Latest walling Tenders | Government walling Tenders

State Government

CTN :45309324

03 Jun, 2026 3.49 Lacs

Howrah - West Bengal

Tender For renovation with uc bulah pilling and drum sheet walling at maju bazar shitala mandir under uttar maju

CTN :45330412

08 Jun, 2026 2.99 Lacs

Budgam - Jammu And Kashmir

Tender For fencing walling around graveyard at bahrampora b k pora

CTN :45119356

27 May, 2026 NA

Parganas - West Bengal

Tender For bid to ras bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , supply, installing, testing and commissioning of pdb panel 800a, 415v. the panel shall be indoor wall mounted. it shall be completely made of crca sheet steel. , supply, installing, testing and commissioning of pf correction panel with rms 430kvar, 415v. panel indoor floor mounted, free standing with ip-31 degree of ip made of crca sheet steel. , material and labour for xlpe insulated, lt armoured electric sense cable with aluminiur star ded conductor 1100 volts grade, cross- sectional area 4 sqmm, 6 core , m and l for brick sub class b 250mm x 115mm x 0.75mm and laid in trenches as in protection of ug cabe complete all as specified and directed , supply and filling in and spreading unwashed river sand for cushioning and covering the uncer ground cables in trenches and punning to provide required cover , excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying cif cables, pipe lines, protection pipes , returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed , remnoving excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed , material and labour for earthing complete with copper plate electrode 600mmx 600mmx. 3.1.5 mm thick buriel directely in ground vertically , supply and fixing 25 sqmm interconnecting pvc pipe sets and pipe fittings along with suitable accessories complete all as specified and directed , civil work rcc panel base slab size - 2000mm l x 1300mm w x 150mm thickness , warranty service amc by cmc including breakdown service for 1 year to ensure the safe, reliable, and efficient operation of the electrical panel ) /bid number : gem/2026/b/7493216 * /dated: 08-05-2026 & & / bid document 1 / 19

CTN :45268390

29 May, 2026 7.28 Lacs

Pulwama - Jammu And Kashmir

Tender For repair of brick walling and other allied works at district development commissioner official residence at shopian

corporations/Associations/Others

CTN :45276552

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f

corporations/Associations/Others

CTN :45278994

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g

State Government

CTN :45221525

06 Jun, 2026 4.26 Crore

Kupwara - Jammu And Kashmir

Tender For constructon of residential quarter, boundary walling and allied works at chc kralpora kupwara (excluding boundary wall)

State Government

CTN :45275981

03 Jun, 2026 30.37 Lacs

Awantipora - Jammu And Kashmir

Tender For construction of office complex near town hall building mc awantipora. (walling and balance work) civil part.

Central Government/Public Sector

CTN :45280965

15 Jun, 2026 NA

Hajipur - Bihar

Tender For at hajipur :- repairing, painting and replacement of damaged toilet fitting, doors, windows, walling and flooring of old gm building offices and officer's chamber.