Latest warehouse repair Tenders | Government warehouse repair Tenders

CTN :45291665

12 Jun, 2026 NA

Nilgiris - Tamil Nadu

Tender For supply of tata iron fencing chain link net for fencing mesh d fence , l angel , concertina coil , flat paitta , 10mm round rod 345 nos , barbed wire 2mm thickness , bolt nut washer 12mm thickness , painting work , cement concrete using 20mm metal m sand cement , labour bush cutting and labour.

CTN :45328711

01 Jun, 2026 27.78 Lacs

Ramgarh - Jharkhand

Tender For cleaning of existing garland drains, cleaning of sedimentation pond, cutting new garland drains, provision of concrete pipe culverts and pump foundation under monsoon preparation works of urimari project, barka-sayal area.

CTN :45290770

29 May, 2026 3.16 Lacs

Ernakulam - Kerala

Tender For mla-sdf- kothamangalam lac- 2025-26- setting up of open gym equipments at ward 15, kothamangalam municipality, ernakulam district - construction of open gym, 2.6.1:earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 5.1.2:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources), 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more, 5.9.1:centering and shuttering including strutting, etc. and removal of form for:foundations, footings, bases of columns, etc for mass concrete, 16.83:taking out existing cc interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of engineer-in-charge., od289920/2025-2026:walker single- providing and fixing walker single fnf 004- minimum 100 nb gi c-class pipe- for main frame, minimum 32 nb gi c-class pipe- for leg frame, minimum 25 nb gi c-class pipe for handle frame, nylon 66 injection moulded casing clamps, lldp root molded seat with inbuilt bolts 3/8" x 1.5" foot rest, nylon 66 injection molded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80micron thickness powder coat, od289924/2025-2026:rider- providing and fixing fun rider (fnf 002)- minimum 100 nb gi c-class pipe- for main frame, minimum 32 nb gi c-class pipe for seat frame, minimum 40 nb & 25 nb c class gi c-class pipe for handle frame, minimum 32nb & 25nb gi c-class pipe with two handles for leg rest, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for foot rest & seat rest, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat., od289921/2025-2026:ski trainer- providing and fixing ski trainer- fnf 014- minimum 100 nb g.i. c class pipes for main frame, minimum 40 nb g.i. pipe for foot rest pipe, minimum 40nb & 25 nb g.i. pipe for handle, minimum 25 nb & 40 nb gi c-class pipe for connecting pipe, lldp rotomoulded seat with inbuilt bolts 3/8" x 1.5" for foot rest, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80micron thickness powder coat, od289922/2025-2026:abb trainer- providing and fixing abb trainer - fpspcl187- minimum 80 nb gi c- class pipe for main frame, minimum 32 nb gi c-class pipe for side frame, minimum 25 nb g.i. pipe for intermediate pipe, nylon 66 injection moulded bearing cap & pipe cap, fully done by first coat of primer – jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70- 80 micron thickness powder coat ., od289923/2025-2026:cycle- providing and fixing cycle - fpspcl208 - 25 nb & 40 nb gi c-class pipe for main frame, 32 nb gi c-class pipe for seat frame, 25 nb

CTN :45296154

01 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of gun pit with ohp - tmt bar fe 550 grade 8mm dia , tmt bar fe 550 grade 10mm dia , tmt bar fe 550 grade 12mm dia , tmt bar fe 550 grade 16mm dia , binding wire of 0.9mm dia , plywood 8 feet x 4 feet x 18mm bwr grade , plywood for roof shuttering 8mm waterproof , plywood for wall shuttering 14mm , scaffolding pole adjustable 7 feet long , nails 2 inch, 3 inch and 4 inch 10 kg each , pre-fabricated mild steel door of size 5300mm x 3500mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , pre- fabricated mild steel door of size 1300mm x 6000mm outer frame made out of isa 50x50x6mm and door shutter frame of isa 40x40x6mm and all as stiffner of isa 40x40x5mm as per drawing , app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg per sqm , deck sheet curved shape 1.20mm tr-50 including all necessary clamps fittings and fixtures , quick setting compound , water proofing compound in 1 kg packing , fire resistance paint for internal surface , fire resistance primer for internal wall surfaces , synthetic enamel painting to steel surfaces , red oxide primer. , bitumen 80 oblique 20 grade , hdpe pipe 75mm dia best quality , fire extinguisher a and b and c type portable net 2 kg capactiy cylindrical isi marked , supply solar lantern model no ms122 solar lantern contains battery, solar panel, led bulbs , lighting conductors set complete with all accessories as per details given , prefab steel ms plate of size 1000x1000x4mm to frame of size 1050x1050mm , hdpe hose pipe 25mm dia corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi , 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set , pcc solid block 400x200x200mm , 100mm thick interlocking tiles machine pressed precast concrete paver block , cement ppc oblique opc 53 grade in poly bag of 50 kg each , sand coarse conforming to is-383 , stone aggregate coarse 20 mm conforming to is-383 , stone aggregate coarse 40 mm conforming to is-383 , hesco basket , transparent pipe 5mm dia bore for water leveling , iron bar 600mmx16mm , industrial safety helmet , hammer weight 500 gms with wooden handle , plaster trowel with wooden handle isi marked , fish line best quality , wood cutting blades , iron cutter blades 14 inch , plumb bob iron best quality , galvanised iron pan mortar 18 gauge 16 inch dia minimum weight of 1 kg , rammer earth with handle , picks axes with chiesel and point ends , showel square nose 14 gauge tata high carbon steel , painting brush 100 mm best quality , synthetic tarpaulin 550 gsm of size 30ft x 30ft , multipurpose non-slip rubber reusable gloves , brick trowel steel 305 mm , heavy duty openable props oblique scaffolding made of ms pipe of 60 and 48mm dia , ms centering plates of size 90cm x 60cm of thickness 14 guage , portable ms body needle vibrator machine with power 3 hp to 5 hp

CTN :45096943

28 May, 2026 NA

Indore - Madhya Pradesh

Tender For invitation of rates for flex printing and other items for year 2026-27 at nagar parishad rau distt. indore second call all rates should be qouted excluding gst. -flex printing (standard thickness); flex printing (black back, 280 gsm thickness); vinyl printing for stickers, etc. (including cutting); vinyl printing for branding, etc.; vinyl printing on 5mm foam sheet for branding, etc.; vinyl printing on sunpack sheet for branding, cutouts, etc.; sunpack sheet with printing for branding, cutouts, etc.; one-way vision printing and pasting for branding, etc.; eco-solvent vinyl printing for stickers, etc. (including cutting and lamination); eco-solvent vinyl printing on 5mm foam sheet; glow sign boards; acp sign boards (supply) – acp sheet base, ms tubular frame (1.5-inch), with printed retro-reflective media or radium lettering; ms poles for glow sign/acp/acrylic boards; production of various-sized 'handy plates' (handheld placards) for rallies, including handles; production of iron frames (various sizes) – 3 kg heavy-duty (made from 1-inch pipes with adequate support); production of iron frames (various sizes) – 1.5 kg light-duty (made from 1-inch pipes with adequate support); ms standee (folding) supply – size: 6x3 ft; specifications: 280 gsm black back quality, including framing; weight: 3 kg. supply of aluminum roll-up standees (manufactured with heavy-duty iron frames) – size: 6x3 ft, specification: 280 gsm black-back quality; supply of aluminum roll-up standees – size: 6x2.5 ft, specification: 280 gsm black-back quality; canopy size: 4x4x6 ft, specification: flex 280 gsm black-back quality (including stitching and carrying bag); canopy size: 6x6x7 ft, specification: flex 280 gsm black-back quality (including stitching and carrying bag); single-color pamphlets (a4 size) – per lot of 1,000 pieces; multi-color pamphlets (a4 size) – per lot of 1,000 pieces; multi-color posters (18"x23" size) with gumming sticker – per lot of 1,000 pieces; labor charges for flex installation; labor charges for vinyl pasting; installation of various types of glow sign / acp boards (including necessary materials such as concrete, sand, cement, and other supplies), inclusive of labor; labor charges for sunpack sheet installation; a4 size invitation cards (multi-color, with lamination and envelope).

State Government

CTN :45289932

29 May, 2026 NA

Balurghat - West Bengal

Tender For supply of item rate for construction materials for all types of construction works under mgnrega - hire charges of coaltar boiler 900 to 1400 litres, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, production cost of concrete by batch mix plant, hire charges of diesel truck-9 tonne, hire charges of sparaying machine including electric charges, hire charges of coaltar sprayer, hire charges of barber green, drying,mixing and asphalt plant, with accessories, capacity 30/45 tonne, pumping charges of concrete including hire charges of pump, piping work & accessories etc., hire charges of derrick monkey rope, hire charges of pump set of capacity 4000 litres/hour, vibrator (needle type 40 mm), machine for rubbing of floors, front end loader capacity 1.00 cum, hire and running charges of tripod and mechanical winch machine complete with power unit and accessories, mastic cooker, hire and running charges of tipper, hire and running charges of loader, hand grinder for mirror polish, hydraulic excavator (3d) with driver and fuel, pin vibrator, surface vibrator, hot bitumen mixer 0.5cum i/c hand cart, hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site, hire and running charges of light crane, hire and running charges of bentonite pump, hire and running charges of vibrating pile driving hammer complete with power unit and accessories, hire and running charges of crane 20 tonne capacity, carriage of concrete by transit mixer, generator 250 kva, paint applicator, mobile crane, tractor with ripper attachment, tractor with trolley, air compressor 250 cm with two leads for pneumatic cutters/hammers, joint cutting machine with 2-3 blades, c.c.batch mix plant, road sweeper, slip form paver with sensor, water tanker 5000 ltr. capacity, concrete joint cutting machine, texturing machine, dozer d-80-a12, motor grade 3.35 meter blade, hydraulic excavator of 1 cum bucker, front end loader 1 cum bucket capacity (incl pol), tipper -5 cum, vibratory roller 8 to 10 tonne, smooth wheeled roller 8 to 10 tonne, tandem road roller, water tanker 5 to 6 kl capacity, air compressor, wet mix plant 60 tph, mechanical broom hydraulic, emulsion pressure distributor @1750 sqm per hour, hot mix plant - 120 tph capacity, hot mix plant 100 tph capacity, paver finisher hydrostatic with sensor control 100 tph, paver finisher mechanical 100 tph, batching and mixing plant @75 cum per hour, concrete paver finisher with 40 hp motor and sensor, generator 250 kva, generator 100 kva/125, truck 5.5 cum/ 10 tonnes, road sweeper (mechamical broom) @ 1250 sqm per hour, drum type hmp of 60-90 tph capacity @ 75 tonne per hour actual output, hire and running charges of drill machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator), pile integrity testing equipment, excavation of diaphragm wall by mechanical grab, hire charges of tata 407 or equivalent for local shifting, hire charges of diesel truck - 9 tonne (without pol), using cost of ultra voilet radiation tube, compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel, hire charges of suction jeting machine 2200 psi machine i/c pol and operator, hire charges of drill machine upto 30 mm dia, hire charges of sand blasting equipment, hire charges of compressor, welding charges of shear key to existing reinforcement, hire charges of plant and machinery that can inject 350 kg/day, seam bolts and nuts 6 mm dia and 25 mm long, fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick, fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge, fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge, fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge, fibre (high impact poly propelene reinforced) cem

CTN :45224361

03 Jun, 2026 NA

Patti - Punjab

Tender For corrigendum : supply of 3d printed continuous glass fiber reinforced concrete panels as per the ts , steel lintels for 2 openings above loopholes and 3 above door , box sections of size 100x100x5mm cut to length , 10mm and 12mm tmt bars , pcc solid block or class a bricks , stone patti slab each of size 600x300x50mm thick , paver block m 20 grade and 50mm thickness , flexible polyurethane foams sealant 750ml , eaterior weather proof paint , ms loop hole of size 900x400mm drawing duly painted with two coats , ms door of size 900x1850mm drawing duly painted , sand bag 18inchx34inch hdpe , pbs roll 20m x 1m , bitumen primer , well graded sand , all in one aggregate , 0 point 5mm thick cgi or metal deck or ppgi sheets for roof casting of size 20ft x 4ft , 12 mm and 20 mm tmt rebar fe 500 grade , binding wire , steel cutting blade 4 inch dia , opc oblique ppc 53 grade cement , distemper oil emulsion , three tier bunk bed , toilet accessories including ews and shower and hand wash and septic tank

corporations/Associations/Others

CTN :45192961

26 May, 2026 5.76 Lacs

Jhunjhunu - Rajasthan

Tender For regular operation and maintenance of water supply scheme with material at industrial area, residential colony and commercial complex jhunjhunu phase-i and ii - item rate, regular operation of tube wells installed with pumping machineries with round the clock monitoring, including complete repair and maintenance of pump set with cost of material and labour required for repairing/rewinding, lowering and un-lowering etc.the scope of work also includes repair and maintenance of panel board, main switches, kit-kates, electric connections, service cableand submersible cables inclusive of cost of material and labour required for uninterrupted functioning of tube wells.it is also inclusive of complete repair and maintenance of pipes connected with pump and motor, its replacement, if required, regular upkeeping of log book etc. and other works as mentioned in tender document / scope of work complete in all respect and as directed by engineer in-charge., regular operation and maintenance of pump houses located at wss complex/complexes.the work includes operation of distribution line main valves for daily supply of water of the industrial area at supply times specified by corporation. regular operation of pump house installed with existing centrifugal / monoblock pump / motors, with round the clock monitoring, including complete repair and maintenance of pump sets, connecting suction/delivery pipes jointing material, panel, main switches, kit-kates, electric connections, service cable including cost of material and labour required for repairing / rewinding, removal and replacement etc. for uninterrupted functioning of electric panels and pump sets with regular up-keepment of log books, repair of leakages in pump glans and ms/ci/ac pipeline system inside of wss campus complete, regular chemical dosing in cwr maintaining general cleanliness at pump house and wss campus complete in all respect as directed by engineer in-charge., repair & maintenance of existing distribution / rising main pipe line system consisting of ac pressure pipeline /pvc/upvc/hdpe/ci/ di lines for maintaining smooth water supply in area covered under the scope of work.the scope of work includes timely repairing of leakage in all existing distribution / rising main pipeline of all sizes by digging out suitable size of pit in soft & loose soil / hard soil including cutting of bituminous / cement concrete / wbm / wmm surface at any site of work at no extra cost.it is also inclusive of cutting of pipe ends, fixing of pipe pieces with jointing material to make repair leak proof and refilling the pit / trench by excavated soil by ramming it at all sides of pipes & upto ground level. contractor will do dewatering at his own level by making necessary arrangements, if required. contractor will usetheir own t&p and jointing materials, however the pipe line and sluice valves (if required) etc. shall be provided by the corporation but the contractor shall have to deposit the damaged material in riico store. but no additional payment shall be made on account of any material or transportation charges.

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :45293974

28 May, 2026 30.05 Lacs

Ramgarh - Jharkhand

Tender For cleaning of existing garland drains, cutting new garland drains, provision of concrete pipe culverts and pump foundation under monsoon preparation works of north urimari project, barka-sayal area.

Warehouse Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government