Latest vtm kit Tenders | Government vtm kit Tenders

Central Government/Public Sector

CTN :44993259

15 May, 2026 35.34 Lacs

Bhopal - Madhya Pradesh

Tender For supply of experimental setup for the study of forced oscillations , helmholtz coil experimental setup for the study of magnetic field , experimental setup for the verification of faradays law and induced emf , capacitance and dielectric constant measurement experimental setup , experimental setup for the determination of specific heat capacity of solid materials , experimental set up for the determination of thermal and electrical conductivity of metallic samples , experimental setup for determination of low resistance using carey foster bridge , experimental set up for determination of acceleration due to gravity by katers pendulum , experimental setup to determine the value of stefan constant , experimental setup for determination of youngs modulus of materials , meldes experiment setup for transverse vibrations , experimental setup for interference and wavelength measurement using michaelson interferometer , experimental setup for the determination of plancks constant using led b15 , newtons ring experimental setup , diffraction grating experimental setup , four probe experimental setup , hall effect experimental setup , photoelectric effect experimental setup , experimental setup for the study of diode characteristics ) /bid number : gem/2026/b/7470148 * /dated: 24-04-2026 & & / bid document 1 / 21

CTN :43523598

05 May, 2026 26.00 Crore

Sibsagar - Assam

Tender For corrigendum : major inspection (mi) of ge make frame v, 20 mw gas turbine (gt) unit no-5 along with supply of materials at phase-ii powerhouse of lakwa thermal power station (ltps), apgcl, maibella

CTN :44891328

30 Apr, 2026 NA

Udyogamandal - Kerala

Tender For miscellaneous works in thermal-2 - miscellaneous works in thermal-2, the work shall be carried out on a manday basis and includes collection, segregation, and shifting of metallic and non-metallic waste materials from the thermal-2 building premises. the activities cover handling of rusted metallic items, structural scrap, insulation materials, oil sludge/oil slick, mud, debris, and other miscellaneous scrap lying at various locations such as the ground floor near boiler area, pipe rack area, tg floor area, cooling tower area, and other surrounding premises. the work also includes bringing down waste materials from different floors of boiler units 1, 2, and 3 to ground level and consolidating them at a designated location. all manpower, tools, tackles, and equipment shall be provided by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be executed on a manday basis and includes loading and unloading of segregated metallic and non-metallic scrap/waste materials within the fact ud / petro plant premises as directed by the engineer-in-charge. all required manpower, tools, tackles, and handling equipment including concrete lump breakers shall be arranged by the contractor. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., transportation of scrap and waste materials loaded under sl. no. 2 from cpp - pd premises to the designated scrap yard, waste dumping area, or any other location within the fact ud / petro plant premises, as directed by the engineer-in-charge. the contractor shall provide a suitable truck having carrying capacity up to 2 tonnes for the purpose.the rate per trip shall be inclusive of all charges such as vehicle hire, driver wages, fuel, and any other incidental expenses.copies of the relevant scrap dispatch advice and weighbridge report shall be submitted by the contractor for each lot of material transported. the quantity indicated is tentative and payment shall be made based on actual number of trips certified by the engineer-in-charge., the work shall be performed on a manday basis and includes moving and rearranging used materials and equipment parts such as valves, pumps, flanges, motors, radiators, drums, welding sets, structural items, roof sheets, and other related materials stacked at various locations including cpp building north and south entrance areas, boiler feed pump area, tg floor area, and other specified locations, as instructed by the engineer-in-charge. required cleaning materials, rigging materials, tools, tackles, and manpower shall be arranged by the contractor. the eot crane at the tg floor may be used free of cost, subject to availability. loading and unloading for shifting within the petro plant premises shall be in the contractor s scope. payment shall be made based on actual mandays engaged and certified by the engineer-in-charge., the work shall be carried out on a manday basis and includes removal of vegetation from the outer side walls and top platforms of cooling tower cells, removal of vegetation from the side walls and floor of the cooling tower pond, and removal of accumulated mud, slurry, and other unwanted materials within the cpp cooling tower area. all manpower, tools, tackles, and equipment required for execution shall be arranged by the contractor. cleaning of all four cooling tower cells shall be treated as a single activity., the work shall be executed on a manday basis and includes thorough cleaning of the furnace oil (fo) pump house area. furnace oil spillage on floors, including areas beneath oil heaters, around pumps, condensate drains, and adjoining areas, shall be removed by spreading sawdust and collecting the oil-soaked sawdust for proper disposal as instructed by the engineer-in-charge. sawdust, cotton waste, manpower, tools, and all other materials required for complete execution of the work shall be arranged by the contractor. payment shall

Central Government/Public Sector

CTN :44759120

20 Apr, 2026 NA

Atthipattu Puthunagar - Tamil Nadu

Tender For corrigendum : erection and commissioning of electrical and c and i works for fgd at north chennai stage ii - erection, testing and commissioning and trial operation including supply and application of final painting and handling of materials at site bhel stores / client stores/ storage yard, transporting to site of erection of electrical, c&i works for flue gas desulphurization (fgd) system at 1 x 800 mw north chennai thermal power plant stage-iii, chennai.

Central Government And Public Sector

CTN :44901429

05 May, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of helical inline gear motor to the model no. sk 973.1 - 112mp/4 tf for axle pusher chain conveyor of make m/s nord or substantially equivalent with following features: input speed(rpm): 1440; output speed(rpm): 21; gear ratio: 68.5; power (kw): 4; service factor: 1.8; output torque: 1817 nm; overhung load: 25 kn; axial load: 22 kn; motor inverter speed range: standard line powered inverter capable; voltage: 400/690 v; frequency: 50 hz; efficiency class: ie3; current 1: 7.85 a; current 2: 4.53 a; cosinus: 0.83; motor duty: s1 - continuous; enclosure: ip55; insulation class - f; mounting pos - m1; housing material: cast iron housing; type of housing: foot mount; output shaft: solid keyed shaft; output shaft (dia x length): 60x120mm; output shaft material: standard; gearbox breather options: auto vent; gearbox sealing options:fkm seals; bearing design: standard bearings; motor cooling: tefc - totally enclosed fan cooled; motor thermal protection: thermistor; motor option: fluoro rubber motor seals; height of output shaft center frombottom of base plate: 225 mm; mounting base plate details: minimum plate thickness: 50 mm; 04 holes of 22 mm dia each with square pattern; distance between holes along the shaft: 310 mm; distance between holes perpendicular to shaft: 250 mm; note: - (i) material of construction: fabricated steel housing (stress relieved) (ii) all gears shall be manufactured from steel forgings or rolled bar made from steel 17cr ni mo6/18cr ni mo6 (case hardening steel). (iii) all gears shall be case hardened to 58-62 hrc and profile ground. (iv) output shaft shall be of en 9 material normalized to 201 bhn (min) (v) bearing used shall be rolling element type of make skf/ntn/timken/fag only. special conditions: above specified materials are the minimum required standard to be considered while designing the gear motor. [ warranty period: 18 months after the date of delivery ]

State Government

CTN :44830844

08 May, 2026 1.64 Crore

Gandhinagar - Gujarat

Tender For invitation to bidfor two years rate contract for removal, supply and application of thermal insulation materials at gsegs ccpp at hazira, surat

Central Government And Public Sector

CTN :44773441

23 Apr, 2026 NA

Bangalore - Karnataka

Tender For supply and installation of pyrofold modules with following specifications for combustion chamber of thermal sand reclamation plant (tsrp). 1) pyrofold m module, material grade: 1260 degree c, density: 160 kg/cubic m, size: 305x305x225 mm thk., anchor grade: ss-304, without stud & nut (type-a yoke)-qty: 309 nos. 2) pyrofold m module, material grade: 1260 degree c, density: 160 kg/cubic m, size: 305x305x225 mm thk., anchor grade: ss-304, without stud & nut (type-b yoke)-qty: 26 nos. 3) pyrofold m module, material grade: 1260 degree c, density: 160 kg/cubic m, size: 305x215x225 mm thk., anchor grade: ss-304, without stud & nut-qty: 76 nos. 4) pyrofold m module, material grade: 1260 degree c, density: 160 kg/cubic m, size: 305x305x265 mm thk., anchor grade: ss-304, without stud & nut-qty: 11 nos. 5) pyrofoldm module m8x67 mm long stud & nut-qty: 422 nos. 6) cerablanket 1260 degree c, density 128 kg/cubic m, size 7300x610x25 mm backup & packer-qty: 60 rolls. 7) cera bulk, classification temp 1260 degree c (en 1094-1), specific gravity 2.5 g/cubic cm-qty: 250 kgs. 8) hair pin ss-304, size: 5 mm dia x 150 mm lg-qty: 50 nos. 9) seal coat, wet density 1300 kg/cubic m, dried 500 kg/cubic m, max temp 1427 degree c-qty: 250 kgs. 10) stud and tyne anchor ss-304-qty: 55 kgs. 11) unilock anchor ss-304-qty: 10 sets. note: (1) the detailed scope of work and technical specifications has been mentioned in annexure - a attached in document tab. (2) all materials shall be of with manufacturers test certificates and warranty shall be 12 months from the date of installation. (3) one set consists of all the items mentioned above. ]

CTN :44229403

09 Apr, 2026 NA

Patna - Bihar

Tender For corrigendum : supply of engineering books c c - advanced engineering mathematics , a modern introduction to ancient indian mathematics , mathematics-1 , engineering chemistry , applied chemistry laboratory practices vol i and ii , applied chemistry with lab manual , introduction to computing and problem-solving using python , python programming , programming in python , communication skills in english aicte prescribed text book , technical communication for engineers , an english grammar comprehending principles and rules , engineering drawing , green technologies and environmental sustainability , coping with natural hazards indian context , fundamentals of electrical engineering , electrical technology vol- i , basic electrical and electronics engineering , basic electronic engineering , workshop practice , engineering workshop practice , the constitution of india , communication skills in english , communication in business and management business communication , fundamentals of electrical and electronics , microwave and radar engineering with lab manual , engineering mechanics , fundamentals of materials science and engineering , analog circuits , electronic devices and circuits , electronics devices and circuit theory , electronic principles , network and system , network analysis , schaums outline of electric circuits , network analysis and synthesis , circuit theory , engineering circuit analysis , a text book of electrical engineering , professional ethics and human values , 3d printing and design , microelectronic circuits , linear integrated circuits , op-amp and linear integrated circuits , operational amplifiers and linear ics , digital principles and applications , microprocessor architecture programming and applications with the 8085 , 8051 microcontroller architecture programming and applications with the 8085 , the 8051 microcontroller and embedded systems using assembly and c , microcontroller principle and application , microcontroller theory and application , microcontroller architecture programming interfacing and system design , a course in electrical and electronics measurements and instrumentation , electronic instrument and measurement technique , electand electronic measurement and instrument , a text book of electrical technology vol-i basic eg , electrical and electronic measurement and instrumentation , kennedys electronic communication systems , modern digital and analog communication , communication systems , principles of optical communication and opto-electronics , principles of communication systems , printed circuit board-design fabrication assembly and testing , programming in scilab 4. 1 , modeling and simulation using matlab , getting started with matlab a quick introduction for scientists and engineers , pcb design and technology , basic electronics and linear circuits , modern digital electronics , control system engineering , linear control systems , automatic control systems , control systems , modern control engineering , text book of physics for class xii part-i partii , iot applications security threats and countermeasures , applied physics-i , applied physics-ii , engineering physics , workshop practice , a textbook of workshop technology , manufacturing technology volume-01 , microsoft office 2019 for dummies paperback - 1 january 20 , office 2019 in easy steps , hydraulics fluid mechanics and hydraulic machines. , fluid mechanics and hydraulic machines , hydraulics and fluid mechanics including hydraulics , textbook of fluid mechanics and hydraulic machines , engineering thermodynamics , heat and mass transfer //bid details2 / 121fundamentals and applications , thermodynamics an engineering approach , applications of thermodynamics , basic and applied thermodynamics , thermal engineering , a text book of refrigeration and air conditioning , refrigeration and air conditioning , alternatives in refrigeration and air conditioning , wind power technology 3rd edition , hydropower , a t

Central Government/Public Sector

CTN :44289707

06 Apr, 2026 NA

Bhadradri Kothagudem - Telangana

Tender For corrigendum : etc of boiler and its auxiliaries and material management at 1x800 mw singareni thermal power project mancherial india - package-a: erection, testing, commissioning, trial operation and handing over of boiler and its auxiliaries including pressure part, non-pressure parts, duct dampers and its support structure, rotating equipment’s, air pre-heaters, id/fd/pa fans, mills, refractory etc. along with application of lining, insulation, supply & final painting/ touch-up painting as applicable and wherever required as per painting schedule including handling of materials at bhel / client's stores / storage yard and transportation to site at 1x800 mw singareni thermal power project, mancherial, india package-b: receipt, unloading, verifying, shifting, stacking, preservation, handling and handing over of components of boiler with auxiliaries including mills & feeders etc.; esp with auxiliaries, steam turbine & auxiliaries; turbo-generator & auxiliaries; pumps with aux., rotating machines, tanks & vessels, electrical, controls and instrumentation equipment’s, panels, cables / cable trays, and other related items including items of boiler, tg & other packages; hp & lp piping; refractory & insulation with cladding materials; bhel t&p; components & equipment of various other systems, pre-fabricated structures, structural & reinforcement steel, cement, supply installation and maintenance of cctv camera and providing services for materials management at 1x800 mw singareni thermal power project, mancherial, india

Central Government/Public Sector

CTN :44670933

31 Mar, 2026 NA

Multi City - Gujarat

Tender For auction sale of depot miscellaneous scrap - steel 98090719 stainless steel/magnet steel scrap released from various unserviceable items such as ss fan guards, fan jali, fan ribs, fan blades, locking rib, grid clip, rib assembly, cable thread, racks, ss wire rope, dish wash washing units, impellers, chair benches,chequre plate (may possible), retention tank assembly, retention tanks, dustbins, screws, bakda/3-seater seats, stay rods, drums, mugs, pans, trays, thali, bowls, blower drums, blower runners left and right hand, hand blower runner, vacuum fryer drum, sheets, plain sheets and cut-offs, turf sheets, plates, hot water tanks, boiler tanks,bio toilet and its parts,hot case, air pressure tanks, angles, mouldings, flats, pipes, patti, wash basins, raf/faf frames, air filter frames with or without ms jali, chimneys, magazine pockets, wall protectors, steam protector boxes with thermal insulation, doors, cupboards, bottle holders, liquid containers, seaters, thermos, commode with or without rubber attachments, hot case, blowers, e.l. boxes, fuse boxes, battery boxes, ac frames,fire extinguisher(steel) squatting pans, table and furniture attachments, hospital operating instruments such as scissors, forceps, dressing drums, handle pipe rods, water bottle stands, medical trays, kidney trays, dishes, bowls, deep freezer or defrizer with or without foam, deep freezer boxes, defrizer boxes along with body, stools, kitchen items and utensils such as fry pans, spoons, degchi/pots, discs, gas stove pots, gas stoves, 3-burner cooking ranges, dish wash sinks, stainless steel sinks, water tanks or reservoir tanks with or without ms attachments and cut pieces, fire extinguishers with or without minor ferrous or non-ferrous attachments, horn steel items, capsule tanks, foundation of siemens rake, roof vents carriage, roof vent carriage, lift cabin and landing doors, set of housing drum for blower, stainless steel items, steel scrap, broken and damaged materials including minor rubber, ms and aluminium attachments, hospital and canteen miscellaneous steel items, and other assorted stainless steel or magnet steel scrap of various sizes and shapes, all materials unserviceable and not fit for railway use, sold on %u201cas is where is%u201d basis, loading by purchaser, custodian: dms/scrap/pardi.

Vtm Kit Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector