Get complete information related to latest Voltmeter Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Voltmeter Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Voltmeter Scrap Tenders.
Tender For supply of set of elastomeric sealing rubber for 3-phase locomotives as per clw specification no. clw/ms/3/034 alt-6 or latest consisting of 03 items : (i) gasket for lip as per clw drg. no. 1209-18.406-091 alt-3 or latest, qty- 16.2 meters (ii) self gripping sealing rubber as per clw drg. no. 1209-18.406-089 alt-5 or latest, qty- 53 meters for wap-5 loco and 62 meters for wag-9/wap-7 loco (iii) self gripping sealing rubber as per clw drg. no. 1209-18.406-088 alt-2 or latest, qty- 01 meter.
Tender For ratlam division-naikheri - electrical work in connection with (1) provision of high level platforms with cover shed (simhastha 2028). (2) provision of 2 nos. 6 meters wide fobs with cover with ramp at naikheri station (simhastha 2028)
Tender For providing of custom bid for services - 9050c25c16 - checking, inspection, verification/validation services for fci flare flow meters at mathura refinery line item 10 - man day charges for 1st yr,custom bid for services - 9050c25c16 - checking, inspection, verification/validation services for fci flare flow meters at mathura refinery line item 20 - man day charges for 2nd yr
Tender For corrigendum : tender for supply of ird mechanalysis turbovisory instruments : : - make- ird mechanalysis limited ird544m-vibration sensor , inductive velocity , top exit , mil 2-pin connector , 42.52mv/mm/s , 10hz-1khz sku - m97120 , make- ird mechanalysis limited stud for vibration sensor item no 1 , mounting/grub screws , 1/4 inch-28unf male , m6x1male sku-stud-m6 provides connection between vibration sensor and mounting pad , m/s ird mechanalysis limited vibration sensor mounting pad mild steel blackodized for ird544m (60x60x16 mm) with m6 thread for item no 1 tapped sku - ms-pad-ird544m , make- m/s ird mechanalysis limited vibration sensor cable assembly for item no 1 , signal cable teflon 3.5mm dia , ss conduit 5mm id , 15 meter length straight , 2 pin ms , shielded , spade lugs at free end sku-m601015spade lugs at free end carry following colour code- red core-signal live black core signal ground green core- signal shield , make- ird mechanalysis limited eddy current pickup set comprising of probe , driver and connecting cable for 9 meter system. constituents.. 1) eddy current pickup , 8 mm tip dia , m10x1 thread. 60 mm long 2) eddy current pickup extension cable , 8 meters length , suitable connectors at both ends for connection to probe as well as driver 3) eddy current probe driver , -24v supply. these will with ird mechanalysis branding , make- m/s ird mechanalysis limited ird8800 rack , 8 position , 5u sku-m88008 this is the bin and will accomodate ird8800 cards , make-ird mechanalysis limited ird8800 (8800) , m88250 (88250) casing vibration module , 2ch velometer input (mv /mm/sec) and 1ch key phasor input , api standard 670 compliant sku-m88250-dc ird8800 series module m88250 can work with all types of velocity output vibration sensors that provide mv/mm/sec output - like ird531 (4 mv/mm/sec) and ird544m (42.52 mv/mm /sec) , make- m/s ird mechanalysis limited ird8800 (8800) , m88900 (88900) - speed module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 v dc sku-m88900-dc input- accelerometer and/or velometer outputs-4-20 ma dc output proportional to full scale vibration , technical specification attached in pdf , make- ird mechanalysis limited ird8800 (8800) , m88600 (88600) - eccentricity module , 2ch eddy current pickup input , api standard 670 compliant , input- 24 vdc sku-m88600-dc input- accelerometer and/or velometer outputs-4-20 ma dc output proportional to full scale vibration , technical specification attached in pdf , make- ird mechanalysis limited 35 mm din rail mount industrial grade power supply , 480 w , product- rps480 , 24 v dc output , technical specification attached in pdf , make- ird mechanalysis limited cabinet 1500 x 600 x 600 in mm , ip32 sku - cabinet-1500-600-600-ip32 , installation , commissioning and calibration check of all supply sensor with unit at site .
Tender For corrigendum : request for bids for supply, installation and commissioning of slaughter house plant as per apeda standard - a: civil work items, dismantling the reinforcement cement concrete (r.c.c.) work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete., dismantling brick masonry in lime or cement mortar and stacking the material as directed with all leads, lifts etc., removing doors and windows with frames and stacking the materials as directed with all leads, lifts etc. complete., removing ventilators and small windows with frame and stacking the materials with all leads, lifts etc. complete., removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete, removing purlins from roof including stacking as directed with all leads , lifts etc. complete., removing rafters from roof including the materials as directed with all leads , lifts etc. complete., removing queen post truss from roof and stacking the materials as directed with allleads and lifts etc. complete, removing galvanized iron (g.i.) or asbestos cement (a.c.) sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete., excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the excavated material upto distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical means, lift upto 1.50 m, excavation for foundation in hard murum including removing the cubic meter (cu.m) excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift from 1.5 to 3.0m.) by mechanical means, excavation for foundation in soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (lift from 1.5m to 3.0 m.) by mechanical means, lift upto 3.0 m, excavation for foundation in hard-rock by blasting including cubic meter (cu.m) trimming and levelling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 metres from the building area including dewatering and back filling with available earth/murum watering, ramming etc. complete. (lift from 1.5m to 3.0 m) by mechanical means, filling in plinth and floors with approved excavated materials available at site in 30 cm layers include- ing watering and compaction with plate compactor to required proctor density etc complete., filling in plinth and floors with contractors material/brought from outside and approved by engineer in charge in layers of 15 cm to 20 cm including watering and compaction etc. complete., providing dry trap / granite / quartzite gneiss 200 mm thick hard core metal spread in two layers each of 125mm thick crushed to 100 mm c
Tender For corrigendum : video wall display to be integrated with integrated and unified command control centre of commissionerate of police bhubaneswar -cuttack of during the current financial year 2025-26 - video wall:(dimensions of the video wall should be 7.75 meters (w) x 3.34 meters (h) with a stand of 1500mm height.)controller: management server with a minimum of 10 inputs for seamless content management.software plug-in: plug-in for integration with the existing genetec ucc platform