digital protactor 0-90 degree , feeler gauge , feeler gauge 0.03-1 mm , force gauge 0-200 lbf , force gauge digital , hi voltage cable tester , hole gauge , micrometer digital 0-25 mm , micrometer external 0-150 mm , micrometer inside 0-1mm , micrometer inside 0-25 mm , pressure gauge 200 psi , pressure gauge , pressure gauge , pressure gauge 0-1000 psi , pressure gauge 0-150 psi , pressure gauge 0-150 psi , pressure gauge 0-250 psi , pressure gauge 0-500 psi , pressure gauge 0-6000 psi , pressure gauge 0-6000 psi , pressure gaugte 0 - 1000 psi- n2 kit , spirit level ts/94/2 (300 mm) , spring balance 0-50 kg , stop watch analog , straight edge , surface plate 18 inchx18 inch , telescopic gauge 12 to 54 mm , torqe screw driver 2-8 nm , torqe screw driver new capri , torque wrench , torque wrench , torque wrench 20-100 lb-ft , torque wrench 2-14 nm , torque wrench 5.6 23.7 nm , torque wrench 5-35 nm , torque wrench 5-35 nm , type pressure gauge digitel 150 psi , tyre pressure gauge 0-12 kg , tyre pressure gauge 0-200psi , pressure gauge 0-250 psi , pressure gauge 17.5 kg (spark plug tester) , volt meter , digital thermohygrometer , digital weighing balance , digital thermohygrometer , air compressor capacity 50 liter , air compressor capacity 50 liter , air compressor capacity 30 liter , air compressor capacity 30 liter , lifting beam (engine sling) , mobile crane with 10 mm wire rope , chain pully with mono rail , chain pully with mono rail , chain pully with mono rail , chain sling 4 leg 8 mm link dia , mobile crane with 12 mm link chain

CTN :45292055 Due date: 01 Jun, 202601 Jun, 2026 NA
Tender For supply of integrated dynamic fitness nexus hr pipe , adjustable hip thrust 360 degree , cable cross , 45 degree leg press , hack squat , heavy standing punching bag , gymnastic mat , deadlift platform , full length gym mirror , rubber flooring zig zag

CTN :45276282 Due date: 03 Jul, 202603 Jul, 2026 12.73 Lacs
Tender For purchase of lab equipments - lab equipments, steel ceramic centre wire gauze (150x150mm ) (15x15cm), glucometer strip for one touch glucometer, rubber teats bulb type medium size, blood lancet - plastic, tripod stand : stainless steel (grade 304/1.4301, height 20 cm, 6 ring top), laboratory centre, hot plate digital, with magnetic stirrer 150 degree celsius / 302 degree fahrenheit, 100-1800 rpm, 2l capacity, 110v support stand, stir bar reriver temperature probe sensor digital rpm, timer digital timer and magnetic countdown, china dish (3 to 4 inch size), whatman no.1 filter paper (90 mm circle) 100 circles/pkt, ordinary filter paper 500 sheet / bundle (46cmx57cm), capillary tube - plain glass, non-heparinized, soft, thinwalled glass, easy to snap, length 7-10 cm, 1 mm internal diameter (200 nos/pkt) to test clotting time, haemocytometer coverslip i.e, (counting chamber has cover glass) blue star 20x25 mm no:4, english glass 20 nos/pkt, haemocytometer standard tube (round only), haemoglobinometer pipette spare 20 micro litre with rubber tube at the end, rbc pipette with marking and rubber tube at the end, wbc pipette with rubber tubes at the end, wintrobe s haematocrit tube (graduated), spirometer (portable type - compact), counting chamber (german made improved neubar). marked area should be in a mercurial background, haemocytometer set (high quality set), haemoglobinometer set including comparator std, hb tube, dropper, glass rod, w/10 hcl, brush rubber tubing with mouth part etc. (better quality set), hand grip dynamo meter material plastic, steel, electronic components lxwxh (2.4x4.1x16) style wrap, shape oval, measures upto 198 lbs (90kg) with high precision sensor for reliable results. clear lcd display shows user profile, strength level and progress tracking andeasy to read format, adjustible hand grip customizable grip size ensures a comfortable fit for all hand sizes and age of groups, long lasting perfomance with auto power off to save battery life., perimeter for laboratory liser type, mild steel (material) black coloured, dimension 350x190x170 mm (standard model), stopwatch ordinary mechanical (70x50x16cm) wt 120 gm manual winding, tuning forks to test hearing 32 hz steel model, better quality, tuning forks to test hearing 10,000hz steel model, better quality, ph meter : table top for professional laboratory ph/mv meter, 0.01 resolution +- 0.05% accuracy, research upgrade instrument, automatically identify standard buffer solution, ph 4.00, ph 7.00 and ph 10.1, user friendly, lcd display, ideal for laboratory, educational purpose, suitable for environment range from 10 degree celcius to 50 degree celcius, ph meter complete kit included comes ph meter, ph electrode, temperature sensor stand, 3 standard buffer solution, user manual for ready to use out of the box, dissection completion set - full instruments, led lamp for microcsope with variable light intensity control (substage), 1/2 circle cutting suture needle with eye, sthethoscope, bp apparatus, specimen jars (glass jar with lid) 10 inch x 6 inch x 4 inch (acrylic), specimen jars (glass jar with lid) 12 inch x 6 inch x 6 inch (acrylic), specimen jars (glass jar with lid) 4 inch x 2 inch x2 inch (acrylic), laminar airflow cabinet (vertical) stainless steel work table : filtration hepa filter, power supply 220 v, digital kitchen weighing scale with lcd display 10kgx1g precision, comparison microscope for fingerprint, x-ray view box one in four led illumination, disposable cusco s speculum-sterile clear acrilic/plastic smooth finish with silent side locking screw (s - 10, m - 10, l-10), gynaecological examinaion light led cold light source (1500 lux) 360 flexible goose neck, mobile s caster base 4500k lamb, iron / stainless steel mortar &pestle (12.5 cm diameter), tincture press stainless steel - 1l, colorimeter (digital, 400-700 nm), electric triturator, electronic balance ac aaa battery operated d = 0.01g, max : 500g, hot air oven 25l, tlc spray bottle with

CTN :45279642 Due date: 01 Jun, 202601 Jun, 2026 NA
Tender For supply of ahuja cordless mike amw700 uhl , gmb6c 601lmg ahuja , dash camera , white alkosign board size 2ft x 3ft , white alkosign board size 4ft x 3ft , white alkosign board size 4ft x 5ft , double head led table lamp 360 degree , notice board size 2ft x 3ft

CTN :45260282 Due date: 30 May, 202630 May, 2026 NA
Tender For supply of haemoclip for gi endoscopy 360 degree rotatable 235 cm length, 16 mm wide jaw

CTN :45260817 Due date: 30 May, 202630 May, 2026 NA
Tender For supply of haemoclip for gi endoscopy 360 degree rotatable 235 cm length, 11 mm wide jaw

Central Government/Public Sector

CTN :45264915 Due date: 10 Jun, 202610 Jun, 2026 22.99 Lacs
Tender For tender for supply of glf spares at gaya ji airport -supply of 200w 6.6a bi-pin halogen lamps for runway edge light cat no. 64386 osram.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 105w 6.6a bi-pin halogen lamps cat no. 64339a osram.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 105w 6.6a bi-pin halogen lamps cat no. 64339b osram.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 200w 6.6 a halogen lamps osram cat no. 64382 hlx-a 200w-15 6.6a pk30d.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make bi-pin lamp holder suitable for 200w , 6.6 a halogen lamp as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 45 watt , 6.6 amp bi-pin halogen lamp suitable for taxiway edge light fitting. bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 200 w 6.6/6.6a , 5 kv rating isolating transformer.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 16 sqmm 5 kv grade plug and receptacle.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of 6 sqmm 5 kv grade plug and receptacle.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of industrial type electronic siren.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of driver unit vardhman make taxiway led fitting.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of vardhman make 360 degrees blue lens for taxiway fitting.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make 360 degree outer clear lens for runway fitting complete as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make 360 degree inner clear lens for runway fitting complete as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make 180 degree red filter for runway fitting complete as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make 180 degree yellow filter for runway fitting complete as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of ama make 180 degree clear filter for runway fitting complete as required.bidders are advised to refer complete bid document including technical specifications , special conditions of contract and detailed boq before quoting rates. , supply of red filt

Central Government/Public Sector

CTN :45270825 Due date: 29 May, 202629 May, 2026 NA
Tender For fast fix 360 degree meniscal repair kit with 2 threads. the firm should supply whole acl set and instrumentation and all range of implant at the time of surgery. (asper detailed specifications attached) [ warranty period: 30 months after the date of delivery ] ]
 Loading, Please wait...

Connect us via What's Up