Latest wall cladding Tenders | Government wall cladding Tenders

CTN :45457878

17 Jun, 2026 3.36 Lacs

Subarnapur - Odisha

Tender For new ib building at sonepur_building - finishing wall with weather coat of approved quality two coats to give an even shade with brush to outside wall surface after cleaning surface including cost of paint watering and curing cost conveyance and taxes of all materials and labour,cess with t&p required for the work etc. complete in all floors., providing and fixing chequred tiles in floors, treads of steps and landing on 25mm thick bed of cement mortar (1:1) (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shade of tiles including rubbing, polishing including cost of tiles, conveyance, taxes & labour, t&p and cess etc. complete in all respect as per specification and direction of the engineer-in-charge., 32mm piasal wood or local teak wood panelled shutters moulded panels with all labour, iron fittings, and wooden hinged cleats etc fitted and fixed complete in all respect. but excluding the cost of iron fittings., providing, fitting & fixing up partition walling oel aluminium anodised section no. 9210 and 9207 as single groove and double groove respectively as horizantal and vertical member and oel section 4660 as tapered clip for fixing up 12mm thick prelaminated board (nova pan make) and jointing angle no.1855 etc.(12mm thick novapan prelaminated bead), fly ash brick masonry in c.m (1:6) including cost conveyance royalty of all materials., providing 12mm thick cement plaster (1:6) over the brick masonry walls including all cost of the materials, carriage, royality,alltaxes and all labour involved for completion of item of work as per the direction of engineer-in-charge., providing c.c. (1:2:4) using 12mm size hard granite crusher broken chips including all cost carriage royality taxes and all labour involved for the completion of item of work as per direction of engineer- in - charge., dismantling and removing doors, windows and ventilatoras including removal of frame,hinges and stacking the same for re-use and removing the debris within 50mtr lead etc complete., supplying, fitting & fixing of window (sliding type made up alminum section) 151-154,151-155, as windows frame section no.151-155, 151-153 nad 151-167 as shutter framw with 5mm thcik black glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour t & p etc complete as per direction of enginner -in charge., providing , fitting & fixing of al. door with oel anodized al. door section of 9202 aas vertical member, 9201 as top member and 9200 as bottom and middle member and 6mm plain glass in top portion with 12mm thick prelaminated board in botttom portion fixed on door frame by means of tapered clip no.4660 and frame to be completed bt means of jointing angle no.1855 including all cost of labour t & p hire charges of drilling machine labour charges etc complete.

CTN :45451265

19 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For tender for supply of truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , partition truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , main column of rhs 122 x 61 x 3.6 mm 9.67 kgs per rm , side column for steel door of rhs 122 x 61 x 3.6 mm (9.67 kgs per rm) , 2.825m length each , runner front and back side length 3660mm , runner partition or gable end length 6100mm , runner front and back door sides length 2450mm , purlin of rectangular steel hollow sections of size 96mm x 48 mm x 4.0 mm (8.22 kg per rm) with 6mm thick , ms extension purlin shall be of 450mm long fabricated out of rectangular steel hollow sections , 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1500 x 450mm for window , top runner shs 45x45x2.9 mm steel sections , ms sheet top and bottom u channel 3000mm length , false ceiling supporting angle ms 65x65x5 mm , for wall pre-painted gi both sides , tongue and groove , for ceiling- pre-painted gi both sides , tongue and groove , ppgi outer corner flashing 200x200x3050mm , door flashing of size 100x100x2700mm , door flashing of size 100x100x1500mm , window flashing of size 50x50x1100mm , ppgi ridge cover 450x450x3050mm , ppgi inner corner flashing 100x100x2700mm , (colour white) , ppgi inner corner ceiling flashing 50x50x3000mm (l shaped) , ppgi camouflage roof sheet 4000x1060mm x 0.63mm , ppgi camouflage wall cladding sheet 3050x1060mm x 0.63mm , ppgi camouflage for inner partition wall cladding sheet , polycarbonate roof sheet 4000mmx1060mm x 3 mm , ppgi camouflage for gable wall cladding sheet 3000x1060mm x 0.63mm , ms foundation bolt 16x450mm , ms nut and bolt 12 x 40 mm , ms nut and bolt 12 x 100 mm , ms nut and bolt 16 x 50 mm (connect of truss and purlins) , ms nut and bolt 10x75 and washer for fixing of sunshed , gi self tapping screw 75mm (for fixing panel with coln) , gi self tapping screw 25mm (for fixing of inner flasing) , gi self tapping screw 50mm (for fixing of roof sheet) , double shutter steel doors will be provided in each store shelter as shown in the drawing. , windows in each shelter will be provided. window size will be 1.20m x 1.20 m with two vertical panels , one insulated puf door shutter with aluminium frame of suitable size shall be provided complete with pressed steel or u-channel frame , one fixed glass window of size 2.00m wide x 1.20m high shall be provided complete with ms frame , necessary cleats , rubber beading and transparent glass of minimum 5mm thickness , padlock with 7 levers 50mm , with 3 nos spare key. , silicon sealant 280 ml , manufacturing sand (m- sand) confirming to is 383-2016 , crushed stone sand category. , stone aggregate to be crushed rock or gravel 20mm graded conforming to is 383-2016 , stone aggregate to be crushed rock or gravel 40mm graded conforming to is 383-2016 , common burnt clay building bricks sub class b modular size designation 75kgf per cm2 , best locally available with sharp corners , non skid ceramic tiles of size 400 x 400 x 7-8mm conforming to is 15622 2017 , glass dividing strips 40x4mm , prefabricated foundation reinforcement type f-2 made of 12 mm & 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups us as per drawings , steel form work -type -2 -steel form work material for columns of size 0.3 x 0.3 x 0.9m and columns footing of size 0.9 x 0.9 x 0.3 m ( type f-2) made out of 3mm thick ms sheet , lightning conductor confirming to is - 3043 - 2018 with all accessories , pvc ceiling rose 2 or 3 terminal. , led tube light fitting complete 4 feet long 18 watt tube rod and electronic ballast , xlpe insulated pvc seathed (heavy duty) armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage up to and including 1100 volt ,

CTN :45408747

09 Jun, 2026 43.64 Lacs

Karnal - Haryana

Tender For special repair to cipet campus, murthal, distt. sonipat (haryana) sh:- repair & finishing work of diploma block, b.tech block, boundary wall, footpath & rain water harvesting etc.

State Government

CTN :45446786

24 Jun, 2026 68.77 Lacs

Delhi - Delhi

Tender For water proofing treatment, boundary wall repairing, plinth protection, plaster work, seepage treatment, platform for water tank, exterior finishing work and others repair work at botany department, university of delhi

State Government

CTN :45443417

08 Jun, 2026 NA

Kurukshetra - Haryana

Tender For shamaspur block: thanesar panchayat: samaspur dist.: kurukshetra annual maintenance work for water supply. -finishing wall with cement based wall putty and exterior acrlic paints including scrapping existing paint.( rate for one sq mtr ) / at site rural area

State Government

CTN :45443421

08 Jun, 2026 NA

Kurukshetra - Haryana

Tender For ghamoor kheri block: thanesar panchayat: ghamoor kheri dist.: kurukshetra annual maintenance work for water supply - finishing wall with cement based wall putty and exterior acrlic paints including scrapping existing paint.( rate for one sq mtr ) / at site rural area

Central Government And Public Sector

CTN :45457465

15 Jun, 2026 4.24 Lacs

Bijnor - Uttar Pradesh

Tender For essential civil repair works and external finishing to type v staff quarters including boundary wall at sanchar vihar colony bairaj road bijnor.

CTN :45439992

19 Jun, 2026 10.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of wooden paneling work for 12 by 10 room , tiles flooring complete material and finishing , aluminum work for front elevation and windows , electric wiring lights and electric accessories , curtains matting and interior finishing , exterior surface treatment and protective coating work , wooden paneling for front elevation including ladakh design , cupboard almirah and wooden shelves installation , pv paneling for rear wall , aluminum door installation , labour charges installation and final finishing

CTN :45448738

15 Jun, 2026 2.00 Lacs

Barmer - Rajasthan

Tender For supply of welding electrodes , self-screw 1.2 inch , self tomy screw 1 inch , cutting wheel 4 inch , 1 inch x 1 inch square pipe 18 ft , 1.5 inch x1.5 inch square pipe 18 ft , 1 inch x1 inch angle 18 ft , welding holder 3 phase , self-screw bit , paint brush 2 inch , paint brush 3 inch , paint brush 4 inch , paint red , paint yellow , paint og , paint blue , paint golden , paint silver , thinner , paint roller small , paint roller large , plywood 19 mm 8 x 4 ft , plywood 12 mm 8 x 4 ft , plywood 06 mm 8 x 4 ft , sand paper no 120 , fevicol , wood filler , finishing patti iron , primer , nails 1 inch , nails 1.5 inch , nails 2 inch , nails 3 inch , nails 4 inch , synthetic sponge , wall putty , star screw 1 inch , star screw 2 inch , star screw 2.5 inch , 13 inch cutting blade , blade saw 12 inch round , wooden stainer rose wood 100ml , wood stainer teak wood 100ml , wood stainer natural 100ml , wood stainer yellow wood 100 ml * /bid number : gem/2026/b/7594490 + /dated: 05-06-2026 ' ' / bid document 1 / 35

CTN :45432378

26 Jun, 2026 NA

Srinagar - Jammu And Kashmir

Tender For supply of providing and fixing walnut wood door for banquet hall including all necessary fittings fixtures holdfasts locking arrangement , providing and fixing computerized paper machie decorative panel work at rest room entrance of banquet hall including complete artistic finish , providing, installation testing and commissioning of 100 watt electric jars light fittings , providing and fixing focus lights for banquet hall including complete fittings , providing and fixing decorative focus leaf light accessories for banquet hall , providing and fixing horizontal blinds of approved make and shade , providing and fixing standing brass mirror for banquet hall of size approximately 5 height including complete frame , providing and laying carpet runner for central stage measuring , providing and fixing 18 mm thick hdhmr board paneling , providing and applying pu polish on wooden surfaces including surface preparation, rubbing, primer coat , providing and applying pu polish in vip rooms on wooden surfaces including complete preparation , removing old wall paper carefully and providing and fixing new wall paper of approved quality , providing and fixing warm electric light fittings of approved make including wiring, fixtures, holders, lamps and complete installation as per the directions of engineer-in-charge. , providing and fixing marble finish table top of size , providing and fixing profile lights of approved make, approximately 900 mm long , providing and fixing upvc finishing profile work on stairs , supply, installation, testing and commissioning of 86 inch display panel including wall mounting arrangement , acrylic boards of different sizes , providing and supplying imported two seater sofa made of seasoned hardwood , providing and supplying high back executive boss chair with hydraulic height adjustment , providing and supplying revolving office chair with cushioned seat back , providing and supplying executive recliner boss chair with adjustable reclining mechanism , providing and fixing polished marble table top , providing and fixing 3 piece executive table set of size , providing and supplying wooden front desk chair made of seasoned wood with cushioned seat , providing and supplying visiting chair , providing and fixing peg table , providing and supplying 3 seater diwan made of seasoned hardwood frame with foam cushioning , providing and fixing glass door book rack made of seasoned wood , providing and supplying side table made of hdhmr , revolving chair (v5) (q2) , chair for general purpose (q2) , modular extendable conference table (v2) (q2) , modular table / meeting table / centre table (v2) (q2) , sofa (v3) (q2) , executive table (v4) (q2)

Wall Cladding Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government And Public Sector