Latest vulsellum Tenders | Government vulsellum Tenders

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

CTN :45033139

30 May, 2026 NA

Multi City - Gujarat

Tender For auction sale of machineries, electric industrial, non-electric industrial - disposal of furniture, machineries, electric item (lot-1)

Central Government / Public Sector

CTN :44977114

13 May, 2026 NA

Delhi - Delhi

Tender For disposal of equipment and miscellaneous item as scrap of year 2024 and 2025 at international centre for genetic engineering & biotechnology (icgeb

Central Government/Public Sector

CTN :45019217

07 May, 2026 NA

Agra - Uttar Pradesh

Tender For auction sale of depot ferrous scrap - condemned scrap m.s wheel turning chips (partially corroded) two stacks ds-8 note no-155703 dt 18.02.26, this item has been condemned vide letter no. s/09/c&w/agra/scrap approved date- 18.02.26, provided by stock holder covering letter for its disposal. delivery on actual weight basis. delivery will be given on as is where is basis. lot is approachable by pakka road. bidders are required to visit the lot site for being aware about the site, condition/location and satisfy themselves before participating in the-auction.

corporations/Associations/Others

CTN :44996885

30 Apr, 2026 NA

Bengaluru - Karnataka

Tender For auction sale of disposal of static test rig,disposal of electronic-waste (e-waste),disposal of electrical-waste (e-waste),disposal of various types of old, rusted, unusable old scrap ms pipes, etc,,disposal of various old, rusted facilities spare parts/tools, fittings, etc,,disposal of old, used hepa filter,disposal of old, un serviceable motors, pumps, vacuum pumps, valves, hoist etc,,disposal of air compressor system,disposal of three types of liquid nitrogen storage tank,disposal of old, rusted integration tools,disposal of old, rusted gi duct, walk-in coolers panel, tools,disposal of used fuel filters, oil filters, coolant and lube oils etc,,disposal of old, used and dead batteries (hazardous item)

Central Government / Public Sector

CTN :44942552

28 Apr, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot miscellaneous scrap - verticle turrent lathe : actual lot no. 031126040077; pl no.98325012 (01); [hsn code: 85043300;gst@18% on fcm basis] cond and u/s scrap of vertical turret lathe make : kirloskar. main parts -job holdig chuck -01nos,turret-01nos,guide ways-02nos ,motors -03nos(30kw,3.7kw,7.5kw) ,gearbox-01nos ,spindle arrangement-01ns ,tool holder-01nos etc. (total weight: 8000 kg approx).machine removed from its original place and kept aside with all the parts full or broken. with or without attachments/parts. said to contain, copper: 40 kg, ms: 7960 kg approximately. note: mode of disposal of item as is where is basis ,special conditions will apply. delivery on 01 no by lot, location :wheel shop bay 3 (image attached)

CTN :44937661

04 May, 2026 21.18 Lacs

Lucknow - Uttar Pradesh

Tender For supply of ot equpment - vertical autoclave (q2) , patient trolly , vacuum extractor , forceps obstetrics , hysterectomy set , labour table , electrocautery machine , blunt sharp curettes , dilators set hegarshawkins , uterine sound , vulsellum , sponge holding forceps , kochers forceps , artery forceps long short mosquito , scissors different size episiotomy scissors , cord cutting appliances , intrauterine contraceptive devic removing hook , trolley , yoni dhoopan yantra , yoni prakshalan yantra , humfree field analyzer , nitrous oxide cylinder , hydrolic o t

Central Government/Public Sector

CTN :44799438

20 Apr, 2026 NA

Multi City - Uttar Pradesh

Tender For auction sale of others - scrap miscellaneous items (1)computer set,make-santron,01no (2)computer set,make-hcl,01no, (3)bone file, 01no (4)intestinal clamp(crushing),01no (5)urethral forceps,01no(6)retractor checker,01no (7)bunzamin catheter (metal),01no(8)membrane perforator,01no(9)cusco's vaginal speculum,03nos (10)e.n.t. syringe (metal),01no(11)aural insufolater, 01no(12)tonometer,01no(13)con any t pices,02nos, (14)triphine 2 needle,01no(15)3-way cock similer, 02nos,(16)spinal & local anaesthesia,01no(17)funnel e/i,01no (18)kockers (straight),07nos (19)artery forceps curved 6 inch,06nos (20)tissue forceps,03nos (21)cranio perforator,01no (22)automyser,01no (23)michael clip applicator & remover,01no (24)curtator uterine biopsy foreps,01no (25)finger saw,01no (26) spinal anaesthesia needle,12nos (27)direct probe,01no (28)multiple vulsellum,01no (29)harrie lip traction bow dennis,01no (30)harrie lip forceps screw,01no (31)con cube union,01no (32)con raw button,01no (33)con magils set sudin,01no (34)triphine her slays handle,01no (35)uterine dressing forceps,01no (36)dressing trolley instrument,01no (37)bowel e/i,05nos (38)bucket steel cover drum,01no (39)b p handle,01no (40)mucous sucker,01no (41)green army chet forceps,02nos (42)stool steel revolving,01no (43)cranioplast,01no (44)hook,06nos (45)rib shear, 01no (46)pinch cock,01no (47)apparatus kockers,02nos (48)probe big,02nos (49)gorget testa,01no (50)saw big,01no (51)bobe cutting forceps,01no (52)sharp and blunt uterine cureter,01no (53)single toothed valsellum,01no (54)breach hook blunt crochel,01no (55)d c capillator,01no (56)curved scissor big,01no (57)michael clip carrier,01no (58)x ray view box,01no (59)torch,01no (60)air tube,08nos (61)operatus kersher,01no (62)ent syringe,01no, (63)nelson inhaler,01no (64)patromax,04nos (65)torch 3 cell,05nos (66)harrican (laltain),01no (67)degchi (brass) with 06 covers,07nos (68)lota,07nos (69)pulse oxymeter,03nos (70)weight machine,01no (71)weight machine,01no (72)cardiac monitor,make-bpl,06nos (73)breathe analyser,make-e d classic,01no (74)emergency resuscitation kit,make-medisys,01no (75)embalming gun,make-webcom,01no (76)spin mop machine,01no (77)aluminum kettle,06nos (78)feeding cup,34nos (79)urinal male e s,03nos (80)tray enamel,25nos (81)nelson inhaler (china clay),02no (82)sputum cup,10nos(83)calling bell,01no (84)fogging machine,make-faith micro solution,01no (01-84)location-drh/ddu, note- total materials weight in lot-(fe-59.26kg, cu-0.64kg, ss-0.60kg, al-2.70kg, brass-45.5kg, plastic-53.3kg, enamel-7.85kg)

Central Government And Public Sector

CTN :44801302

23 Apr, 2026 NA

Nagpur - Maharashtra

Tender For supply of sterile disposal syringe 3 ml with needle size 23 x 1''with isi mark[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Central Government And Public Sector

CTN :44801304

23 Apr, 2026 NA

Nagpur - Maharashtra

Tender For supply of polyethylene garbage bag for bio medical waste disposal of thickness: 120- micron, size: 40 inchx38 of red, yellow, blue and black colour[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ]

Vulsellum Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors