Latest voltammetry cell Tenders | Government voltammetry cell Tenders

State Government

CTN :45521250

29 Jun, 2026 42.81 Lacs

Jaipur - Rajasthan

Tender For nit 21 work of replacement of submersible pump sets and accessories of tubewell at various locations under uwss chomu under jen section chomu (urban) under sub div chomu in jurisdiction of executive engineer, phed district division ii, jaipur - 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.2 up to 5.5 kw (7.5 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.4 7.5 kw (10 hp) & head above 120 mtr., 2.15 supply & installation of 3 phase isi marked submersible motor pump set of three star or better rating of bee and as per is: 8034-2018 (pump) and is 9283-2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/dcb. the job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect.2.15.6 9.3 kw (12.5 hp) & head above 120 mtr., 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. the size of cc platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. the panel should have opening of suitable size in front of space for energy meter with glass for meter reading. the operation of panel should be suitable for on 440 volt ac supply.2.18.1 above 5 hp and up to 10 hp, 2.18 supply and fixing of electric control feeder panel comprising of suitable rating mccb , fully automatic star-delta starter, over load relay, ampere meter with cts, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc complete suitable for three phase pump set. the panel should have space for energy meter ( supplied by discom). all these equipments shall be housed by panel box made out from 18 gauge m.s. sheet with powder coating. panel should be of minimum size 900 x 600 x 450 mm with stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg s length 18 and double door including in built locking system. the legs should be embedded in m-15 cement concrete plat form. t

CTN :45523985

06 Jul, 2026 NA

Mumbai - Maharashtra

Tender For procurement of hot dip galvanized sleeves for 14.5 meter height street lighting poles.

CTN :45531368

19 Jun, 2026 4.72 Lacs

Multi City - Multi State

Tender For maintenance of electrical installation and fans for residential qtrs of central excise and income tax colony seminary hills nagpursubwork/packages:rewiring work in quarter no. 1, type-iv and supply, installation, testing and commissioning of 3.0 meter height octagonal pole

Central Government/Public Sector

CTN :44949153

13 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras supply of engineering instrument box , vernier caliper digital 0- 200mm , vernier caliper digital 0-500mm , vernier caliper digital 0-600mm , measurement tape 5 meter- metal , measurement tape 10 meter- metal , digital outside micrometer 0-150 mm , digital outside micrometer 150-300 mm , pitch gauge m2 to m20 , digital height gauge 0- 600mm , digital inclinometer , stainless steel protractor 0- 180 degree , universal bevel protractor -stainless steel , digital depth gauge 12inch 0-300mm , digital depth gauge 24inch 0-500mm , spring caliper set 2 pieces - inside and outside 0-400mm , sprit level -30 cm

State Government

CTN :45482296

13 Jun, 2026 49.9 Thousand

Nadia - West Bengal

Tender For notice for the vbgram materials supply - supply of first aid box including medicines (specified by pia) at, model citizen information board for ibs( specification-made of, with a height of 3ft, width 2ft and thickness of 4 inch & 30 degree, head with pentagonal shape including fixing the mgnrega, biswa bangla logo in upper side of the board and supply in, mgnrega worksite anywhere., model citizen information board for community (specification-, of brick structure with plastering and colour ( back colour, and black for writting) with a height of 4ft, width 3ft and thickness, 4 inch & 30 degree in head with pentagonal shape including fixing, the mgnrega and biswa bangla logo in upper side of the board, supply in the mgnrega worksite anywhere., g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., other local wood, supplying, fitting & fixing factory made p.v.c. door frame of size, mmx47 mm with a wall thickness of 5 mm, made out of extruded, mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china foot rests 250x125x25 mm, ptmt - towel rail (600 mm), fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, hydraulic door closer tuular type aluminium section body, anodiesd aluminium hanging type door stopper, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated, factory made solid panel pvc door shutter consisting of outer, made out of m.s. tubes of 19 gauge thickness and size 19 mmx19, mm for styles, top and bottom rails, m.s. frame shall have cost, steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame, made of flat bent bar, end bifurcated with necessary screws etc., cement concrete(1:2:4) as per direction. (cost of concrete will be, paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured, from extruded section conforming to i.s. specification (i.s. 205/66), and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x, 4.0mm, anodised aluminium barrel / tower / socket bolt (full covered) of, approved manufactured from extruded section conforming to i.s., 204/74 fitted and fixed with cadmium plated screws: (vi) 200mm, long x 10mm dia. bolt., anodised aliminium d-type handle of approved quality, manufactured from extruded section conforming to i.s. specification, (i.s. 230/72) fitted and fixed complete: (a) with continuous plate, base (hexagonal/ round rod) (iii) 100 mm grip x 12 mm dia rod., (c) supplying 6 levers 'godrej' crystal satine mortice lock with keys, including fitting & fixing complete., i) iron hasp bolt of approved quality fitted and fixed complete, (oxidised) with 16mm dia rod with centre bolt and round fitting. (, 200mm long, door stopper.(brass), red lead primer for steel grill, interior premium imulsion(plastic paint), exterior imulsion weather coat paint, distemper paint, supply of upvc pipes (b type) (for soil pipe purpose) & fittings, conforming to is-13592-1992 (a) (i) single socketed 3 meter length, (c) 160 mm, (ii) plain tee for soil pipe purpose. (c) 160 mm, v) plain y for soil pipe purpose. (c) 160 mm, supplying, fitting & fixing upvc down pipes a- type and fittings, conforming tois:13592-1992 with all necessary clamps nails,, including making holes inwalls, floor etc. cutting trenches in any soil, through masonry concrete, structures etc if necessary and mending good damages including, joining withjointing materails (spun yarn, valamoid/bitumen/m-seal, etc) complete. a) upvc pipes: (ii) 110 mm. dia., s, d) shoe (ii) 110 mm. dia, qgs seed(10 variety), g.i. hollow pipe squre or

State Government

CTN :45412464

09 Jun, 2026 55.87 Lacs

Firozpur - Punjab

Tender For wss dhani gurmukh singh, block guruharsahai, district ferozepur - name of scheme : augumentation of water supply scheme dhani gurmukh singh, block guruharsahai, district ferozepur (pb.) (under head nabard-xxxi) - providing and installing of 150mm i/d upto 150 mtr. depth with hand boring, construction of one no. rcc ohsr 25000 ltrs capacity with sill level not less than 15.50 mtr. and height upto fsl 17.20 mtr from formation level, disinfection unit electrically based and construction of pump chamber 3.05 x 3.70m including gravil pit and construction of ihhl ,complete in all respects , & providing, laying, cutting, jointing & testing of pvc pipe 10 kg/cm2 for rising main & 6kg/cm2 for distribution. including cost of excavation, dismantling & relaying of dry brick on edge paving, cc flooring, house hold water connection with water meter, pumping machinery, solar panel, development of water works site i.e. corner pillars, barbed wire fencing, angle iron picket, d-hooks, gate pillars, foot path, cement concrete sign board, including carriage of material complete in all respect. (completion period 10 month)

State Government

CTN :45412468

09 Jun, 2026 84.37 Lacs

Firozpur - Punjab

Tender For wss issa panj grain, block guruharsahai, district ferozepur - name of scheme : agumentation of water supply scheme for village issa panj grain, block guruharsahai, district ferozepur (pb.) (under head nabard-xxxi) - providing and installing of 200mm i/d upto 150 mtr. depth with hand boring, construction of one no. rcc ohsr 50000 ltrs capacity with sill level not less than 17.00 mtr. and height upto fsl 20.00 mtr from formation level, disinfection unit electrically based and construction of pump chamber 3.05 x 3.70m including gravil pit and construction of ihhl ,complete in all respects , & providing, laying, cutting, jointing & testing of pvc pipe 10 kg/cm2 for rising main & 6kg/cm2 for distribution. including cost of excavation, dismantling & relaying of dry brick on edge paving, cc flooring, mattalled road, house hold water connection with water meter, pumping machinery, solar panel, development of water works site i.e. corner pillars, barbed wire fencing, angle iron picket, d-hooks, gate pillars, foot path, cement concrete sign board, including carriage of material complete in all respect. (completion period 10 month)

State Government

CTN :45455833

22 Jun, 2026 NA

Kochi - Kerala

Tender For supply of furniture - supplying sheesham wood office table with drawer and lock with key of size 135 x80 cm supplying sheesham wood computer table of size 100 x 50 cm with provision for providing cpu, keyboard etc. ,mica laminated table size2l0 cm length x 110 cm width with 6 mm glass top ,revolving chair (photograph attached) ,high back mesh chair ,adjustable lumbar support ,adjustable arm rest ,nylon fabric seat ,synchro mechanism ,dimension ,width-45 cm,depth -69 cm,height-130 cm ,file cabinet of suitable size in good quality material (multi ,wood /wpc etc.) ,2 meter x2 meter ,l meter x2meter

CTN :45176504

12 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For corrigendum : supply of rcc column , foundation , total column height 12.5 m from ground , ms chequered platform at height of 5 meter , ms chequered platform at height of 10 mtr , launching platform at 10 meter , over shed cover at top platform , ms laddar slope type with railing , all slithering platform to have safety grills on all three sides , loading area with brick work and loose sand filling , rock climbing surface, single face height 40 feet width min 8 feet , crash mat size 3mx2x30cm mattress for safety with cover , slithering rope 10mm dynamic climbing , slithering gloves , seat harness full size , carabiners , helmt

CTN :45427779

18 Jun, 2026 2.46 Lacs

Thanjavur - Tamil Nadu

Tender For supply of eee lab items - furniture, 5hp/3.75kw/415v1500rpm three phase(3 )synchronous motor with starting / loading arrangement and with work bench voltage:415v ac/220v dc for field excitation make: benn rating: 5hp/ 3.75kw speed:1500rpm no of poles : 4 synchronous starter dc excitation field current :0.8a digital voltmeter ac(0-500v) moving iron type:01qty digital ammeter ac(0-20a) moving iron type :01qty digital ammeter dc(0-2a) moving coil type :01qty digital power factor meter 600v/10a :01qty 3pole mcb/dc mcb with 20a fuse carrier and supply indicators (three pin plug socket should also be provided) :03qty digital rpm indicator with proximity sensor: 01qty banana connectors for motor/starter/supply outputs :01qty control panel (hylem sheet(5*1.5feet) with ms panel) :01 work bench spec: size: 4feet*3feet*2 1/2 feet height leg teak wood with top 3/4" inch plywood 18mm plywood withone mica sheet for finishing front side cupboard with door open and closed type back side wiring box with door open and closed type, performance of ultrasonic and moisture sensors(5v dc/15ma(40khz/digital output) arduino uno: microcontroller-atmega328p on-board digital sensor components two push button switches and dour leds buck converter and relay for 5v and potentiometer-one each 2x16 liquid crystal oscillator(lcd) and mini bread-one each onboard digital sensor modules: ultrasonic sensor module(3cm-100cm) and soil moisture sensor -one each all sensor modules should be mounted on legend size pcb, speed control of ac motor using variable frequency drive(vfd) (0.5hp/415ac/5a(3 )) variable frequency driver (vfd) unit: input voltage:single phase, 230v ac +-10%, 50hz output voltage : three phase output frequency range: 0 to 60hz suitable for 0.75kw motor output current 4.2a vf pattern of spwm control 2pole mcb for on/off control of mains ac voltmeter, ammeter and speed indicator should be provided external stop/start and frequency control should be provided output terminals should be provided and must be brought out in front panel experimental board should be housed in a cabinet with suitable cover three phase induction motor motor type:squirrel cage |rating:0.5hp voltage rating :415v ac speed :1440rpm+-5% insulation : class b/f

Voltammetry Cell Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

State Government

State Government

State Government

State Government