Latest visual indication Tenders | Government visual indication Tenders

CTN :45708877

27 Jul, 2026 NA

Asansol - West Bengal

Tender For corrigendum : supply and commissioning of fire detection unit testing jig, supply:230 v ac 1ph, provision of 25 pin connector with 24 volt supply, visual indication of normal state and fault state, audio and visual indication of alarm state 1 and alarm state 2, dpm for air flow sensor signal display. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45697547

10 Jul, 2026 NA

Kotdwar - Uttarakhand

Tender For procurement of auto electrician and electronics trade equipments allen key set of 12 pieces, back probe tools, caliper inside, calipers outside, center punch, dividers, electrician screw driver, hammer ball peen, hands file, logic probe, pliers combination, screw driver, screw driver, scriber, spanner d.e. set of 12 pieces, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t- bar, ratchet and, steel rule 30 cm inch and metric, steel tool box with lock and, key (folding type), test light, wire cutter and stripper, ac alternator slip ring puller, adjustable spanner, air blow gun with, standard accessories, air impact wrench with, standard accessories, air ratchet with standard, accessories, allen key set of 12 pieces, ammeter, angle plate adjustable, angle plate size, anti theft device, auto electrical test bench, battery -charger, battery terminal cleaner tool, battery tester, belt tensioner gauge, blow lamp, caliper inside, calipers outside, car jet washer, car stereo, chisel, chisels cross cut, circlip pliers expanding and, contracting type, clamps c, clamps c, clamps c, cleaning tray, copper bit soldering iron, dc ohmmeter, depth micrometer, dial gauge type 1 gr. a, (complete with clamping devices, and stand), distributor -duel advance type,, reluctance type, dividers, drift punch copper, drill point angle gauge, drill twist, electric soldering iron 230 v 25, watts, electric testing screw driver, electrical horns ( different types ), engineer's square, executive auto electrical tool kit, feeler gauge 20 blades (metric), file flat, file, half round, file, square, file, square, file, triangular, files assorted sizes and types, including safe edge file (20 nos), flat file, flat file, glow plug tester, granite surface plate, grease gun, growler, hacksaw frame adjustable, hammer ball peen, hammer chipping 0, hammer copper, hammer mallet, hammer plastic, hand operated crimping tool (i), for crimping up to 4mm and, (ii) for crimping up to 10mm, hand reamers adjustable, hand shear universal, hand vice, high rate discharge tester (cell, tester), hollow punch set of seven, pieces, insulated screw driver, insulated screw driver, left cut snips, lifting jack screw type, magneto spanner set with 8, spanners, magnifying glass, marking out table, multimeter digital, multi-point fuel injection pump, oil can, oil stone, oscilloscope, outside micrometer, outside micrometer, outside micrometer, outside micrometer, philips screw driver set of 5 pieces, pliers combination, pliers flat nose, pliers round nose, pliers side cutting, portable electric drill machine, portable headlight aiming kit, prick punch, punch letter 4mm (number), scriber, scriber with scribing black, set of stock and dies - metric, soldering copper hatchet type, spanner clyburn, spanner d.e. set of 12 pieces, spanner t. flocks for screwing up, and up- screwing inaccessible, positions, spanner, adjustable, spanner, ring set of 12 metric sizes, spanners socket with speed, handle, t-bar, ratchet and, universal upto 32 mm set of 28, pieces with box, spark lighter, spark plug spanner, steel measuring tape, steel rule, steel rule, straight edge gauge, straight edge gauge, stud extractor set of 3, stud remover with socket handle, surface gauge with dial test, indicator plunger type i.e. 0.01 mm, tachometer (counting type), taps and dies complete sets (5, types), taps and wrenches - metric, telescope gauge, temperature gauge, tester sparking plug 'neon' type, thermostat, thread pitch gauge metric, bsw, timing lighter, universal puller for removing, pulleys, bearings, v' block, vernier caliper, vice grip pliers, voltmeter, wire gauge (metric), work bench, 4 point relays, 5 point relays, air bag simulator, air conditioned mpfi vehicle, with auto transmission and, air conditioning service unit (car), air conditioning trainer kit, alternator assembly used for lmv, arbor press hand operated 2, ton capacity, general installation/ machineries, cut section model of moc

Central Government/Public Sector

CTN :45638486

14 Jul, 2026 NA

Dahod - Gujarat

Tender For supply of visual indication unit for indicating tm current for wag7 locomotives as per rdso modificaiton sheet no. elrs/ms/339 rev.0.make: e.e.i.c (or) equivalent. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45550931

19 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For supply of class b & c surge protection device (spd) -type i & ii with visual indication and potential free contact to remote monitoring as mentiontioned in specification no. rdso/spn/165/2023 dated 20.06.24 and as per rdso guidelines on earthing , bonding lightening and surge protection system for s&t installations issued vide lettter no.rdso-sig0spd(proj)/01/2020 dated 01.05.2025. [ warranty period: 12 monthsafter the date of delivery ] ]

Central Government/Public Sector

CTN :45546481

22 Jun, 2026 NA

Pune - Maharashtra

Tender For supply and installation of class b and c surge protection device [spd] - type i and ii with visual indication and potential free contact to remote monitoring as per specification no. rdso/spn/165/2012ver 3.0 or latest and iec standard 61643 for single line 230v ac application with handling lightning surgesof 10/350 microseconds and switching surges of 8/20 microseconds .one set consists of 3 nos. of spd [2 no. of b class [l-n, n-e] and one no. of c class [l-n] all enclosed in a box with kema or vde certified as per latest iec 61643-11-2011 standard. class b and c surge protection device required with three modules only.[ warranty period: 30 months after the date of delivery ] ]

CTN :45544345

23 Jun, 2026 NA

Ghaziabad - Uttar Pradesh

Tender For humidity indicator for visual indication of rh inside a sealed missile container

Central Government/Public Sector

CTN :45473736

29 Jun, 2026 NA

Vadodara - Gujarat

Tender For supply of class b and "c" surge protection device (spd) type i & ii with visual indication and potential free contact to remote monitoring as per rdsp spec no. rdso/spn/165/2012 version 3.0 or latestand iec standard 61643 for signals line 230vac application with handling lightning surges of 8/20 microseconds. one set consists of 3 nos. of spd (two nos. of b class (l-n,l-e) and one no.of c class (l-n) all enclosed in a box with kema or vde certified as per latest iec 61643-11-2011 standard class b & c surge protection device required with three modules only with tpi inspection. make- obo/phonix/betterman/dehn. [ warranty period: 30 months after the date of delivery ] ]

CTN :45338134

15 Jun, 2026 NA

West Singhbhum - Jharkhand

Tender For supply of class b & c surge protection device (spd) -type i & ii with visual indication and potential free contact to remote monitoring as per specification no. rdso/spn/165/2012 ver 3.0 or latest andiec standard 61643 for single line 230v ac application with handling lightning surges of 10/350 microseconds and switching surges of 8/20 microseconds .one set consists of 3 nos. of spd (2 no. of b class (l-n, n-e) and one no. of c class (l-n) all enclosed in a box with kema or vde certified as per latest iec 61643-11-2011 standard. class b &c surge protection device required with three modules only. installation of class b & c surge protection device should be as per the tan no:- sts/e/tan/3006, version- 3.0 ; dated:- 08.01.2025 (tan specs attached as annexure.) [ warranty period: 30 months after the date of delivery ] ]

CTN :45159066

11 Jun, 2026 33.89 Lacs

Guna - Madhya Pradesh

Tender For supply of electrical materials for the repair and maintenance of street light as per the boq - details, t-5 power/energy saver 2x24w choke, t-5 power/energy saver 24w ftl tuberod, 2x24 t5-holder, t5 power saver 2x24 fixture acrylic transparent cover, t5 power saver 4x24 fixture acrylic transparent cover, 150w hpsv choke, 150w hpsv lamp, capacitor 33mfd 250vac 50 hz, electronic ignitor suitable for 150w hpsv lamps, 150w holder (porcelain), led driver 50w bis certified, led mcpcb plate 60w, led mcpcb plate 50w, led mcpcb plate 150w, supplyingof isi marked and approved make of moulded case circuit breaker(mccb) suitable for 3phase,3pole,50hz,415 volts, ac supply with respective interrupting capacity(ka) at 415 volts cited against their range standard conforming to is - 8828: 8.1mccb with breaking capacity 25 ka at 415 v: current rating -125 amps & 70% -100% adjustable, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light sub feeder panels - type 2 pluggable spd 3+1, rating l-n/n-pe uc 255/320 v in 30/60ka ka, lmax 30ka/60 ka, up 1.5kv, supplying of isi marked and accepted standard of miniature circuit breaker(mcb)ofcseries suitable for 240/415volts,50cycle,10ka value ac supply confirming to is:8828:1996,iec:60898 :2002 but without enclosures: single pole 63 amp., astronomical timer with dst feature, contactor 3 pole 90 amp 50hz 415volts with no-nc contacts, tpn connector 150a, supply of approved make powder coated sheet steel encloser spn mcb db inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator): 8 way double door, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light - type 2 pluggable spd 1+1, rating l-n/n- pe uc 230/400 v in 5 ka, imax 10 ka, up 1.2kv, led batten tubelight 20w, supplying of approved make tpn mcbdb metal double door with provision for fpmcb/isolator/rccb/rcbo as incomer and sp mcbs as outgoing inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator ): 8 way (8+24), 8 sq.mm multistrand pvc insulated copper wire bundle 90mtr, 1.sq.mm aluminium single core wire bundle of 100mtr. isi marked, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 2-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 4-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 1-core isi marked with alu. stranded/solid conductor: 25sq.mm unarmoured, wooden ladder 21ft, toolkit set consisting of different sizes l-keys, screw drivers, testers and plier set., taperoll box consisting of 30pcs (conforms to is: 7809 (part 3, sec 1),self extinguishing,protects from electrolytic corrosion,excellent water resistance,suitable for primary ins

CTN :45127705

18 May, 2026 4.68 Lacs

Amber - Rajasthan

Tender For corrigendum : supply, installation, testing and commissioning of security equipments for abmer fort, jaipur (dfmd, hhmd and dragon lights). - specification for multizone dfmd, microprocessor, nine zones, automatic tuning, lcd display, detect ferrous/non ferrous metal.. ferrite and alloys in entire frame area. all possible speed. pin point detection with identification at correct zone interference /false identification of adjacent zone. separate audio and visual indication for ferrous and non ferrous metals., low battery indication., wide range of sensitivity setting and fine tuning,, zone wise sensitivity setting., in-out and net, with & without ir, external with single pcb for easy maintenance, height 200 cm approax., breadth 72 cm approax ., -20 degree celcius to, +55 degree celcius, approx. 90 kg, s.m.p.s. regulated 90 volt to 270 volt, 12 volt rechargeable battery, power source 230, power source 10, %volt ac 50 hz., (a) 5 year from the date of installation (include spares and, service), (b) oem supplier must give undertaking to provide spares for 07 years, 7 years, led, coated panel with inbuilt walk /stop, uniform from top to bottom, 20-25 people per minute, with computer system, specification for hhmd, not more than 400gm, 9 volt rechargable battery ( lithium 800 mah. only)with inbuilt charger, a. system on, b. detection on, c. charging on, should be detect both metals ( ferrous and non ferrous), 1 pistol at min 6 , 2 cartridge at min 2 , 3 razor blade at min 1 , (detection should be low to high level ), automatic, 07 years minimum, at jaipur, s.m.p.s. regulated 100 volt to 250 volt, (a) 03 year from the date of installation (include spares and service), (b) oem/ supplier must give undertaking to provide spares for 07 years, visual led, visual l e d indicator, specification for dragon search light, not more than 1.25 kg, 215 l x 152 h x 167 w mm, lithium-ion 3.7 volt 15000 mah, 5 volts, 20 watt, led, white, polypropylene, 8-10 hrs on fully charged, (a) 03 year from the date of installation (b) oem/ supplier must give undertaking to provide spares for 04 years, 110-230 a-c, full battery indication blink on adopter, around 500-700 meter, 3 modes low high sos blinker

Visual Indication Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector