Latest watch tower repair Tenders | Government watch tower repair Tenders

Central Government/Public Sector

CTN :45301360

30 May, 2026 9.85 Lacs

Kollam - Kerala

Tender For painting of administrative building and ms structural platform at mineral pilot plant, irerc

Central Government/Public Sector

CTN :45287725

29 May, 2026 49.41 Lacs

Visakhapatnam - Andhra Pradesh

Tender For running maintenance of technological equipment in converter shop of sms-1.- repair of technological structures in converter shop, mixer discharge spout door rope changing, lance oxygen and water hoses replacement and hose shifting , lance guide minor structural repairs during operation, assistance in removal of lance from thimble socket, converter tilt drive lube oil topping up in lube tank, minor structural repairs of ferro alloy chutes, hoppers and bulk material chutes during converter operation, shifting of stc, sptc&sdc, various running repairs of stc, sptc, sdc, and sample&service car, lime fines screw feeder jamming rectification by cleaning, shifting of mobile equipments like debricking m/c during breakdown in front of converter., tap hole drilling m/c drill bit hard facing, telescopic hoist rope changing/portable repair during relining of converter, well mix pipe changing in l.p bay, steel teeming ladle bell crank lever bracket/ trunnion collar changing, steel teeming ladle bottom purging adapter plate fixing, hot metal tilter /steel teeming ladle resting bracket repair, various minor structural and other repairs like dart pipe centering, tip cleaning and device locking etc in slag cut off device.replacement of charging crane/ mixer crane tilter hook, assistance in shifting jack car and telescopic hoist, minor repairs of lance carriage balancer during operation of converter, minor repairs of lance foldable platform &lance stands, minor repairs of dog house & dog house doors during operation, hot metal ladle spout repair, lub pump changing in revamped converters, shifting, jam cutting and other minor repairs of lance assemblies.

Central Government/Public Sector

CTN :45128574

02 Jun, 2026 NA

Mumbai - Maharashtra

Tender For (a) csmt - repair to leaky roofing sheets, valley gutters, and downtake pipes cop of high-rise truss platform no. 4 at csmt station. (b) csmt - repairs to divyangjan toilet block at csmt under sse (w)/wdi. (c)csmt - structural repair to external walls, columns, beams, chajjas and roof on the 3rd floor (south face) of the old annex building at csmt.(d) standing contracts for repairs to boundary wall between csmt to msd and msd to vdlr section for prevent trespassing under aden (w)/csmt.

Central Government/Public Sector

CTN :43606333

18 May, 2026 37.00 Lacs

Jammu - Jammu And Kashmir

Tender For bid to ras supply of feedback loop system : : - integrated dynamics noise and inertial motion capture assembly including 02 detectors , energy distribution and connectivity kit for probes,amplifiers, and digitizers , analysis platform with visualization interface , structural framework apparatus , protective gear ensemble , wave evaluation platform , disturbance attenuator sheet

Central Government And Public Sector

CTN :45196667

29 May, 2026 NA

Bangalore - Karnataka

Tender For providing of custom bid for services - supply, fabrication, erection and painting of structural steel platform, along with fabrication and installation of ms sheets for the emergency gate at pmhbl devangonthi station

CTN :45176474

25 May, 2026 NA

Tiruvallur - Tamil Nadu

Tender For supply of sply and erect of platform structural , sply and fix ms plate , sup and fab grating , sply and fab of reinforcement stl , handrail fabrication erection , sply and fab of chequered plate , sply and layg of pcc , sply and lay of rcc , sup and apply of plastering , dismantling of structural , sply and const brick work

corporations/Associations/Others

CTN :45151624

18 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

corporations/Associations/Others

CTN :45111401

14 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

Central Government/Public Sector

CTN :45121215

29 May, 2026 NA

Pune - Maharashtra

Tender For supply of heavy-duty platform trolley with cage/ fence, fabricated from ms hollow structural sections (hss), with anti-slip ms chequered plate platform. the trolley shall be mounted on four heavy-duty solid rubber wheels. the frame shall be of welded construction duly painted with anti-rust coating, suitable for operation on uneven floors. detailed specification is attached as annexure-a. [ warranty period: 30 months after the date of delivery ]

CTN :45089902

12 May, 2026 5.70 Lacs

Shimla - Himachal Pradesh

Tender For m/r to dpra bemloe, park area & chotta shimla dg. 2026-27. sh:- repair/renovation of structural steel platform for providing water storage tanks and allied development works near servant qtr. at chotta shimla & khalini area at shimla (h.p.)subwork/packages:m/r to dpra bemloe, park area & chotta shimla dg. 2026-27. sh:- repair/renovation of structural steel platform for providing water storage tanks and allied development works near servant qtr. at chotta shimla & khalini area at shimla (h.p.)

Watch Tower Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors