Latest waiting chair Tenders | Government waiting chair Tenders

State Government

CTN :45707698

03 Jul, 2026 79.2 Thousand

Rewari - Haryana

Tender For supply of basic furniture for sub divisional engineer horticulture office hsvp rewari -supply of office main chair with revolving heavy seat & back seat quality hydraulic 01 no. office visitor chair with heavy structure with pipe cushton 04 nos., computer chair revolving 01 no. office table with both side drawer and heavy locking system 5' x 2.5' 1 no. office table size 5' x 2.5' with locking system and one side drawer 1 no including loading unloading carraige complete in all respect etc.

CTN :45737807

21 Jul, 2026 NA

Delhi - Delhi

Tender For supply of revolving chair , modular table , cantilever office chair ms frame , file storage cabinet , cantilever office chair , revolving chair having tiling mechanism , executive table , cantilever office chair with ms frame , revolving chair with locking arrangement , cantilever office chair with ms frame with cushioned , cabinets large made of waterproof , sofa set 3 seater exclusive catalogue , sofa sete 1 seater , center table glass , 15 seater , 30 seater , steel bookcase , modular table made of waterproof , round marble dining , circular cafetria , wooden podium , student writing pad , rectangular ss table , fiber rainforced , magnetic white dry , sofaboard core material , laboratory steel f , mild steel heavy duty , reception table for office revolving chair having tiling mechanism with locking arrangement and gas lift, hydraulic cylinder and wheel with 5 casters roller wheel upholstered in superior quality cloth fabic/ leather foam., modular table made of waterproof 19mm thick commercial board with 1.00mm thick laminate table/0.4mm teak venner with drawers and shutter and keytray and including all hardware fittings with complete duly melamine polish. size: 8'x4', ms frame with cushioned seat with pin hole rubberized/pu cushion covered with superior quality cloth/leatherette of approved design, quality and shade finished with fine quality., file storage /cabinet made of waterproof 19mm thick commercial board with teak wood beeding on all edges. the outer surface will be finished with 1.00 thick sunmica/0.4 mm thick teak veneer of approved colour and shade appropriate colour with locking arrangement having shelves and all necessary hardware fitting finished with fine quality melamine polished * /bid number : gem/2026/b/7727045 + /dated: 30-06-2026 ' ' / bid document 1 / 34

CTN :45739069

15 Jul, 2026 NA

Srinagar - Jammu And Kashmir

Tender For supply of workstation table , l shape workstation table , high back chair with neckrest , main table with eru and pedestal , high back chair without neckrest , visitor chair , main table with eru , office table , modular conference table 21 seater , modular meeting table 8 seater , classroom chair with individual arms , classroom chair with desklet , reception table l shape , rovolving mid back chair , waiting chair 3 seater , sofa set , coffee centre table , corner side table , treatment bed , modular conference table 10 seater , modular conference table 25 seater , mid back chair , king size bed , single bed , bed side table , canteen table 4 seater , canteen chair , storage unit 4 door , 2 seater sofa , desk table , work table , study cpu table 3 seater , single bed steel , bed side table steel , canteen table with ss top and ss stools , 3 seater sofa , bunk bed

CTN :45140861

01 Jul, 2026 NA

Patiala - Punjab

Tender For bid to ras corrigendum : supply of boq furniture d d - steel almirah / cabinets (v4) (q2) , charpoy ip hard top fd no map ii 01 , table dining six persons fd 273 , cabinet filling four tier fd tp , almarih mess utensils fd 93m , rack riffle for 12 rifles fd tp , bed hard steel fd e6 map 08r , chair dining fd 279 , table peg fd 384 , hat stand with mirror fd 233 , book case steel fd 1028 , chair barber with adjusstable neck fd tp , small steel half hanging half shelves fd 114m , book case small fd 237 , chair dining map fd map ii 04 , pvc recepticle 20 ltr fd e6 map 13 , chair easy cushioned fd 358 , chair verandha fd 256 , chair school with hand rest fd e6 map 05 , sofa set four seater with cushion fd 281 , sofa set five seater with cushion fd 281 , table dressing ladies including stool dressing fd map , teapoy verandha fd map 17 , table bed side fd e6 map 15 , teapoy wooden fd 278 , bath mat pvc e6 map 07 , rack shoe steel fd e6 map 02r , table dressing gents with mirror fd 230 , side board fd 241 , table computer fd e6 map 03 , bin linen multipurposes fd e6 map 09 , table dining 8 persons fd 237 , table writing fd 275 , chair computer fd 06 map 01 , chair writing map fd e6 map 12 , metal waiting chair 03 seater fd tp , locker bed side steel fd 1029 , almirah medium steel fd 1032 , table center two tier with glass top fd tp ) /bid number : gem/2026/b/7520830 * /dated: 09-05-2026 & & / bid document 1 / 34

CTN :45253273

01 Jul, 2026 NA

Bhopal - Madhya Pradesh

Tender For bid to ras supply of copper alloy gate valve for waterworks purpose (v2) conforming to is 778 (q3) , rotational moulded polyethylene water storage tanks (v3) conforming to is 12701 (q3) , ready mix plaster 40 kg bag , gi wiremesh of standard width each roll 15 mtrs , plywood bwr grade 12mm thick 7ft by 3ft , cushion 560by530by100mm of 40 density cool foam covered with zip tapestry cloth , hydraulic door closer , sluice valve 200mm cast iron , gi pipe 50mm , epoxy based zink phosphate primer , cushion for chair dining of size 450by450mm covered with zip tapestry cloth , plywood bwr grade 12mm thick 8ftby4ft , gi pipe 25mm medium gde , ms wire mesh of standard width as per sample , curtain rod 3 mtr length 25mm dia , gi pipe 40mm medium gde , ball cock with rod and ball 20mm float valve , liquid water proofing compound dpc , gi pipe 20mm medium gde , sluice valve 100mm cast iron , ball cock with rod and ball 15mm float valve , sluice valve 150mm cast iron , gi pipe 80mm medium gde , ball cock with rod and ball 25mm float valve , plywood bwr grade 12mm thick 6ftby3ft , butt hinges 100mm aluminium alloy anodise , gi pipe 15mm medium gde , m seal , sluice valve 80mm cast iron , tower bolt 150mm aluminium anodised barrel , oil putty for window glass fitting ) /bid number : gem/2026/b/7481230 * /dated: 19-05-2026 & & / bid document 1 / 40

CTN :45713118

07 Jul, 2026 NA

Ramgarh - Jharkhand

Tender For supply of executive table size 1800 x 900 x 750 , executive table size 1500 x 750 x 750 , computer table size 60 x 120 x 78 , executive revolving high back chair , executive revolving mid back chair , executive revolving with ergonomic mesh office chair , high back cushioned revolving chair , fixed visitor chair with cushioned upholstered back , non revolving chair , revolving computer chair , 3 seater waiting chair

CTN :45691072

09 Jul, 2026 NA

Bilaspur - Chhattisgarh

Tender For e – tender for the purchase of medical equipment and furniture for statecancer institute, koni, cims bilaspur (c.g.), government of chhattisgarh(2nd call) - secretariat /executive office , table-rectangular, , executive, , &revolving chair with high back, , executive &revolving chair with high back-ergonomic chair, executive office table with side, , storage-rectangle/l shape, , executive &mesh-revolving chair with arms & mid back, , revolving chair, , special sofa 3, , seater- tubular steel, , rectangular-modular centre table with glass top, computer table with printer/copier/fax combination desk, , wall mounted & over head chamber type wooden wardrobe, registration desk(01 no) & window display cum counter rack- customized with all locking system- customized, round wastepaper basket, made of steel, , white board(pt notes), , notice board, , whatnot/corner shelf, , clock, 12" diameter. round surface, , composite office desk, pvc wall decor, , ot table (hydraulic) side end control, , medicine trolley with 4 drawer, airway crash cart -abs, , cardiac table, , writing board, , monitor trolley, , stretcher trolley, cylinder trolley, , multipurpose trolley for luggage etc., , trolley platform, , stand saline cum irrigator, adjustable, , two foot step, revolving stool, , dressing drum (03 sizes) kit, , kidney tray s.s (03 sizes) kit, , catheter tray s.s. (02 sizes) kit, , shoe rack-l size, , medical/ infectious waste bin kit w/lid, sterilizer/autoclave( horizontal) with accessories, , sterilizer/autoclave (vertical) with accessories, , kick bucket, board room table-u shape/modular conference table, , digital clock/led kiosks, , token display, , attendant stool, , bed side table with one box and one drawer(clinical cabinet), trolley mayo's, , vinyl fooring/epox floor & ot wall paneling

CTN :45689856

06 Jul, 2026 NA

Thiruvananthapuram - Kerala

Tender For procurement of misc maint stores - aluminium aldrop or sliding bolt 200mm , aluminium sliding door bolt 250mm , aluminium aldrop or sliding bolt 300mm , aluminium curtain rod 20 mm , aluminium curtain bracket fancy type 25 mm , cp curtain rod bracket 25 mm , u clamp for 20 mm dia gi pipe , u clamp for 25 mm dia gi pipe , ms triangular corner bracket 25 inch , aluminium hydraulic door closer 6 inch right , aluminium butt hinges 75 mm , mild steel halical door spring 300 mm , mildsteel piano type butt hinges 20 or30 mm x6 feet , cpvc ball valve half turn 25 mm , cpvc ball valve half turn 40 mm , upvc float valve 25 mm , cabinet mirror 450 x 350 mm , corner glass shelf , glass shelves for bath room , cp toilet paper holder , cp towel ring , cp soap dish tray , cp waste coupling 32 mm dia for kitchen sink , mortice lock 100 mm and key , cp over head shower 120 mm , ewc seat cover with hinges , pvc low level flushing system 10 ltrs cap , ss plate rack of size 36 inch x 45 inch x 10 inch , pvc squire shoe , pvc shoe for chair verandah , gi bend 50 mm , gi tee reducer 25 mm x 50 mm , gi pipe med grade isi marked 50 mm bore , ss wire mesh 0.36 mm dia , nylon washer , ms wire mesh 1200 mm wide , hack saw blade , upvc end cap 15 mm , upvc end cap 20 mm , upvc end cap 25 mm , upvc end cap 32 mm , cpvc elbow 15 mm , cpvc elbow 20 mm , cpvc union 25 mm , upvc union 20 mm , upvc union 25 mm , upvc elbow 15 mm , upvc elbow 20 mm , upvc elbow 25 mm , upvc elbow 32 mm , upvc elbow reducer 15mm x 20 mm , upvc elbow reducer 25mm x 20 mm , upvc socket 15 mm , upvc socket 20 mm , upvc socket 25 mm , upvc socket reducer 20mm x 15mm , upvc socket reducer 20mm x 25mm , upvc tee 15 mm , upvc tee 20 mm , upvc tee 25 mm , upvc tee reducer 25mm x 15mm , upvc fta adaptor 20 mm , cpvc mta adaptor 20 mm , upvc coupling 15 mm , upvc coupling 20 mm , upvc coupling 25 mm , upvc coupling 32 mm , cpvc tee 15 mm , cpvc tee 20 mm , cpvc tee reducer 25 mm x 20 mm , upvc bush reducer 15 mm x 20 mm , pvc pipe 20 mm , upvc pipe 15 mm , upvc pipe 25 mm , upvc pipe 20 mm , upvc pipe 40 mm , adhesive for upvc pipes , solvent cement 118 ml , soda ash , sodium hypochlorite , calcium hypochlorite granules , aluminium potassium sulphate , bleaching powder , glass pane 24 inch x 18 inch x 4 mm , looking mirror 600 x 400 mm , ptmt connection pipe 900 mm , pvc waste pipe 32 mm dia and 750 mm for wbh , cutting abrasive wheel for angle grinding , sand paper wheel 4 inch 60 nos , sand paper wheel 4 inch 100 nos , paint brush 75mm width , paint roller 100 mm , paint roller 75 mm , paint roller 25 mm , drill bit 2 mm , drill bit 3 mm , drill bit 4 mm , drill bit 5 mm , drill bit 6 mm , drill bit 8 mm , jumper bit 6 mm , jumper bit 8 mm , packing cloth 150 cm wide , taflon tape , ms panel pin or nails 25mm , ms panel pin or nails 20 mm , pvc gittior rawl plug , adhesive s h paste , adhesive s r paste , pvc seat for chair verandah , pvc moulded seat for chair dining , foam cushion 50 mm wide , foam cushion 40 mm wide for dining chair offr , foam cushion of size 22 inch x 21 inch x100 mm thick having 40 d , knob for drawer with screw , looking mirror 1220 x 380 x 5 mm for table dressing ladies , mirror for table dressing gents 1115 x 510 x 5.5 mm , gi concrete nails 75 mm , nail wire gi 20mm , nail wire gi 25mm , nail wire gi 40mm , nail wire gi 50mm , nail wire gi 60mm , nail wire gi 150mm , prelaminated particle board 8 feet x4 feet x18 mm , plywood bwr 8 feet x 4 feet x 4mm , plywood bwr 8 feet x 4 feet x 6mm , plywood bwr 8 feet x 4 feet x 9mm , plywood bwr 8 feet x 4 feet x 12 mm , plywood commercial 6 feet x 3 feet x12 mm , plywood commercial 8 feet x4 feet x 8 mm , mdf board 8 feet x 4 feet x 12 mm , mdf board 8 feet x 4 feet x 18 mm , ply ost 8 feet x 4 feet x 6 mm , gi elbow 32 mm 3 way , sand paper various grade , steel wood screw 15 mm x 6g , steel wood screw 35 mm x 6g , steel wood screw 35 mm x 7g , steel wood screw 45 mm x 8g , steel wood screw 50 mm x 8g , steel wood scr

Central Government And Public Sector

CTN :45685949

06 Jul, 2026 21

Yadgiri - Karnataka

Tender For procurment of hospital furnitures to yims yadgiri - bed side lockers-., iv stand.-, crash cart-., revolving stools.-, x-ray view box.-, table (nurse table) bigsize, cusion chairs, plastic chairs.-, steel alamira cupboard, staff lockers, steel dressing bin medium size 8x8 size, steel dressing bin medium size 11x9 size, dressing bin big size.15x12 size, dressing trolly, drug trolly, dressing tray steel, back rest-., strechers trolly, wheel chair-., cardiac table30, patient waiting chairs set of 3

State Government

CTN :45685523

08 Jul, 2026 44.62 Lacs

Bharuch - Gujarat

Tender For providing and supplying furniture for iti valia, dist.bharuch - providing and supplying high-back chair with a durable metal framework, upholstered with artificial leather/leatherette and molded pu foam. the chair shall include molded seat and back covers, with the back foam ergonomically contoured to provide lumbar support for enhanced comfort. the chair shall be equipped with high-durability casters and a hydraulic system. it must feature a gas lift cylinder with a minimum 5-year warranty. the overall dimensions of the chair shall be approximately 53 cm (w) x 79 cm (h) for the back, and 51 cm (w) x 49 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall have one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism allowing 360° rotation, 12° seat tilt, and 19° back tilt with a front pivot for tilting, ensuring the user's feet remain on the ground for added comfort. additional features shall include tilt tension adjustment, static seat depth adjustment of 0.5 cm, 5-position locking system, and an anti-shock back mechanism to prevent sudden impact when the backrest lock is released. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying medium-back chair with a durable metal framework, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam. the chair shall include molded seat and back covers, with the back foam contoured to provide lumbar support for added comfort. it shall have high-durability casters and a hydraulic system with a gas lift cylinder having a minimum 5-year warranty. chair dimensions shall be approximately 47.5 cm (w) x 58 cm (h) for the back, and 49 cm (w) x 48 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the chair shall include one-piece armrests that are scratch and weather resistant. it shall be equipped with a permanent contact mechanism offering 360° rotation, pneumatic height adjustment, 17° maximum tilt, and tilt tension adjustment. it shall be confirmed and approved in advance by the architect, along with a description and image, or as directed by the engineer-in-charge. , providing and supplying law back chair for work center & other staff the seat & back are made of m.s frame work. upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, together with molded seat & back covers. the back foam should be designed with contoured lumber support for extra comfort. caster of high durability & hydraulic. the chair should have cylinder with 5 years warranty. the size of chair 45cm x 45cm (back side) and 45cm x 43cm (seat size). the pu foam should be molded with density =45 ± 2 kg/m3 .with one piece armrests. the armrests are scratch and weather resistant. the permanent contact mechanisms is designed with 360° revolving type, with pneumatic height adjustment & 17° maximum tilt only & tilt tension adjustment facility. complete as per sample approved and as directed by the architect and approved by the engineer in charge , providing and supplying visitor or guest chair with seat and back made of 12 mm thick hot-pressed plywood, upholstered with changeable fabric upholstery covers (as per requirement) and molded pu foam, along with molded seat and back covers. the back foam shall be contoured to provide lumbar support for enhanced comfort. the chair dimensions shall be approximately 45 cm (w) x 38 cm (h) for the back, and 45 cm (w) x 43 cm (d) for the seat. the pu foam shall be molded with a density of 45 ± 2 kg/m³. the armrests and legs shall be fabricated from powder-coated mild steel (ms) structure as per architect's selection. the seat and back shall be securely fixed to the ms structure using all necessary hardware. it shall be confirmed and approved in advance by

Waiting Chair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

State Government