Latest washing ramp Tenders | Government washing ramp Tenders

State Government

CTN :43208854

23 Dec, 2025 21.46 Lacs

Delhi - Delhi

Tender For providing and laying semi-dense bituminous concrete, markings of existing road, repair and replacement of kerb stone, providing and fixing of glow studs, pvc hump with other miscellaneous civil works at netaji shubash sports complex.

corporations/Associations/Others

CTN :43244352

29 Dec, 2025 5.83 Crore

Surat - Gujarat

Tender For construction of cement concrete pavement & allied works on 18.00 mt. t.p. road from midas square junction to ofira prestige (f.p. 23 to f.p. 44) at t.p. 19 (parvat-magob) in south east zone (limbayat) (work no. 01). (2nd attempt).

Central Government/Public Sector

CTN :43203352

03 Jan, 2026 1.93 Lacs

Nagpur - Maharashtra

Tender For providing and laying cement concrete works in ocf shed kandri mine

corporations/Associations/Others

CTN :43199550

23 Dec, 2025 10.00 Lacs

Coimbatore - Tamil Nadu

Tender For restoration of damaged cement concrete flooring due to ugss and water supply pipeline works at uthami nagar 1st and 2nd cut roads in ward no 96, south zone

corporations/Associations/Others

CTN :43245450

02 Jan, 2026 4.23 Lacs

Madurai - Tamil Nadu

Tender For providing cement concrete road works to naganakulam ad colony south side road (part) in ward no.5

corporations/Associations/Others

CTN :43237800

05 Jan, 2026 2.51 Lacs

Madurai - Tamil Nadu

Tender For improvement works by replacing the existing damaged terrace (pressed) tiles, damaged concrete in the roof slab and redo the same along with allied works such as colour washing and white washing to the control room building of vikramangalam 33/11kv ss

corporations/Associations/Others

CTN :43249078

13 Jan, 2026 1.99 Lacs

Kolkata - West Bengal

Tender For necessary ip works incl. concrete works at j.n. rd, g.c. ln 3/1,16 and adj. area, g.c. rd pr. 2 to 3,crem. st. pr. 1 to 7 and adj. area, g.c. ln. pr. no 5,23 and adj. area, j.n. rd pr. no-6 to 8, lnt. st.pr. no 36 to 52.

State Government

CTN :42954563

22 Dec, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of providing flooring parking tiles at yoga centre ihm bangalore - pre cast concrete , cement grouting , fixing tubular steel , demolishing mesh , fixing polycarbonate sheet , fixing 4 mm sheet , fixing chamber cover rubber , fixing 36 watt led , fixing 300 watt led , finishing exterior walls , laying heavy gauge pvc conduit pipe , laying electrical standards , laying 2 point 5 electrical standards , laying 4 point 5 speaker wire , installation of existing spearkers , civil works

Central Government/Public Sector

CTN :43084218

23 Dec, 2025 NA

Sundergarh - Odisha

Tender For corrigendum : name of job: package- a – immovable items:immovable items of design, manufacturing, supply, receipt at site, civil & architectural works, erection, internal electrification, painting & finishing works etc. and handing over to site of, removable/ re-erectable type pre-engineered, pre- fabricated steel closed storage sheds (6 nos. of 900 sqm each), supply and installation of steel water storage tank of approx. 250 kl for construction water, supply and installation of pit-less type electronic weigh bridge of 100 mt capacity including foundation, mess building etc., supply and installation of portable toilet blocks, development of storage yard with internal roads and drains, hard crusting, supply of precast concrete sleepers, fencing and gate for storage yard and bhel office area, civil and sub-structure works of the diverted office shed till flooring pcc, civil and architectural work of safety park , mess building, civil quality lab, watch tower etc. at 1x800 mw darlipali super thermal power project, stage-ii. package-b- movable items:movable items of design, manufacturing, supply, receipt at site, civil & architectural works, erection, internal electrification, painting & finishing works etc. and handing over to site of, removable/ re-erectable type pre-engineered, pre- fabricated steel closed storage sheds (6 nos. of 900 sqm each), supply and installation of steel water storage tank of approx. 250 kl for construction water, supply and installation of pit-less type electronic weigh bridge of 100 mt capacity including foundation, mess building etc., supply and installation of portable toilet blocks, development of storage yard with internal roads and drains, hard crusting, supply of precast concrete sleepers, fencing and gate for storage yard and bhel office area, civil and sub-structure works of the diverted office shed till flooring pcc, civil and architectural work of safety park , mess building, civil quality lab, watch tower etc. at 1x800 mw darlipali super thermal power project, stage-ii.

CTN :43165482

22 Dec, 2025 15.17 Lacs

Panchkula - Haryana

Tender For providing and fixing of open gym equipment in various parks of sector 26 , ward no 18, panchkula. - works details, air walker: providing, designing and fixing of air-walker of size 100 550 1480mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick made up of hot rolled tubular steel and hot dipped galvanized, and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. base plate cover shall be made up of virgin lldpe plastic by rotational moulding with minimum 4.00mm thickness u v resistant and colour as approved by engineer-in charge. high quality grip rubber should be used on handles. foothold shall be made of nylon alloy with rounded edge to prevent impact and injury. maintenance free bearing should be used in equipment manufactured by reputed company duly sealed and self lubricated to be approved by engineer in charge. equipment to be fitted with inbuilt limiters. the equipment should be fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and when concrete is set, fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc., horse rider station: providing, designing and fixing of horse rider station each of size 1000 x 600 1100 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick. all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zine primer paint to be applied at all welding points prior to finishing. padals shall be made up nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly.bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by engineer-in-charge. equipment to be fitted within built limiters to prevent unwanted movements. all open ends of pipe to be coloured by gi/lldpe caps for user safety. the equipment lope fixed on ground with concrete of minimum strength m25 and j shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc., leg press: providing, designing and fixing of stair stepper in a combinationof pair and a single step of size 2000 x 550 x 1600 mm fabricated with main post of 140mm dia and 3.00 mm thick and other pipes of 40mm dia 3.00mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using akzo nobel or equivalent of 80-120 micron thick.all welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber at top end. padals shall be made up of nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and u v resistant environmental friendly.bearing used shall be maintenance free, duly oiled sealed and

Washing Ramp Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors