Viscose Fiber Tenders

Get complete information related to latest Viscose Fiber Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Viscose Fiber Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Viscose Fiber Tenders .

Filter

Loading....

Get Tender in Email

CTN :40373111

29 May, 2025 4.96 Crore

Guwahati - Assam

Tender For procurement of flood fighting materials (geo-textile bags type-a and geo-textile bags type-c ) for water resources department. (for dhubri wrd) (ph-iii ) - supply of geo-textile bags of type-a (1.03 0.70 m) inner to inner made of geo-textile non-woven fabric sheets of 400 gsm manufactured from 100% virgin polypropylene (pp) fibre with minimum properties as per is 16653:2017 i. wide tensile strength (md) 20kn/m & wide tensile strength(cd) 20 kn/m ii. elongation (md) 50% & elongation (cd) 50% iii. abrasion 95% iv. trapezoidal tear strength (md) 450n & trapezoidal tear strength (cd) 450n v. cbr puncture strength 4000n vi. permittivity 1.10s 1 vii. permeability 40l/m2/sec viii. aos 75 micron ix. uv resistance @ 500 hours retained tensile strength (md) & (cd) 80% x. mass 400 gm/m xi. thickness at 2kpa 3 mm xii. seam strength 80 % of actual fabric strength. stitching of bags should be ring spun yarn stitches with 2500-3000 denier double line chain stitch with overlap with stitches along the edge @ minimum 15 stitches per 100 mm. (bags are to be supplied of 100 numbers in a bundle, properly packed with each bag having proper tag with name of manufacturer, batch number, the gsm and type of polymer encrypted and stitched on top corner and each bag is to be marked with wrd govt. of assam to be printed distinctly. test certificate from approved nabl accredited and iso (certified laboratory should invariably be submitted against each batch of material), supply of geo-textile bags, type c of size 1.50 m 1.00 m, inner dimension made of composite layers of geo-textile as per specifications below:woven geo-textile for the outer cover. the woven geo textile is woven with uv resistant slit film tape fibre with mavr values of the following properties. geo-textile used to manufacture geo-textile bags should have high mechanical properties for enhanced durability along with enhanced puncture, abrasion and u.v. resistance characteristics. geo-textile should be inert to biological degradation and resistant to naturally encountered chemicals, alkalis, and acids. weight (iso-9864/astmd 5261) 250 gms/sqm. tensile strength (md) (astmd 4595) 35 kn/m. tensile strength (cd) (astmd 4595) 35 kn/m. tensile elongation (astmd 4595) 5% & 30%. grab elongation (astmd 4632) 5% & 30%. tensile strength (astmd 4632) = 1.5 kn. uv resistance (astmd 4355) = 70%/500 hrs.non-woven geo-textile for the inner layer. it is needle punched non-woven geo-textile made of 100% polypropylene staple fibers which are formed into a random network for dimensional stability. it should resist uv degradation, rotting and alkalis. weight (iso-9864/astmd 5261) 300 gms/sqm. tensile strength (md) (astmd 4595) 12 kn/m tensile strength (cd) (astmd 4595) 12 kn/m tensile elongation (astmd 4595) 5% & 30% grab elongation (astmd 4632) 5% & 30% tensile strength (astmd 4632) = 1.5 kn uv resistance (astmd 4355) = 70%/500 hrs(bags are to be supplied of 100 numbers or part in a bundle, properly packed with name of manufacturer and batch number is to be marked on each bag with wrd govt. of assam to be printed on each bag and mentioning properly the gsm and type of geo bag polymer. test certificate from approved nabl accredited and iso certified laboratory should invariably be submitted against each batch of material)

Central Government And Public Sector

CTN :40437004

31 May, 2025 NA

Kapurthala - Punjab

Tender For supply and installation of office furniture for different locations of ihb up state - executive table with pedestaloverall size executive table top 25 mm ppb , 0.6 mm thick post formed laminate , 1 mm thick bdl , 2 mm pvc , modesty 18 mm thick ppb , clad 1.0 mm dl size : 1800 w x 900 d x 740 h size shall be 1800 width mm x 900 depth mm x 740 height mm .table top shall be 25 mm thick plain particle board (ppb) clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .flat edge duly sealed with 2 mm thick pvc beading. the modesty shall be 18 mm thick plain particle board ( ) ppb clad with 1.0 mm thick decorative laminate (dl) on both sides. edge sealed with 2 mm thick pvc beading. with standard size pedestal, executive chairoverall size mid back back: 47.7 cm. (w) x 60.1 cm. (d), seat: 47.0 cm. (w) x 48.0 cm. (d)overall dimensions of chair seat height -43.1-53.1cm height -96.5-114.0.cm. width & depth of chair as measured from base - width-76.1 cm and depth-76.1 cm 1) seat assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience (hr) polyurethane foam of density 45 2 kg/m3,and hardness load 16 2 kgf as per is:7888 for 25% compression. seat size : 47.0 cm. (w) x 48.0 cm. (d) 2) back assembly: the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9 0.03cm x 0.16 0.0128cm. it upholstered with leatherette.(d) *mid back size: 47.7 cm. (w) x 60.1 cm. (d) 3) armrests (fu3301/fu3302) : the armrest top should be moulded from polyurethane(pu) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81 0.03 cm x 0.2 0.01 cm thk m.s. e.r.w tube having chrome plated finish. the armrest height adjustable up to 6.5 0.5cm in 5 steps. 4) active bio-synchro mechanism (fu3301/fu3302): the adjustable tilting mechanism should be designed with the following features: 360 revolving type. front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. tilt tension adjustment can be operated in seating position. 5-position tilt limiter giving option of variable tilt angle to the chair. seat/back tilting ratio of 1: 2 the mechanism housing should be made up of hpdc aluminium black powder coated. 5) seat depth adjustment (fu3301/fu3302): seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0 0.5 cm. 6) adjustable back support (fu3301/fu3302): back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42 0.5 cm for the comfortable back support to suit individual need. 7) pneumatic ht. adjustment (fu3301/fu3302): the pneumatic ht adjustment has an adjustment stroke of 10.0 0.3 cm. 8) pedestal assembly (fu3301/fu3302): the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 0.5cm. pitch-centre dia.(75.0 1.0cm. with castors.) 9) twin wheel castors: the twin wheel castors should be injection moulded in black pp having 6.0 0.1cm wheel diameter., visitor chair with armsoverall size visitor: back: (w)47.5 cm x (h)58.0cm, seat : (w)47.0cm x (d) 48.0cmoverall dimensions of chair seat height - 46.5cm.height - 89.5cm. width & depth of chair as measured from pedestal - width-61.4 cm and depth-64.5 cm. 1.seat/back assembly: the seat and back should be made up of 1.2 0.1cm. thick hot-pressed plywood and upholstered with fabric upholstery covers and moulded polyurethane foam. the back foam should be designed with contoured lumbar support for extra comfort. the seat has extra thick foam on front edge to give comfort to popliteal should be a.back size 47.5 cm. (w) x58.0 cm (h) seat size 47.0 cm. (w) x 48.0 cm. (d) high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded with density = 45 2 kg/

Central Government / Public Sector

CTN :40229006

26 May, 2025 NA

Chitradurga - Karnataka

Tender For supply of green coloured pp woven bags , blue coloured pp woven bags , red coloured pp woven bags , red coloured pp woven bags2 , pp woven fabric