Latest wall paint Tenders | Government wall paint Tenders

State Government

CTN :40067750

28 Apr, 2025 10.00 Lacs

Srinagar - Jammu And Kashmir

Tender For providing of professional painting service - walls metals cemented items etc; interior walls, exterior walls, wall painting; vehicles, na, smart and dumper bins

CTN :40064178

29 Apr, 2025 NA

Mohadi - Maharashtra

Tender For providing of professional painting service - walls; wall painting; na

CTN :39574065

21 Apr, 2025 NA

Mumbai - Maharashtra

Tender For bid to ras supply of enamel, synthetic, exterior (a) under coating (b) finishing paint (v3) confirming to is 2932 (q3) , wire stainless steel wire cloth 0 34 mm nominal dia of wire and average width aperature 1 6 mm , glass corner shelve with cp bracket 10 inch x 10 inch x 8 mm , lock mortice 6 levers , latches night 7 levers , hinges butt 100 mm stainless steel , star thread screw full thread 50 mm contaning 200 nos each pack 6 x 50 , star thread screw full thread 40 mm contaning 200 nos each pack , syphon pvc for low level high level flush tank , wire mesh aluminium wire cloth 0 34 mm nominal dia of wire and average width aperature 1 60 mm , door stopper aluminum 100 mm , 20 mm bore steel water tubing medium grade g i , star thread screw full thread 32 mm contaning 200 nos each pack , hinges butt 75 mm stainless steel , easy dry 9 ft long , magiceye , hinges butt aluminium 100 mm , distemper oil bond white , halical door spring , nails 32 mm , 150 mm floor door stopper of brass body and tongue with hard drawn steel spring , 15 mm bore steel water tubing medium grade g i , aluminium windows starlock 75 mm long 1 st quality , star thread screw full thread 65 mm containingh 200 nos each pack 6 x 45 , bow handle aluminium 75 mm , nails 40 mm , nails 50 mm , haps and stapple aluminium 100 mm , 300 mm brass rat tail rod pattern springs incl roller and roller plate complete , hasps stapple aluminum 75 mm , star thread screw full thread 25 mm contaning 200 nos each pack 6 x 25 , cpvc pipe 16 mm dia and all fitting prayag , hooks and eyes aluminium 100 mm , cpvc pipe 20 mm dia and all fitting prayag cat no-ps-2 , nails 25 mm , hap and staple safety type brass with mild steel hinge pin incl bolt to hinge plate and fixed with screw 100 mm , star thread screw full thread 15 mm contaning 200 nos each pack 6 x 15 mm , glass shelf 24 inch x 5 inch x 6 mm , hooks and eyes aluminium 150 mm , hooks and eyes aluminium 200 mm , star thread screw full thread 20 mm contaning 200 nos each pack 6 x 20 mm , cement white make birla in 1 kg pack , coat hook aluminium 150 mm , hinges cp for wc seat cover make classic , pvc pipe 40 mm dia , fancy type powder coated curtain brackets , pvc handle for flush tank , brrom coconut brrom sweaping , coat hook cp brass 75 mm bid details/ 2 / 47

CTN :40055593

26 Apr, 2025 23.50 Lacs

Gharaunda - Haryana

Tender For decorative wall painting on service road and other places in mc gharaunda town.

CTN :40058173

28 Apr, 2025 2.00 Lacs

Dungarpur - Rajasthan

Tender For group d wall painting work in g.p. bhinda

State Government

CTN :39840641

30 Apr, 2025 NA

Guwahati - Assam

Tender For corrigendum : empanellment of agencies under sbm-g, assam for wall painting (multi colour) on any available govt. walls at village gp, block and district level

State Government

CTN :39849519

30 Apr, 2025 NA

Guwahati - Assam

Tender For corrigendum : empanelment of agency for executing graffitti wall painting across various sites like highways and flyovers etc. across assam as an iec component under swachh bharat mission (grameen), assam

State Government

CTN :40052969

25 Apr, 2025 45.00 Lacs

Banswara - Rajasthan

Tender For wall painting work all gram panchayat cluster 3 ps kushalgarh

State Government

CTN :40053357

28 Apr, 2025 60.00 Lacs

Dungarpur - Rajasthan

Tender For ??????? ??????? ? ??????? ??? ??? ??? ???? ????? ?? ??????? ?? ????? ????? ?????? bhinda-supply of construction material and equipment used in construction to gram panchayat bhinda- , gravel, stone masonry, kharanja stone eret first class, second class, sand / gravel, ballast (crusher & hand broken) pattis, kota stone, marble, rajnagar farshi glazed vitrified tiles, interlocking tiles, cement bricks, pvc water tank (isi mark) etc. , , cement, rods, winding wire, iron girders, conical iron, barbed iron wire, iron doors made in factory, tin shed, enamel paint, distemper, lime, etc. hume pipe 300 mm hume pipe 450 mm hume pipe 600 mm hume pipe 1000 mm hume pipe (all pipes should be isi marked) , , water tanker (4000 liters), cement concrete mixer machine, vibrator, diesel road roller 8 to 10 tons shuttering, iron plate with poles and other materials (all the materials shown in this column are to be taken on rent) , , wall painting in nrega, sbm, housing schemes ,

Central Government And Public Sector

CTN :39112820

21 Apr, 2025 NA

Damanjodi - Odisha

Tender For corrigendum : supply of 415v, utilization category ac23a, 630a local isolator cabinet in sheet steel enclosure complete with 630a, 3 pole load break switch. 2. shall be with side operated handle, padlocking facility, prebreak micro switch having 1no+1nc contact. 3. micro switch contacts shall be wired to 4 sq mm tb for external termination. 4. provision of padlock system having sufficient space to lock the isolator at off position by minimum two agencies at a time. 5. complete with both power & control circuit wiring with all insulators, bus bars and control terminal blocks. 6. detachable bottom gland plate for entry of cables from bottom. 7. front door shall be hinged and inter-locked with the isolator in 'on' position. the front door should have a minimum 3 mm thickness perspex/triplex window for observation of position of contacts. 8. isolator should confirm to iec 60364 standard. 9. the dimensional drawing of the local isolator cabinet or product catalogue showing mounting arrangement of the components should be enclosed along with the offer. 10. isolator cabinet should be provided with rain canopy. 11. any isolator parts should not be made of aluminium/aluminium alloy. 12. isolator cabinet shall be metal enclosed suitable for wall fixing using 4 welded fixations, dust and vermin proof and shall be provided with degree of protection as ip-55. 13. provision for three distinct parallel busbar per phase for termination of three nos of 240 sqmm aluminum cables for incoming and two distinct busbar per phase for termination of 120 sqmm copper cable. 14. all hardware used in isolator cabinet shall be corrosion resistant. 15. minimum clearance between the live parts and detachable bottom cable gland plate shall be 400mm. 16. cabinet should be painted with alkaline resistant epoxy paint. 17. isolator cabinet shall have provision for earthing at two separate and distinct points. 18. each isolator cabinet should be supplied with panel keys., push button station specification: 1. pbs made of 2mm sheet steel enclosure with rain canopy, protection: ip-65. 2. 01 no. of green colour start pb with 1no+1nc contacts, 01 no. of red colour stop pb with 1no+1nc contacts, 01 no.of increase pb with 1no+1nc contacts <(>&<)> 01 no.of decrease pb with 1no+1nc contacts. one emergency stop push button with 1no+1nc contacts (push to lock type) shall be provided. size of each push button is of 22.5mm diameter. inscription plate for all push buttons. 3. pb shall be wired with 2.5 sq.mm. copper wire to 40 nos. serially numbered terminal blocks (tb) of elmex make having tb-5-6, 7-8, 11-12, 13-14 <(>&<)> 17-18 shorting link. 4. two nos. of cut out of size 72x72 mm for ammeter and rpm meter shall be provided. 5. 'on','off' <(>&<)> 'trip' indication led lamps in red, green <(>&<)> amber colour respectively with inscription plate to be provided. 6. all push buttons, elements, led lamps <(>&<)> cutout for ammeter <(>&<)> rpm meter shall be on the hinged door of the pb station. 7. pb station shall be weather proof, neoprene rubber gasket suitable for outdoor application. 8. 2nos. of earthing studs to be provided. 9. left side hinged door shall be provided with flexible braided copper earthing. 10. pbs shall have 04 nos. of corrosion free bracket suitable to fix on vertical surface. 11. detachable gland plate to be provided. 12. the push button shall be painted with one coat of red oxide primer <(>&<)> two coats of zinc chromate primer and finally finished with stoving enamel grey paint. 13. the push button station shall be generally in line of enclosed drawing (fig-2). 14. party to submit the drawing along with the offer for technical scrutiny.

Wall Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

Central Government And Public Sector