Get complete information related to latest Wall Partition Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Wall Partition Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Wall Partition Tenders.
Tender For supply of prefabricated wallpartition 3800 x 2700 mm,prefabricated wallpartition 3350 x 2700 mm,prefabricated wallpartition 3600 x 3100 mm,prefabricated wallpartition 2700x 1450 mm,prefabricated aluminium window 1100 x 1050 mm
Tender For corrigendum : estimate for providing earth soil to sh. arjan singh for strengthening boundary wall of his house at village maujgarh distt. moga.
Tender For construction of culvert and addition in boundary wall base and earth filling for the cultural complex of asomiya nepali sanskriti sangrakshan nyaas at panikhaiti under untied fund (state specific scheme) for the year 2024-25
Tender For providing and supplying furniture for type - v / c bungalow at tokarkhada - providing and supply of emerald leather-pure leather center tilt mechanism, upright position lock. ai die cast pedestal (office chair), providing and supply aristo tbl 1200 x 600 (office chair), providing and supply gayle coffee table black (teapoy), providing and supply victoria coffee table walnut, providing and supply 205 wicker outdoor sofa set (model no.gc-205), providing and supply 203 wicker outdoor sofa set, providing and supplying wicker swing (zula), providing laying artificial lawm(6 mm), supplying and stacking of good earth at site including royalty and carriage upto 5 km lead (earth measured in stacks will be reduced by 20% for payment)., providing mirror polish to wooden furniture, providing and fixing 5mm mirror glass with polish, providing and fixing 5 mm bracket for glass fixing, replacing of dining chair leather with labour charges, excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead.(b) dence or hard soil, providing and laying cement concrete 1:3:6 ( 1-cement : 3- coarse sand : 6- hand broken stone aggregates 40 m nominal size) and curing complete excluding cost of framework in (a) foundation and plith, providing and laying controlled cement concrete m.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (a) foundation, footings, base of columns and mass concrete, brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinth in cement mortar 1:6 (1- cement : 6 -fine sand)(b) conventional + extra for brick work in superstructure above plinth level upto floor two level (b) conventional, providing 15mm thick cement plaster in single coat on rough (similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) cement mortar 1:3 (1-cement:3-sand), steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (a)in beams and joists, channels angles tees, flats, with connecting plates or angle cleats as in main and cross beams. hip and jack rafters, purlins conneted to common rafters and the like, providing corrugated g.i. sheet of class-3 roofing fixed with glavanished iron j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washer or g.i. limpet washer. filled with white lead complete excluding the cost of purlins, rafters and trusses.(1) 0.80 mm thick sheet., providing and fixing to wall ceiling and floor 10.0 kg. f/cm2 working pressure poluthene pipes of the following outside dia. low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(g)110 mm, providing and supplying for washing machine as approved by and engineer in charge, providing and supplying for wooden box bed (king size) as approved by and engineer in charge, providing and supplying for mattras (ortho 6") as approved by and engineer in charge, providing and supplying for side table as approved by and engineer in charge, providing and supplying for pillow as approved by and engineer in charge
Tender For supply of interior furnishing works with sitc of active led and other audio video equipment d d - dry wallpartition with internal framing with surface finishing and paint or veneer , acoustic wall panel , false ceiling , acoustic wooden door , wooden cabinet storage for 24u av rack , raised seating platform , carpet flooring , linear table , revolving chairs , lighting system , raceway conduiting system , cat 6 utp cable 305m length , 1 port square shuttered faceplate , cat 6 utp information outlet , cat 6 utp 24 port modular loaded 1u panel , cat6 utp patch cord 3m , cat6 utp patch cord 5m , cat6 utp patch cord 2m , 1u suitable cable manager inside the rack , other consumables along with rack dressing , 2 module metal back box , 245 inch active led wall with led contoller and mounting structure , windows based videowall processor and wall management software , sff mini pc with monitor with wireless keyboard and mouse , 4k hdmi extender over catx cable , vc system , av integrator license , ceiling tile microphone with mounting accessories and poe injector , audio dsp , 6.5inch two way ceiling speaker , 4k hdmi patch cable 6 ft , av control processor , lighting control dali module interface , lighting control wall mount keypad , wireless touch panel with tabletop docking station and control app , 8 port poe network switch , dual band poe wifi access point , 24u av rack with required accessories , bulk cables and connectors , supply installation testing commissioning fabrication programming and training , onsite comprehensive amc charges for 4th year for the entire av solution , onsite comprehensive amc charges for 5th year for the entire av solution
Tender For establishment of sri sri aniruddhadeva sports university, chabua in dibrugarh district, assam raising low site (earth filling), construction of boundary wall, gate, rcc covered drain, box culvert (2x2) and topographical survey works
Tender For bid to ras supply of complete stores for sentry post - main columns 04 nos gable column 04 nos are made of ms shs 70mm x 70mm x 3 point 20mm of 2750 mm long , truss 02 nos and all are made of ms rhs bottom and top chord of size 80 x 40 x 2 point 60 mm including providing one side slope , purlins 04 nos of 2400 mm long shall be made of ms rhs 60 x 40 x 2 point 60mm , runners 08 nos made of ms shs 40 x 40 x 2 point 60 mm , base frames 4 nos made of ms rhs 80 x 40 x 2 point 60 mm and length of each 2400mm , necessary pedestals are made of bottom base plate of size 300x300x6mm at the bottom , all nut and bolts with washers of size m 16 x 50 and m 12 x 50 and m 12 x 75 and m 12 x 100 and m 8 x 75 used as per requirement for base plates and connection plates for various structural members , the puf panels shall be 60 mm thick made using zero point 50 mm ppgi skins on both sides and cfc free 44 kgs bulk density plus oblique minius 2 kgs puf insulation in between , the floor panels of the shelter shall be 6mm thick ms chequered sheet , all shelter flashing shall be provided using zero point 50 mm ppgi of ral 1001 and ral 9002 as per the colour scheme , the roof slope shall be 40 deg slope and roof shall be provided with zero point 60mm pre coated pre coloured steel of green colour , ridge cover zero zero point 60 mm thick pre coated plain sheet of green colour or as approved colour matching with the roof sheet of size 2400mm long and 600 mm wide will be provided , there are total of 01 types of doors size of 2100 x 1000 x 40 mm and doors shall be provided with ms frame , windows w1 of size 1000 x 1000 mm with aluminum sliding shutters with sheet glass 5 mm thick confirming to is 2553 , sun shed 1300 x 450 mm shall be made of angle iron frames of 30 x 30 x 3mm with pre painted zero point 6mm thick ppgi ral 9002 sheet , electric hand drill machine 10mm along with screw head , drill bits 9 oblique 64 inch in packet of 10 nos , drill bits 1 oblique 8 inch in packet of 10 nos , drill bit adopter 8mm , ring spanner 14 x 15 , ring spanner 16 x 17 , d spanner 15 x 16 , d spanner 17 x 18 , rope 20 mm dia , ball pin hammer 1 kg with wooden handle , insulated electric pliers 6 inch , hack saw frame circular saw , hack saw blades , aluminium spirit level 6 feet long , pgi tool box of size 60cm x 45cm x 30cm , metal cutting and grinding machine 100 mm disc dia and gsw 750 100 and part no 06013940f0 and hsn code 84672900 , mobile single phase welding machine , welding rod , lightning conductor made of copper tube 250 mm long x 25 mm dia with five copper prongs of length 15 cm each fixed to copper ball of dia 50mm and 4mm thick with securing arrangement , earthing of building will be provided using 4mm dia 3 mtr long gi wire connecting to main board to gi earth plate , pvc casing and capping 25 mm width , led tube light fitting 18w 4 feet long , 15 amp switch and socket combination with gang box , 6 amp switch and socket combination with gang box , bulk head fitting with 9 watt led bulb , switch fuse unit 32 amp in sheet enclosure with side handle , armd cable 2 core 6 sqmm aluminium conductor xlpe insulated pvc type oblique extrucded inner sheathed for multicore cable armoured , pvc cable copper conductor 1 point 5 sqmm , pvc cable copper conductor 2 point 5 sqmm , ceiling rose , pvc gang box 4 way , star headed screws 1 inch , switch p oblique t 6 amp , batten angle holder , led bulb 9 watt , pvc gang box 6 way , pvc gang box 1 way , pvc square box 4 x 4 inch , insulation tape rolls , pvc flexible pipe for externally exposed wiring as per sample , flexible wire , mcb 16 amp sp , mcb 32 amp dp , mcb distribution box 4 way with single door , suitable flashing with zero point 6mm thick pre coated sheet of matching colour with panels will be provided at all joints between roof and wall corners , solar lantern mozda solar lantern 23cm x 14cm x 14cm , tarpaulin hdpe cover water proof 30 x 30 feet and 300gsm , keroheater warranty one year after completio
Tender For bid to ras bid to ras supply of cable joint kit (v2) (q3) , led suface fitting 36 watt 2x2 , battery for solar light180ah 24 volt , transformer oil superior quality tested for dilectric strength upto 45kv isi marked , solar gate light fitting led 12w , bamboo ladder 20 feet to 25 feet , tape insulation for ht 11 oblique 22 kv , switch plate 2 way module , frp looping box with fixing clamp with locking arrangement and cut out 16 amp 01 nos connection for incoming oblique outgoing cables of size 250 x 200 x 100mm , frp looping box with fixing clamp with locking arrangement and cut out 16 amp 01 nos connection for incoming oblique outgoing cables of size 225 x 175 x 100mm , metal clad industrial plug and socket enclosure with 2 pole earth metal plug for incorporating and including mcb sp 20 amp including top , pvc board 100x100x50 mm , cassing capping patti 1 inch x 1 oblique 2 inch , fancy wall bracket fitting with 9w led bulb , cassing capping patti 3 oblique 4 inch x 1 oblique 2 inch , frp looping box with fixing clamp with locking arrangement and cut out 16 amp 01 nos connection for incoming oblique outgoing cables of size 300 x 250 x 100 , modular white cover plate 3 module , modular white cover plate 4 module , cotton waste , plate for roma switch box 10 module , modular white cover plate 8 module , pvc board 250x200x50 mm , polymetric insulator disc type ht 22kv as per sample , pvc board 150x150x50mm , modular white cover plate 2 module , battery terminals brass as per sample , insulator pin type lt 440 volts as per sample , plate for roma switch box 08 module , lugs aluminium 25 sqmm , pvc board 180x100x50mm , pvc board 80x80x50 mm , insulator pin type ht 11 kv as per sample , switch box for roma switch for 8 module , modular white cover plate 1 module , rawal plug 100 nos box 25mm x 8g , screw metal 50mm x 8 size , screw metal 35mm x 8 size
Tender For scr construction organisation: proposed construction of road over bridges (robs) with standard rdso spans including construction of rob road approaches (viaduct and reinforced earth wall portions) and limited height subways (lhs as 1 x 6.0m x 3.0m rcc box) between various railway stations in secunderabad division of south central railway. # sw-i: rob in lieu of lc no.6 at km:355/26-28 between kazipet-hasanaparti road. # sw-ii: rob in lieu of lc no.33 at km:251/11-13 between yadadri -wangapalli. # sw-iii: rob in lieu of lc no.40 at km:291/14-16 between peddapalli - raghavapuram. # sw-iv: rob in lieu of lc no.46 at km:282/8-10 between raghavapuram-ramagundam. # sw-v: rob in lieu of lc no.49 at km:275/46-48 between ramagundam- raghavapuram. # sw-vi: rob in lieu of lc no.64 at km:381/28-30 between warangal-chintalpalli. # sw-vii: rob in lieu of lc no.80 at km:436/11-13 at mahbubabad yard.