Latest water carrier Tenders | Government water carrier Tenders

CTN :45339810

09 Jun, 2026 25.00 Lacs

Jodhpur - Rajasthan

Tender For work of supply personnel for the work of water carrier and pump operator

CTN :45057581

01 Jun, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

CTN :45340723

09 Jun, 2026 25.00 Lacs

Jodhpur - Rajasthan

Tender For work of supply personnel for the work of water carrier and pump operator

CTN :45314260

01 Jun, 2026 NA

Jind - Haryana

Tender For supply of chain and chain spares - spares for inter carrier chain as per drg. no. mill-15 in respect of material & dimensions 1. inter carrier chain link (cast steel/ forged steel), pin for inter carrier (16ni3cr2, hardness 35 -45 rc), slate for inter carrier, spares for cane carrier chain as per drg. no. mill-22 in respect of material & dimensions bush for carrier chain ( material- 16ni3cr2, hardness 35-45), pin for cane carrier chian ( material- 16ni3cr2, hardness 35-45), side bar-a ( pin lock) for cane carrier chain ( high carbon steel), side bar-b ( pin round) for cane carrier chain ( high carbon steel), side bar-c ( bush) for cane carrier chain ( high carbon steel), slate for cane carrier chain (jcs 050), spares for bagasse carrier chain as per drg. no. blr-02 in respect of material & dimensions 1. bush for bagasse carrier chain ( material- 16ni3cr2, hardness 35-45), pin for bagasse carrier chain ( material- 16ni3cr2, hardness 35-45), roller for bagasse carrier chain (hardness 35), side bar a for bagasse carrier chain ( bush type) ( high carbon steel)., side bar b for bagasse carrier chain ( pin lock type) ( high carbon steel)., side bar c for bagasse carrier chain ( round pin type) ( high carbon steel).

CTN :45311746

30 May, 2026 NA

Panipat - Haryana

Tender For supply of planetary gear box and spares - horizontal foot mounted planetary gear box spares for bagasse elevator make- top gear transmission pvt ltd. model: 3725 hx mounting: foot red ratio: 166.95:1 rated torque: 224424 nm input: solid input power: 55kw/1440 rpm output speed- 8.62 rpm as per drawing no. 110221-2 rev 1 , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 2..horizontal foot mounted planetary gear box spares for main bagasse carrier make- top gear transmission pvt ltd. model: 3850 hx mounting: foot red ratio: 154.31:1 rated torque: 285612 nm input: solid input power: 75kw/1440 rpm output speed- 9.33 rpm as per drawing no. 150221-1 rev 0 , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 3..gear box for irc no. 3 spares sr. no.-3670hx ratio:- 189:72:1 code no. ffh3670hx189.72408 make-top gear transmission , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 4..gear box for irc no. 1 & 2 spares sr.no. hg-24520 mfg year- march 2021 type- p3-24 10202057 ratio: 225/1 ip rpm 1500 oil gr. iso vg 320 make- premium transmission pvt ltd , input shaft coupler, 1st stage, 1st stage ring, 1st stage sun gear shaft, 2nd stage, 2nd stage outer ring, 2nd stage sun gear shaft, motor flange, 5.rbc gear box (complete) make- premium transmission sr.no- hgf-81207 mfg year-16.01.2022 type- sxh3-20 rhb-acw ratio-35.5:1 p2 rpm-1500 wt-290 kg , 6..surplus gear box (complete) make- premium transmission sr.no- hgf-81206 mfg year- 16.01.2022 type- sxh3-16 rhb-acw ratio-35.5:1 p2 rpm-1500 wt-164 kg , 7... bc-01 gear box (complete) make- top gear transmission model- 3725hx ratio- 166.95 code no- ffh3725hx166.9571904 sr.no- 21030145 , 8..rav gear box complete make- radicon type- amd 07-5s kw- 0.75 sr.no- 19/347251 rpm- 1450 actual ratio- 75.121 output torque- 334.0 , 9..batch pan mech. circulator gear box complete. sr. no. hgf-77309 type-vb3sa-250 ratio: - 31.4: 1p1 i/p rom: - 1500, type- helical make-premium transmission. , 10..gear box below complete. sr. no. hgf-77309 type-vb3sa-225 ratio: - 31.4: 1p1 i/p rom: - 1500, make-premium transmission. , 11. planetary gear box complete model: 420horgm sr.no: 21037406 ratio: 1459.84:1 make- top gear transmission , 12. magma mixer planetary gear box complete model: 250horgm sr.no. 210374428 ratio: 87.45:1 make- top gear transmission , 13.. lime preparation tank planetary gear box with motor complete in all respect model: 3280 raio: 92.016:1 make- top gear transmission , 14..raw sugar pugmill planetary gear box with drive complete in all respect model: 280horgm ratio: 358.91:1 make: top gear transmission , 15..slat conveyor u type gear box with motor complete in all respect model: a-337 type- u type ratio: 30:1 make: premium , 16.. sugar bag conveyor u type gear box with motor complete in all respect model: u-500 type: u type ratio: 50 make- premium , 17..sugar bag conveyor u type gear box with motor complete in all respect model: u-600 type: u type ratio: 60 make- premium , 18..sugar bag conveyor u type gear box with motor complete in all respect model: u-400 type: u type ratio: 50 make- premium , 19..sugar bag conveyor u type gear box with motor complete in all respect model: u-800 type: u type ratio: 70 make- premium , 20..sugar elevator planetary gear box (one side rotation) with motor complete in all respect model: 2300hbx ratio: 45:1 make: top gear transmission , 21..fbd elevator planetary gear box (one side rotation) with motor complete in all respect model: 3260hbx ratio: 61.62:1 make: top gear transmission , 22..conveyor belt gear box with motor complete in all respect model: 600 vorxgm ratio: 2856.2 make: top gear transmission

Central Government/Public Sector

CTN :45260710

10 Jun, 2026 NA

Dombivali - Maharashtra

Tender For providing of custom bid for services - outsourcing of cook skilled and water carrier semi skilled for the use of imparting initial training of 200 constable recruits at stc 12bn rpsf thakurli

State Government

CTN :45228145

03 Jun, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For supply of ci cs casted items - c.i. casted items on new basis, c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling different size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, c.i. casted items (on conversion basis), c i door of boiler as per drawing no ksc/blr/door/35tph approx weight 50 kg suitable for working apto 800 degree centigrate, c.i. tool post of plainer machine approx weight 18 kg each, c i bagasse chuite of boiler as per drawing no ksc/blr/chuite/35tph approx weight 160 kg suitable for working apto 800 degree centigrate (duly machined), c.i. idler for cane carrier (i) as per drawing no. ksc/cc1/4/17, c.i. pulley (as per drawing) with machining, c.i. coupling difrent size (as per drawing), c.i. casting various size (gulla) as per drawing with rough machining. different size, cast steel spur gear & pinion new basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sprocket- 13 teeth 6 pitchas per drg. mills-27, cast steel pinion- 18 teethface width- 75mm, bore- 45mm od- 128 mm, module- 6.4.approx weight 5 kg, c.s.scaper for mills duly machined as per sample drg.no ksc/mh/91618 approx wt-190kg each, cast steel trash plate (lenth 1680 mm) made of is 2708 grade iii duly rough machined as per drg.no ksc/mh/285/22, c.s. wheel for cane unloader bridge as per drg.no. ksc/unloader/2/17.approx wt 185 kg., c.s gear 68 teeth, module-6.14face width-65mm, o.d--430mmdrg no.-ksc/unloder/17, c.s.wheel for cane unloder trolly drg no.-ksc/cr/145 approx.wight-55kg, c.s.pinion-18teeth, module-6.14, f.w-65 od-122.8 drg. no.-ksc/unloder/17, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1565 (tail end) material 2708, c.s. sprroket 6" pich 14 teeth drg no.-ksc/m/1564 (driving shaft) material 2708, c.s.sproket-36 teeth for duplex chain 2 1/2" pitch material 2708 drg no ksc/boiler-163, c.s. sprocket 17 teeth for duplex chain 2 1/2" pitch material 2708 drg no-ksc/mill/4887, opertuinity device of trash turner beam material-ss drg no. mills-8488, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-10, fw-110mm od-260mm bore-50mm, c.s. pinion duly hardent tempered and grinded- 24 teeth, module-8, fw-120mm od-208 mm bore-50mm, c.s.worm shaft ( as per sample) for mill, c.s. mill coupling (weight 700kg approx) as per drawing, c.s. mill crown pinion 16 teeth (weight 1500 kg.) as per drawing, cast steel spur gear & pinion on conversion basis, c.s. trash beam for mill size 33"x66" as per drawing approc weight 1 mt, cast steel & spur gear- 72 teethface width- 75mm, bore- 50mm od- 473 mm, module- 6.4. approx weight 90 kg, cast steel & spur gear- 26 teethface width- 75mm, bore- 45mm od- 178.24 mm, module- 6.4- approx weight 11.6 kg, cast steel pinion- 24 teethface width- 70mm, bore- 45mm od- 166.4 mm, module- 6.4 -approx weight 9.7 kg, cast steel pinion- 34 teethface width- 75mm, bore- 40mm od- 308 mm, module- 8.56. approx weight 20 kg, cast steel gear pinion- 50 teeth as per drg no. mills-138approx weight 11 kg, cast steel sproc

Co-operative

CTN :45096137

20 May, 2026 NA

Udhamsign Nagar - Uttarakhand

Tender For c.s. item on conversion and supply basis and forged steel item - c.s coupling having material as per is:1030 grade 280-520w for mill size 30"x60" as per drg. no. supply basis, conversion basis, machining charge, cast steel crown pinion having material is:2708 grade-iii-b for mill size 30"x 60" as per drg. kcp-mh-70 and texmaco mh-32supply basis, conversion basis, machining charge, c.s.trash plate having material as per is:1030 and grade-iii-b as per drg. kcp-mh-13-ii and texmaco mh-13-isupply basis, conversion basis, machining charge, teeth cutting/grooving of trash plate, as per drg., c.s.trash beam as per is-1030/is 2708 as per drg. kcp-mh-84-r and texmaco mh-36supply basis, conversion basis, machining charge, forge steel tail bar for taxmaco and kcp mill having material c-40/8 as per drg. mh- 6 & mh-56supply basis, conversion basis, forge steel pinion for transmission gear of taxmaco mill as per drg. no. mh 39,material en-24,tensile strength70-80 kg./sqcm, hardness 200-220 bhn, c.s.bearing housing for taxmaco mill as per drg no mh-17-b for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79for side roller housing supply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-31for top roller housingsupply basis, conversion basis, c.s.bearing housing for k.c.p.mill as per drg no mh-79 for bottom roller housingsupply basis, conversion basis, c.s.gear coupling for c/f machine as per drg.no.bh-14 (duly case hardness), c.s. pinion for cane unloader as per drg, cu- 16teeth-17, teeth -18, c.s.sprocket 2" pitch (both pilot bore)(i) no of teeth 18 , boss dia 3", (ii) no of teeth 36 , boss dia 6", c.s.sprocket for boiler rotary feeder pitch- 25.0 mm,no of teeth 21, od -180mm. p.b -25 mm, as per drg. blr-73/1, c.s.sprocket/gear for bagasse elevator (pilot bore) pitch 50.8 mm,no of teeth 50, od 842.70mm. pcd 808.7mm,teeth thickness 28mm, boss- 270x130 mm, as per drg. mh-75, cs sprocket (pilot bore) as per drg.blr-62 pitch 50.8 mm, no.of teeth-14 pcd 226.49mm, od 258.8mm, for bagasse elevator drive, static coller of 25 mm thick duly hard faced of 5 mm thick layer . total thick 30 mm after hard facing for taxmaco & kcp mill as per drawing no. mm 105(i) m.s. material, (ii) c.s.material, sprocket of inter carrier od 280 mm,no.of teeth 45.pitch 19.5 mm, c.s. sprocket (duplex) for inter carrier, as per drg. mh-72, teeth 12, od-302mm, pcd- 290mm, rd-242 mm, pitch-75mm, b1 100mm, b2 75mm, s.s. wear plate is 304 quality, as per drg. mh-60(i) length 435 mm x width 370 mm x thick 15 mm, (ii) length 385 mm x width 330 mm x thick 15 mm, c.s.tresh beam bracket as per sample /drg. mh-90 (texmaco), c.s.eccentric pin trash bar adjusting device as per drg. mh-133/2024-25, c.s. trash beam adjusting connecting rod for taxmaco mill, as per drg. mh- 297, c.s. bridge wheel for cane unloader as per drg. cu25 (1),, trolly wheel for cane unloader as per sample /drg. cu-26-ii, pinion gear set for cane unloader as per sample /drg, c.s. pinion (gear) for rbc cross carrier pitch 41 mm. teeth 25 , type of teeth in valute (spur) module 12.7 mm width 125 mm .od 343 mm, bore 2" dia as per drg. mh-200716, clutch shaft for mill. as per drg. mh-76 , en-8for taxmaco mill -sl.no.2, for kcp mill - sl.no.1, cs worm for crystilizer wheel od 290 mm, bore 81 mm.pitch 80 mm complete as per drg. mh-39-r, groving of c.s. trash plate as per drg., idler wheel gear for cane unloader., no of teeth 68, od-420 mm, module-6, pitch- 18.84 mm, pcd-408 mm, as per drg. no. cu-25 (i), pinion for cane unloader no. of teeth- 33, od-210 mm, pcd-198 mm, pitch- 20 mm, module-6 as per drg. no. cu-16-r, pinion for cane unloader no. of teeth- 18, od-200 mm, pitch- 35 mm, bore- 50 mm, width-115 mm, module-6, teeth depth-25 mm as per drg. no., break stand complete for cane unloader, size-10", cs sprocket of rbc, as per drg. blr 32/93, od- 646mm, pcd-573mm, rd-497mm, nos of teeth 12, pitch-150.00mm, chain sprocket for int

CTN :45099498

28 May, 2026 38.35 Lacs

Gorakhpur - Uttar Pradesh

Tender For providing of custom bid for services - horticulture wok in training centre & bn area of 2 bn as per attached scope of work,custom bid for services - linen cleaning in 2bn & rpsf &rpsf/tc/gkp as per attached scope of work,custom bid for services - outsourceing of 02 nos water carrier staff against existing vacancy of rpsf/tc/gkp as per attahced scope of work

corporations/Associations/Others

CTN :45033537

14 May, 2026 NA

Meerut - Uttar Pradesh

Tender For providing of bagasse bungas (session 2026-27) - 2025-26 session, the estimated residual loose bagasse—amounting to approximately 38,000 quintals—must be collected at the designated location and stacked in a pyramid-shaped mound. this mound is to be secured using polythene sheeting and ropes to form a square enclosure; additionally, the upper surfaces of the bagasse must be covered with netting. furthermore, a protective structure (*bunga*) is to be constructed around the stack by erecting bamboo posts and covering the assembly with thatch. this structure must be bound securely in such a manner that rainwater is prevented from penetrating the interior, thereby ensuring the safety and preservation of the bagasse. the *bunga* should be designed to accommodate the maximum possible volume of available bagasse. any surplus bagasse currently scattered across the concrete floor—as well as that extending beyond the floor onto the unpaved ground (covering an area of 3–4 meters)—and the bagasse scattered on both the unpaved and concrete surfaces on the opposite side of the conveyor (towards the kharkhoda road) must all be consolidated. this entire quantity of bagasse must be pushed onto the paved floor (specifically in front of the feeding point of the return bagasse carrier) and extended approximately 10 meters further along the paved floor to construct the *bunga*, thereby safeguarding the bagasse against spoilage during the rainy season. all expenses associated with the aforementioned tasks shall be deemed subsumed within the overall cost allocated for the construction of the *bunga*; no separate or additional payment shall be admissible for these activities.

Water Carrier Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Co-operative

corporations/Associations/Others