Latest watch case Tenders | Government watch case Tenders

State Government

CTN :40799519

07 Jul, 2025 13.08 Lacs

Nandyal - Andhra Pradesh

Tender For supply of materials to srisaila tv channel room for maintenance (2nd call) - supply of hdmi cable of length 5 mtr with ethernet 2.0 , supply of hdmi cable of length 15 mtr with ethernet 2.0 , supply of sc-sc fiber patch chords of length 03 meters make: optilink, supply of sc-lc fiber patch chords of length 03 meters make: optilink, supply of sony xqd 120 gb g-0 series memory card (r 440 mb/s, w 400 mb/s) make: sony, model no: qd-g120f, supply of lithium-ion battery, make: sony, model no: bp-u60 (56 wh), supply of two channel simultaneous battery charger/ac adaptor for bp-u90/u60/u60t/u30 lithium-ion battery, model no: bc-u2a, make: sony, supply of sdi cables of length 20 meters, make: mx, supply of 4k ultra high defination 1 in x 8 out hdmi spilitter, supply of sigma 2.0 laptop backpack, make: american tourister , supply of dji smart controller with a built in 5.5 inch 1080p display for mavic 2 pro of make: dji, supply of getzget carrying case bag for dji mavic 2 pro of make: getzget, supply of fedus usb 3.0 extension cable of length 10 meters make: fedus , supply of fedus usb 3.0 extension cable of length 20 meters make: fedus, supply of ptx camera, 4k ndi with 20x zoom, make: canon, model no: cr-n300 with 2 years warranty

Central Government And Public Sector

CTN :40837102

07 Jul, 2025 NA

Tinsukia - Assam

Tender For supply of tyre defect gauge for (a) bg coaching stock, as per railway board approved irca part 4, rul e 2.8.4 andplate 38. to check the various wheel defect like thin flange, sharp flange, deep flange, hollow t yre/ false flange,root radius and flat places on wheel. the gauge must be suitable for checking wheel flatn ess 50 mm rejection limitand thin flange 22 mm rejection limit. made of hard alloy steel/ stainless steel havi ng thickness approximately 3 mm to3.5 mm with permanent making of the type of rolling stock which can be checked -quantity=4nos. (b) tyre defect gauge for solid wheel for broad gauge stock , plate 52; steel pl ate 3.2mm thick; see rule 3.3.5 & s 4.19.1 -quantity=04 nos. to be supplied with carrying case along with calibration certificate from government approved test house; make :- pie or similar. [ warranty period: 3 0 months after the date of delivery ]

Central Government And Public Sector

CTN :40836457

04 Jul, 2025 NA

Raipur - Chhattisgarh

Tender For supply of auto leveling instrument with lock stand and fiber staff of 7m with complete set. h aving 24 x magnification, accuracy plus minus - 2.0mm, image erect, effective objective aperture 32mm, m in focus: 0.2m (7.9in.) from end of telescope, 0.3m (1ft.) from instrument center, field of view 1 degree 25 ? (2.5m), multiplication constant 100, sighting aid: gun sight, additive constant: 0, focusing knob: 1- spee d, compensator range + 15? retical pattern: cross line, resolving power 4?? , compensator setting accur acy plus- minus 0.5 including toolkit, operation manual, carrying case & plumbob, make/brand: bosch mod el gol26d with tripod and staff or similar. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40639814

26 Jun, 2025 NA

Malanjahknd - Madhya Pradesh

Tender For corrigendum : supply of 091600133 insulation tester hand generator type megger complete with testing leads & carrying case v , 091600152 insulation tester hand generator type megger complete with testing leads & carrying case v , 091600224 megger 2500v, hand operated , 093100069 hand generating analog type earth tester with three terminals and three ranges (x1/x10/x10

CTN :40803113

16 Jul, 2025 NA

Jamalpur - Bihar

Tender For supply of folding type portable wheel diameter gauge for b.g, specification :- 1. measuring range 800 -1010 mm, 2. measuring accuracy +/- 0.1mm, 3. least count 0.1mm, folding type portable wheel diamete r gauge, suitable for measuring of open wheel set, model wd-1 for b.g (mechanical type) gives the reading of wheel diameter direct on scale. supplied in carrying case with working manual & nabl approved lab cali bration certificate . make- pie [ warranty period: 30 months after the date of delivery ]

CTN :40405363

23 Jun, 2025 12.20 Crore

Netanar - Chhattisgarh

Tender For bid to ras custom bid for services - operation and maintenance of mobile equipment at nsl for a period of 01 year in 3 mtpa isp at nagarnar near jagdalpur, chhattisgarh state-nmdc steel limited has setup up a 3.0 mtpa integrated steel plant at nagarnar, chhattisgarh with coke oven, sinter plant, blast furnace, steel melting shop, thin slab caster, hot strip mill route and other auxiliary units- 2. contractor s scope of work/supply/responsibility: brief description of scope of work (not limited to) needs to be carried out by successful bidder 1. to carry out operation of mobile equipment as mentioned in annexure a by deputing skilled, qualified and experienced manpower. 2. to carry out maintenance of mobile equipment as mentioned in annexure b by deputing skilled, qualified and experienced manpower. 3. to maintain and operate the effluent treatment plant specially made for fmd as per environmental norms. 4. deployment of at-least the prescribed minimum strength of experienced manpower as indicated in clause no. 5.0 to successfully execute the operation & maintenance activities, with a provision to keep reserve in each manpower-category (if required) to meet the minimum daily requirement for round the clock operation and maintenance. 5. all the tools tackles and special tools including diagnostic tools like: mechanic tools, electrician tools, welder tools, tyre fitter tools, special tools, lifting tools, hydraulic pressure testing kit etc. required for operation & maintenance and repair of mobile equipment is in bidder s scope. separate tools should be available for site maintenance team and shop floor team. all tools and tackles should be tested and certified by third party. 6. all the shift personnel will report to respective shift supervisor of the successful bidder administratively. the shift supervisor shall be decided by bidder in consultation with nsl. bidder shall organize all the jobs of o&m with the help of their supervisors/ engineer and they shall coordinate continuously with nsl to carry out the operation and maintenance activities. 7. operation and maintenance of mobile equipment shall be carried out on 24 x 7 basis including sundays and holidays on a shift-wise basis (four shifts [a, b, c & g]. i. for operation: 1.operation of all the equipment will be in all shifts as and when required as listed in annexure a. 2.inspection report of vehicle will be prepared by bidder and approval of the same will be obtained from nsl. a.preventive maintenance: 1. checking/ adding/ replacing engine oil, hydraulic oil, brake oil, def level etc.; 2. checking and cleaning oil filter; 3. checking and adding/replacing engine coolant as the case may be; 4. checking fuel level and adding fuel if required; 5. checking and cleaning of fuel and air filters; 6. checking hydraulic filters, hoses, seal, o-ring etc.; 7. checking electrical switches, relay, fuse, bulb etc.; 8. battery charge level checking and charging & battery maintenance/cleaning; 9. checking all the safety devices like back horn, seat belt, camera, beacon light etc.; 10. check air pressure in tyre and check wheel nut tightness; 11. checking and adjustment of transmission, alternator and other belts and chain drive; 12. cleaning and washing of the vehicles; 13. maintaining good housekeeping of washing ram; 14. cleaning of operator/driver cabin; 15. greasing in all points; 16. apply cardium compound on wire rope/crane rope; 17. any other activity as required. b. periodic maintenance 1. engine oil change; 2. replacing fuel filter; 3. replacing oil filter; 4. changing of air filter kit; 5. change of steering filter; 6. gear box oil change; 7. rear axle oil change; 8. power steering oil change; 9. replacement of coolant; 10. carrying out tyre inflation and repair; 11. welding and gas cutting works; 12. housekeeping work of the repair shop; 13. cleaning and washing of the vehicles. c.breakdown maintenance: in case of breakdown of any mobile equipment as listed

CTN :40768833

09 Jul, 2025 NA

Dehradun - Uttarakhand

Tender For supply of antenna system , antenna support and raising system , water proof storage / carriage bags/ carrying case , accessories (guy ropes, picks, mounuting brackets)

CTN :40770287

10 Jul, 2025 NA

Chamba - Himachal Pradesh

Tender For supply of all in one desktop pc , power backup ups , ground controller system , mouse , keyboard , carrying case

Central Government/Public Sector

CTN :40797148

26 Jun, 2025 NA

Chennai - Tamil Nadu

Tender For 2.5 kv hand driven megger scale 0-10000 mega ohms with accessories with the following sp ecifications 1) hand driven analog type, range: 0-10,000 mega ohm 2) metal body 3) with test leads probes 4) calibration certificate: (calibration test certificate from nabl accredited lab to be s ubmitted at the time of supply of material). 5) with carrying case make: indotech / waco/micro / fl uke/metravi (warranty period: minimum 12 months from the date of supply) [ warranty period: 12 mont hs after the date of delivery ]

Central Government/Public Sector

CTN :40782205

26 Jun, 2025 NA

Rajkot - Gujarat

Tender For supply of digital clamp meter with vfd/irms measurement feature, 3 3/4 digits, lcd/led display, 0-1000v ac & dc, 0-1000a ac & dc with jaw openin g of 51 mm, auto power off, data hold, 30 ohms - 30 mega ohms, 300 hz - 100 khz, to work on 9volt battery with ip 50 for housing & ip 20 protection for t erminal with fine tip testing leads and carrying case. model as per rishabh make - rish clamp 1000a ac/dc or equivalent of meco , kusum , metravi, mext ech, fluke only [ warranty period: 30 months after the date of delivery ]

Watch Case Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government And Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector