Get complete information related to latest Wagon Spares Scrap Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Wagon Spares Scrap Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Wagon Spares Scrap Tenders.
Tender For auction sale of depot ferrous scrap - ferrous melting scrap of perforated plates/sheets of sorts & sizes of thickness more than 05 mm , chequered plate,shim, shoe type pieces, ,tit - bits, u type welded cut pcs of bar etc. weight. is in approx . if any plate of size more than 2x3 feet is found will be separated and segregated which is ensured by witnessing staff and same will not be delivered to the purchaser .gas cutting is allowed for loading purpose only subject to the following condition: purchaser should ensure that availability of all fire extinguisher, sand, water bucket etc at delivery point. witnessing staff should be present while gas cutting is in progress . gas cutting should be done on concrete floor . while delivery if any non similar or non ferrous item is found which is not pertaining to this lot will be separated and segregated which is ensured by the witnessing staff and it will be ensured that same is not delivered to the purchaser remark photograph is available on ireps. note: purchaser to submit power of attorney (poa) in uploaded format on ireps portal (purchaser can reach the said poa format in ireps through " document -> view & publish depot condition -> click for blw /gsd dlw document list -> action (view condition) ")
Tender For auction sale of depot ferrous scrap - scrap rail part fittings such as tie bar, gauge tie plate, b/plate, check rail b/plate, m. s plate, fish plate, round spike, dog spike, ms st key, bolt off size, pulling rod, p-way fitting etc and other similar item . weight is in approx. photographs is available on ireps. note: purchaser to submit power of attorney (poa) in uploaded format on ireps portal (purchaser can reach the said poa format in ireps through " document -> view & publish depot condition -> click for blw /gsd dlw document list -> action (view condition) ")
Tender For auction sale of depot ferrous scrap - ms melting scrap consisting of unservicible nut bolts screw rivets clip small pieces of angle channel plate fish plate, anchor link parts roller, bearing plate, chair plate, p-way melting scrap, bracket equlizing stay equiling leavers, pandal clip, pin and c&w head small pcs. of tie bar fish plate, pull rod, pendol clip cotter key, hooks, bearing end cap, dog spike slide chair steel key lower spring sheet, breckets, enhance front cover small mg sheet spare part of wagon coaches, new rejected scrap received from rejection section, and other various type of miscellaneous melting scrap received from various department unfit for rly use lying in two stacks one in plot no. 02 other in plot no. 06 bin near oil shed. [gst 18% hsn 72044900]
Tender For auction sale of depot non ferrous scrap - aluminium scrap consists of aluminium scrap like aluminium door, pipe, ladder, wire, window, aluminium coach window, chequired sheet plate, plain sheet, dom cover, air break dv, aluminium diesel, loco part, electrical/electronics part cut up part aluminium water tank mirror frame and other various type of similar aluminium items with or without ferrous attachment lying in two stacks, one in godown no. 14 and other in plot no. 5 near oil shed. (cold cutting allowed to remove ferrous and other attachment) [gst 18% hsn 760200 ]
Tender For corrigendum : auction sale of depot ferrous scrap - lot no.y.mms.exmp.u-1.04.26.03 description- mixed ferrous melting scrap amalgamating the various type consisting of scrap classes like- fresh plate & sheets plate cuttings and shearing of all shapes and sizes structural sections.scrap low phosphorous steel .iron pipes .bar fittings .buffer cases and plungers (other than cast steel ) sleeves and spindles with heads .tie bars .all types of equilising beams & centralize beams , wire and fish plate other than cast steel.wire,bmbs cylinder wire & wire rope,all types of chains, all types of sleeper, shock absorber, all types of bars & rods.junk kutchra, spring wire , screw couplings, steel fabrication and misc, nut bolt,grease seal etc. as in the lot (above item may or may not be available in the lot) [loading will be done by purchaser's own arrangement]
Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.
Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.
Tender For auction sale of pway scrap - condemned and unserviceable cl.iii ms scrap consisting of ms plate - 11 nos, switch guage tie plate - 22 nos, ms bolts and nuts of sizes - 2427 nos, stretcher bar - 64 nos, special bearing plate - 242 nos, fish plate 60 kg - 40 nos, bend fish plate 52 kg - 108 nos, joggled fish plate 52 kg - 7 set, c clamp for jfp - 92 nos, slide chair cl-iii - 609 nos, plate screw cl-iii - 3413 nos, ms tie bar - 67 nos, ms cotter - 426 nos, steel key - 369 nos, fish plate 52 kg 1 m long - 34 nos, fish plate 52 kg - 62 nos, metal liner - 3440 nos, combination fish plate of sizes - 40 nos. s.1539 no. 991904 dated 02.06.2025, qty. - 28.320 mt