Latest washed sand Tenders | Government washed sand Tenders

State Government

CTN :45705821

30 Jun, 2026 NA

Sirsa - Haryana

Tender For providing, lowering, laying, cutting (cut surface to be uniformly finished), jointing with rubber rings marked with is : 5382 and testing of spigot and socketted rcc, np2 marked with is : 458-1988 and specials into trenches for all depths including carriage, loading, unloading, stacking, handling, re-handling etc. complete is all respects to the satisfaction to the engineer - in -charge. 4. 350 mm i/d ,`jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 cement sand mortar nearly dry heavily caulked into joints and with end dowels filled with 1:1 cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special , earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by engineer-in-charge. 1. all kinds of soil ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 3. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 40 mm nominal size),brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 2. cement mortar 1:6 (1 cement : 6 coarse sand), cement plaster (in fine sand) 12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand)

State Government

CTN :45702917

30 Jun, 2026 NA

Rohtak - Haryana

Tender For brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. cement mortar 1:4 (1 cement : 4 coarse sand) ,lan and reinforced concrete pipes `jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 cement sand mortar nearly dry heavily caulked into joints and with end dowels filled with 1:1 cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being. ` 7. 350 mm internal diametre sewer pipe

State Government

CTN :45702921

30 Jun, 2026 NA

Rohtak - Haryana

Tender For brick work brick work with common burnt clay non-modular bricks of class designation 10.5 in foundation and plinth in: 1. cement mortar 1:4 (1 cement : 4 coarse sand) ,lan and reinforced concrete pipes `jointing plain and reinforced concrete pipes and specials of all classes in trenches using collar joints jointed with 1:1 cement sand mortar nearly dry heavily caulked into joints and with end dowels filled with 1:1 cement sand mortar including facing trowelling and finishing the joints at an angle of 45 degrees with faces of collars keeping joints wet till curved testing the drain lines for leakage and making good all leakage and defects as laid down in the contract specifications complete with two spigot ends jointed to collar and internal diameter of sewer pipe or special being. ` 7. 350 mm internal diametre sewer pipe

CTN :45704229

07 Jul, 2026 NA

Durg - Chhattisgarh

Tender For tender for supply of spares for wpil make pumps -a7tc 3 stage pump shaft , e14tc 2 stage impeller , e14tc 2 stage bowl , hm16tc suction bell , hm16tc bowl , a10tc 2 stage suction bell , a10tc 2 stage impeller , a10tc 2 stage rubber bearing , a10tc 2 stage shaft coupling , a10tc 2 stage column pipe , a10tc 2 stage head shaft , a10tc 2 stage bearing , a10tc 2 stage packing box bearing , a10tc 2 stage suction bell bearing , a10tc 2 stage discharge case bearing , a10tc 2 stage pump shaft , a10tc 2 stage flexible coupling , a10tc 2 stage lantern ring , a10tc 2 stage sand collar , a10tc 2 stage seal ring , a10tc 2 stage water deflector

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

State Government

CTN :45598673

24 Jun, 2026 NA

Umrer - Maharashtra

Tender For annual material supply for verioun scheame constructions at. gp. pendharabodi - construction materials, metal 80 mm, metal 40 mm, metal 20 mm, metal 12 mm, barbed wire / fenshing wire, sand, murum, cement 53 grade isi mark, road rollar rent, water tankar, sittl 6mm, still 8 mm, still 10 mm, still 12 mm, still 16 mm, still 20 mm, centring tar, bricks (red), bricks (cement), mixer machine, tiles ceramic, tiles vitrified, tiles polished chequered, iron door with frame & palla, cement door palla, cement door frame, iron sheet of 0.50 mm, islb angle, iron angle, iron window grill, plastic water tank (1000 lit.), plastic water tank (500 lit.), distemper, jcb, damber/ tar oil, alluminium sliding window, cement pipe 150 mm with collar, cement pipe 250 mm with collar, cement pipe 300 mm with collar, cement pipe 450 mm with collar, cement pipe 600 mm with collar, cement pipe 800 mm with collar, cement pipe 900 mm with collar, khadanga, centring plate rent, information board (0.90x0.60)cm, kota stone, vibrating machine, ms grill, snowsem, cement waterproof paint, oil paint, tarpipne, wc pan (toilet seat), pvc pipe 1/2 inch, pvc pipe 3/4 inch, pvc pipe 1 inch, pvc tee / elbo, paiwar block, rubble, toilet combod sit

State Government

CTN :45598676

24 Jun, 2026 NA

Umrer - Maharashtra

Tender For annual materials supply for verious scheame construtions at.gp. shivapur - construction materials, metal 80 mm, metal 40 mm, metal 20 mm, metal 12 mm, barbed wire / fenshing wire, sand, murum, cement 53 grade isi mark, road rollar rent, water tankar, sittl 6mm, still 8 mm, still 10 mm, still 12 mm, still 16 mm, still 20 mm, centring tar, bricks (red), bricks (cement), mixer machine, tiles ceramic, tiles vitrified, tiles polished chequered, iron door with frame & palla, cement door palla, cement door frame, iron sheet of 0.50 mm, islb angle, iron angle, iron window grill, plastic water tank (1000 lit.), plastic water tank (500 lit.), distemper, jcb, damber/ tar oil, alluminium sliding window, cement pipe 150 mm with collar, cement pipe 250 mm with collar, cement pipe 300 mm with collar, cement pipe 450 mm with collar, cement pipe 600 mm with collar, cement pipe 800 mm with collar, cement pipe 900 mm with collar, khadanga, centring plate rent, information board (0.90x0.60)cm, kota stone, vibrating machine, ms grill, snowsem, cement waterproof paint, oil paint, tarpipne, wc pan (toilet seat), pvc pipe 1/2 inch, pvc pipe 3/4 inch, pvc pipe 1 inch, pvc tee / elbo, paiwar block, rubble, toilet combod sit

State Government

CTN :45589456

25 Jun, 2026 NA

Giridh - Jharkhand

Tender For quotation rate of materials - granular material or hard murrum for gsb works at quarry, aluminium alloy/galvanized steel, rcc pipe np 4 heavy duty non pressure pipe 1000 mm dia, rcc pipe np 4 heavy duty non pressure pipe 1200 mm dia, steel pipe 50mm external dia as per is:1239, coller for joints 300mm dia, rcc pipe np 4 heavy duty non pressure pipe 300 mm dia, steel helmet and cushion block on top of pile head during driving, steel pipe 25mm external dia as per is:1239, "np2 r.c.c hume pipe with collar as per i.s. 458-1971(i) 100 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ii) 150 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iii) 200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iv) 250 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(v) 300 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vi) 450 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vii) 600 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(viii) 700 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ix) 800 nn dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(x) 900 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xi) 1000 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1400 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(i) 300 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(ii) 450 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iii) 600 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iv) 700 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(v) 800 mm dia and 900 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vi) 1000 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vii) 1200 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(viii) 1400 mm dia", jute rope 12 mm dia, aggregate size-45 mm to 2.36 mm, aggregate size-45 mm to 22.4 mm, aggregate size-2.36 mm to 0.075mm, aggregate size 22.4mm to 5.6 mm, aggregate size 63 mm to 45 mm, aggregate size below 5.0 mm, bamboo (1st class) 85 mm-100mm dia 2.0 m long, bamboo (1st class) 85 mm-100mm dia 2.5 m long, bamboo (1st class) 85 mm-100mm dia 3.0 m long, bamboo (1st class) 85 mm-100mm dia 4.5m-5.5m long, bamboo (2nd class) 75 mm dia, 1.8 m-2.5 long, bamboo (2nd class) 75 mm dia, 2.1 m-3.0 m long, bituminous sealant, blasting material, bond stone (400mm x 150mm x 150mm), corbelling stones (300mm x 150mmx 150mm), corrosion resistant structural steel grating, crow bras 40 mm dia (hire charges), crushed sand or grit passing 2.36 mm and retained on 180 micron, crushed slag, crushed stone aggregate 26.5mm to 75 micron, crushed stone chipping 6.7mm size 100% passing 11.2 mm and retained on 2.36 mm, crushed stone chipping 9.5 mm nominal size, debonding strips (3.75m x 10mm x 5mm cut-out of rubber filler board or similar material including 5% wastage), edge stone (450mm x 350mm x 100mm), edge stone (450mm x 350mm x 200mm), epoxy paint, epoxy primer, gi pipe 100mm dia (tata or equivalent make), gi wires (4mm dia), granular material (natural occurring soil gravel mixture/quarry waste, kankar, laterite, dhandla, hand broken metal 40mm size, interlocking blocks with 60 mm thickness, interlocking blocks with 80 mm thickness, key aggregates passing 22.4 mm and retained on 2.8mm, lime putty, local wood piles (1st class)150-200mm dia, 6m long, local wood piles (1st class) 100mm x 75mm, loose stone, ms sheet tube (47 mmx47mmx12 swg sheet), ms sheet 1.5mm thick, ms sheet 2mm thick, polythene sheeting (0.2mm to 0.5mm thick), (covering 2/3 rd dowel bars (20x23) and tight fit including 5% wastage), rcc pipe np3 (750mm dia), rcc pipe np3 (500mm dia), rcc pipe np4 (750mm dia), rcc pipe np4 (600mm dia), rcc pipe np4 (500mm dia), benzene, stone for stone set pavement (300mm x 200mm x 150mm), well graded granular base material-grading a 26.5mm to 4.75mm, well graded granular base

CTN :45537989

24 Jun, 2026 NA

Jaipur - Rajasthan

Tender For annual rate contract (arc) for supply of wpil make pumps spares for various power plants of rvun - ct drain/ slug pump pump sl.no. vbp 30111-114 ,model : e12tc/1 stg, motor rating: 15 kw, speed:1460 rpm for ctpp, chhabra, basket strainer, partno. 1, pipe plug, partno. 2, suction bell, partno. 3, bearing for s/ bell, partno. 4, sand coller, partno. 5, seal ring, partno. 7, impeller, partno. 8, imp. lock collet, partno. 9, bowl, partno. 10, bearing for bowl -ruuber, partno. 11, bearing for bowl -bronze, partno. 12, discharge case, partno. 13, bearing for d/ case, partno. 14, pump shaft, partno. 15, pump shaft coupling, partno. 16, bottom column pipe, partno. 18, bottom line shaft, partno. 19, bearing retainer, partno. 20, line shaft bearing, partno. 21, line shaft coupling, partno. 22, line shaft sleeve, partno. 23, top column pipe, partno. 25, sole plate, partno. 28, base plate, partno. 29, discharge head, partno. 30, head shaft with key, partno. 31, packing box, partno. 32, bearing for pkg box, partno. 33, packing , partno. 34, lantern ring, partno. 35, packing gland, partno. 36, water deflector, partno. 37, 1 tbh assly, partno. 40, motor stand, partno. 41, adjusting nut, partno. 42, flexible coupling, partno. 43, spares for zld pump model : d200-150-500, wpil ref no. ebp 30004-05-i, capacity-310 m3 /hr, total head-80 mtr, motor rating: 110 kw, speed:1484 rpm for ctpp, chhabra, casing, partno. 1, stuffing box cover, partno. 2, impeller, partno. 3, casing wearing ring, partno.4, shaft, partno. 5, sleeve , partno. 6, gland packing, partno. 7, gland lock, partno.8, impeller key, partno.9, coupling key, partno. 10, a/f bearing (d.e.), partno. 11, a/f bearing (n.d.e.), partno. 12, impeller nut, partno. 13, imp. nut lock washer, partno. 14, bearing lock nut, partno. 15, frame adaptor, partno. 16, bearing housing, partno. 17, bearing cover- d.e., partno. 18, bearing cover- n.d.e, partno. 19, adaptor foot, partno. 20, breather , partno. 21, constant level oiler, partno. 22, lip seal-de, partno. 23, lip seal- nde, partno. 24, water thrower, partno. 25, seal ring, partno. 26, gasket for casing, partno. 27, stud, partno. 28, nut for stud, partno. 29, hex. hd cap screw, partno. 30, hex. hd cap screw, partno. 31, hex. hd cap screw, partno. 32, hex. hd cap screw, partno. 33, plug, partno. 35, spares for ds pump, model:- gm12tc, wpil ref. no.: - vj-30091-92, no. of stage: - 6, capacity: - 240 m3/hr, total bowl head: - 70 mtr, speed: - 1480 rpm, motor rating: - 75 kw for ctpp, chhabra, basket strainer, partno. 1, pipe plug, partno. 2, suction bell, partno. 3, bearing for suction bell, partno. 4, sand collar, partno. 5, hex. head cap screw, partno. 6, seal ring, partno. 7, impeller, partno. 8, imp. lock collet, partno. 9, bowl, partno. 10, rubber bearing, partno. 11, bearing for bowl, partno. 12, discharge case, partno. 13, bearing for discharge case, partno. 14, pump shaft, partno. 15, pump shaft coupling, partno. 16, hex. hd. cap screw, partno. 17, bott. column pipe-60" lg, partno. 18, bott. line shaft-60" lg, partno. 19, bearing retainer, partno. 20, line shaft bearing, partno. 21, line shaft sleeve, partno. 22, line shaft coupling, partno. 23, hex. hd. bolt with nut, partno. 24, top column pipe, partno. 25, hex. head cap screw, partno. 26, foundation bolts, partno. 27, sole plate, partno. 28, discharge head, partno. 29, head shaft with key, partno. 30, packing box, partno. 31, packing box bearing, partno. 32, packing, partno. 33, lantern ring, partno. 34, hex. hd cap screw, partno. 35, packing gland, partno. 36, water deflector, partno. 37, hex. hd. bolt with nut, partno. 38, motor stand, partno. 39, thrust brg. hous. assy., partno. 40, adjusting nut, partno. 41, flexible coupling, partno. 42, hex. hd cap screw, partno. 43, pump sl.no. val 30111-12, model : e14tc/4 stg, motor rating: 132 kw, speed:1488 rpm for csctpp, chhabra, basket strainer, partno. 1, pipe plug, partno. 2, suction bell, partno. 3, bearing for s/ bell, partno. 4, sand co

Central Government/Public Sector

CTN :45492620

20 Jun, 2026 NA

Katipala - Karnataka

Tender For tender for supply of pump spares - brg. interbowl , pn 09 , ga37362a/b , impeller(semi-open) , pn 07 , ga37362a/b , impeller collet , pn 06 , ga37362a/b , inter bowl , pn 08 , ga37362a/b , line shaft , pn 17 , ga37362a/b , line shaft sleeve , pn 18 , ga37362a/b , brg. retainer , pn 20 , ga37362a/b , flgd. top col.pipe , pn 21 , ga37362a/b , top shaft sleeve , pn 40 , ga37362a/b , packing box bush , pn 41 , ga37362a/b , packing box , pn 42 , ga37362a/b , packing gland , pn 46 , ga37362a/b , top shaft , pn 36 , ga37362a/b , line shaft coupling , pn 38 , ga37362a/b , line shaft brg.pn 19 moc thordon , ga37362a/b , surface discharge head-pn -25 , ga37362a/b , adjusting nut-pn -32 , ga37362a/b , lock washer , pn 4 , ga33701 , shaft sleeve , pn 11 , ga33701 , wear ring casing , pn 17 , ga33701 , pump shaft , pn 26 , ga33701 , key , pump half coupling , pn 27 , ga33701 , impeller lock collet , pn 10 , ga37363a/b , top shaft sleeve , pn 28 , ga37363a/b , packing box bush , pn 29 , ga37363a/b , top shaft , pn 40 , ga37363a/b , line shaft coupling , pn 48 , ga37363a/b , wearing ring for bowl , pn 51 , ga37363a/b , wearing ring for impeller , pn 52 , ga37363a/b , col. brg. bush , pn 16 , ga37364a/b , packing box , pn 24 , ga37364a/b , shaft sleeve , pn 18 , pump type 5823 size 500 x 400 , ga38242 h/i , shaft with keys , pump type 5823 size 500 x 400 , ga38242 h/i , impeller (1st stage) , pn 15 for ga8275n , model m5922-150x125/2 stage , impeller (2nd stage) , pn 16 for ga8275n , model m5922-150x125/2 stage , sleeve nut and lock nut (nde) , pn 9 for ga8275n , model m5922-150x125/2 stage , sleeve nut/lock nut (de) , pn 32 for ga8275n , model m5922-150x125/2 stage , gland half , pn 23 for ga 8275n , model m5922-150x125/2 stage , pump shaft pn 26 for ga 8275n , model m5922-150x125/2 stage , gasket & o-ring for 8275n , model m5922-150x125/2 stage , line shaft sleeve pn 22 for ga8270n , model 11h/9 stage , line shaft bearing pn 23 for ga8270n , model 11h/9 stage , top shaft sleeve pn 33 for ga8270n , model 11h/9 stage , impeller pn 11 for ga8270n , model 11h/9 stage , interbowl pn 9 for ga8270n , model 11h/9 stage , packing box bush pn 35 for ga8270n , model 11h/9 stage , oil retainer sleeve pn tsa 28 for ga8270n , model 11h/9 stage , sand cap pn 3 for ga8270n , model 11h/9 stage , impeller lock collet pn 12 for ga8270n , model 11h/9 stage , discharge case bearing pn 14 for ga8270n , model 11h/9 stage , pump shaft pn 18 for ga8270n , model 11h/9 stage , top shaft pn 45 for ga8270n , model 11h/9 stage , suction case pn 5 for ga8270n , model 11h/9 stage , discharge case pn 15 for ga8270n , model 11h/9 stage , bearing retainer pn 24 for ga8270n , model 11h/9 stage , packing box pn 34 for ga8270n , model 11h/9 stage , packing gland pn 39 for ga8270n , model 11h/9 stage , thrust bearing housing pn tsa 01 for ga8270n , model 11h/9 stage , thrust bearing seat pn tsa 03 for ga8270n , model 11h/9 stage , thrust hub pn tsa 09 for ga8270n , model 11h/9 stage , pump shaft , pn 09 , for ga8272d , model 21m/2 stage , bowl wearing , pn 64 , for ga8272d , model 21m/2 stage , bowl bush , pn 13 , for ga8272d , model 21m/2 stage , brg. interbowl , pn 09 , ga37362a/b , top shaft sleeve , pn 33 , for ga8272d , model 21m/2 stage , thrust collar half , pn 59 , for ga8272d , model 21m/2 stage , line shaft p/n 21 for ga8270n , model 11h/9 stage , water seal ring p/n 38 for ga8270n , model 11h/9 stage

Washed Sand Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors