Tender For submission of a rate schedule for machinery and equipment to prepare an estimate for installing rainwater harvesting systems in stormwater lines and low lying areas along main and internal roads within the municipal corporation limits. - item name, providing and constructing recharge pit of 2.0m deep and 1.0m dia of precast rcc rings with 6.5 dia. x 25m deep bore well at the floor of recharge pit including providing and supplying one complete ai-enabled single integrated modular smart groundwater recharge unit with recharge-volume measurement, real-time clog monitoring, recharge-waterqualitymonitoring, soil quality / site suitability assessment, iot communication, ai dashboard and gis monitoring platform, suitable for urban rainwater and storm water groundwater recharge applications. the supplied unit shall be a single integrated smart recharge unit and shall not be a combination of disconnected or separately assembled devices. all field-level hardware, sensors, filtration arrangement, sedimentation section, recharge-volume measurement system, real-time clog monitoringsystem, recharge-waterqualitymonitoringsystem, iot controller, communication module, qr/gis asset identification and data communication components shall be integrated within the supplied smart recharge unit and shall operate as one complete system. the ai dashboard, gis monitoring platform, cloud hosting, sim/data communication and software support shall be digitally integrated with the supplied unit for live monitoring, alerts, analytics and reporting. internal components shall not be treated as separate payable items. the main body / modular assembly of the unit shall be made primarily from hdpe/frp / upvc or equivalent corrosion free material and shall be suitable for long-term contact with rainwater / storm water, groundwater recharge applications and repeated cleaning. the unit shall be corrosion-resistant, water-resistant, durable and easy to maintain. the unit shall be modular, removable, reusable and serviceable. the design of the unit shall enable cleaning, sediment removal, filter inspection, filter-media replacement, sensor inspection and refitting without damaging the surrounding civil structure, chamber or recharge arrangement. the unit shall have a minimum external diameter of 750 mm and minimum overall height of 2000 mm with frp cover of suitable size having 40 mt capacity. the unit shall have sufficient internal space for filtration arrangement, sediment holding, recharge-volume measurement, real-time clog monitoring, water-qualitymonitoring, iot components, sensor housing, cleaning access and maintenance. the unit shall include multistage filtration, debris arrest arrangement, first-flush / bypass provision, sedimentation and silt-management section, recharge-volume measurement system, recharge-rate monitoring, real-time clog monitoring, recharge-waterqualitymonitoring after filtration and before recharge, soil quality / site suitability assessment module, iot-based data communication, qr, gis asset identification, ai-enabled web dashboard, gis monitoring platform. the unit shall be capable of measuring, recording and reporting actual recharge volume, recharge-rate trend, sedimentation status, clogging condition, recharge-waterquality parameters, soil / site suitability parameters, unit health, sensor health, battery status, communication status and maintenance status on a web-based dashboard. the item shall be treated as one complete integrated smart unit. internal components such as hdpe/ frp modular body, filtration arrangement, sedimentation section, measurement systems, sensors, iot controller, communication module, ai dashboard, gis platform, cloud hosting and sim/data support shall not be measured or paid separately. the unit shall have authentication from any govt. institute like c.o.e.p./cw&prs/gsda etc. the unit shall be supplied with five years warranty against manufacturing defects, material defects and functional failur
Tender For supply of oil in water analyser spares procurement for dmp-3 to m/s. forbes marshall pvt ltd, as per mrpl tender terms and conditions - bulkhead union elbow in pp, connection 3/8" od, for inlet & outlet tube, awa-he750-fm, neoprene tube 6.4x9.6mm-imtr length, awa-he720tubec-fm cleaning pump tubing with connectors novoprene, waterqualitymonitoringsystem spare mvux card for cod analyzer at373524n, part number: awa-he170s, strainer set spares for forbes marshall cx6000 series oil in water/phenol analyser, part number:awa-me610, water detector set, cleaning reagent flow detector with cable. spares for forbes marshall cx6000 series o, part number:awa-ea330, pcx1 microprocessor without display board spares for forbes marshall cx3000, series cod/bod/tss analyser, part number: awa ea306-fm, 4-20ma double output module spares for forbes marshall cx6000 series oil in water /phenol analyser an, mpa analyzer internal & external tubing., 1)sample tube-1meter. 2) clean tube-2mtrs & pump tube with connector.3)catch pot tube-, part number:awa-cx2he111, canister s lit. spares for forbes marshall cx6000 series oil in water/phenol analyser and cx3000 seri, part number awa-ee8395, xenon lamp box set (xenon, trigger, board, filter and box)-lnternal. spares for forbes marshall cx6000 5
Tender For annual maintenance contract (non- comprehensive) for online effluent waterqualitymonitoringsystem of unit no. 1 and 2 of 2x600 mw, sstpp, mppgcl, dongalia.
Tender For corrigendum : providing of testing of waterquality - annual maintenance contract of online waterqualitymonitoringsystem operation or data transmission etc for one year; as per specification
Tender For corrigendum : purchase of equipments for mechanical department - purchase of equipments for mechanical department, tail stock assembly medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, working model of fuel supply system - petrol mpfi type petrol multi point fuel injection (mpfi) system for dismantling and assembly practice system type: non-working / cut-section model for study of internal construction construction: actual automotive components or equivalent training model mounted on frame includes throttle body (sectioned), fuel injectors, fuel rail, intake manifold includes fuel pump, fuel tank (dummy), fuel filter, pressure regulator includes ignition system components: ignition coil, spark plug, distributor (if applicable) ecu module (dummy/display type) with wiring layout representation all components cut-open, painted, and clearly labelled provision for manual demonstration of flow path and component interaction mounted on rigid ms powder-coated frame designed for repeated dismantling, assembly, and component identification, hydraulic cylinderbore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply: mounted on training base suitable for dismantling and inspection, hydraulic operated directional control valves (dcv) type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study, bearing with shaft assembly type: dismantling and assembly teaching unit shaft diameter: 30 mm shaft material: en8 steel bearings: deep groove ball bearing (6205 / 6206) housing: cast iron locking arrangement: circlips end covers mounting: bench-mounted / frame mounted unit, coupling unit using driving and driven shafts using plummer block bearing unit the plummer block housing material: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing). sealing: felt seals or v-ring seals (to demonstrate lubrication retention). lubrication: provided with a grease nipple at the top center for manual lubrication practice. the bearing type: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series). bore diameter: standard 25mm or 30 mm. shafting and coupling shaft material: ground carbon steel (en8 or en9) for high surface finish. coupling type: flexible coupling: to demonstrate the bearings ability to handle slight misalignment. rigid flange coupling: to demonstrate traditional direct connection. driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter
Tender For audyanik proyog avam prashikshan kendra saharanpur mein nirmaanadhin shahad utkrishthta kendra se sambandhit machinery or parts ki apoorti or establishment ka karya - supply & installation of automatic honey bottling filling machine with sensor based calibrator including with filling range (50 grams to 1000 grams), outout/min (any size within range 3000 to 5000 bpd), filling system (pneumatic vmp system synchronize with servo motor), direction of movement (left to right), number of head/syringe (single), drop controller (y- pneumatic stopper), calibration of machine (automatic with sensor), inlet material stopper (fg valve), feed tank (direct connected), feed tank overflow controller (float type), material feed in m-tank (automatic), heating arrangement in m-tank (water bath system), material shaker in m-tank (electrical shaker), bath temperature & material temperture monitoringsystem (full auto-control with ccp), electric spply (230 cm v/50hz), tempreture controller (pid), machine dimensions (250 cm x 100 cm x 210 cm (approx) and net weight (300 kg). etc all complete with isi marked., supply & installation of automatic linear capping machine including with output/hour (any size with range 4000 bpd), direction of movement (left to right ), machine dimensions (180 cm l x 90 cm w x 170 cm h (approx)), sensor (panasonic), pneumatic accessories (spac) and no bottle- no cap (yes). etc all complete with isi marked., supply & installation of automatic round bottle sticker labelling machine including with output/hour (10000 bpd), direction of movement (left to right), controlling (micro controller base mm interface), conveyor motor (0.25 hp/415 v/ 50 hz), pressing device motor (60 watt / 220 v/ 50 hz), servo motor (750 watt), label accuracy (+/-1mm), gap sensor (u-type), bottle spacer (electronic), variable speed (40 bpm-max), hmi & plc (7 inch coloured touch pad type), pneumatic (spac), pressure roller (sillicon), adjustment (lead screw), label size (up to 100 mm width), bottle dia (up to 120 mm dia), batch counter (yes) and online data indication (yes) etc. all complete with isi marked., supply & installation of air compressor including with type (reciprocating), tank volume (250 ltr), pressure range (10 kg/ cm 2), no of head-(02 nos.), type (industrial) and operation (continue) etc. all complete with isi marked., supply & installation of induction sealing including with automatic induction sealing machine etc. all complete with isi marked., supply & installation of turn table including with 750 mm dia turn table moc ss304, motor - 0.5 hp/440 vac, vfd - invt/delta and model -cgmp etc. all complete with isi marked., supply & installation of packing conveyor including with 10 feet long packing coveyor, width of conveyor 300 mm, motor - 0.5 hp/440 vac and model - cgmp etc. all complete with isi marked., supply & installation of auto honey feed pump including with automatic honey feed system for filling machine from plant etc. all complete with isi marked., supply & installation of bottle washing machine including with automatic bottle cleaning machine tilting action type etc. all complete with isi marked., supply & installation of particle inspection table including with online particle checker etc. all complete with isi marked., supply & installation of online printer including with online ink jet printer etc. all complete with isi marked., supply & installation of slate chain conveyor including with ss304 slate chain conveyor, motor - 0.5 hpx 3 nos, vfd - 3 nos and guider - as per design etc. all complete with isi marked., supply & installation of automatic wax sheet foundation mill including with sheet making roller set (cell size 5.4 mm, length ,600 mm, dia 200 mm), cold water circulation system 0.5 hp, conveyor belt length - 300 mm, sheet cutting system, water cooling system 1.5 - ton cap, wax malting tank, wax filtration system, ss tray, ss bucket, operation by hmi, dat
Tender For supply of mechanical department lab items - mechanical department lab items, 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps time lapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter
Tender For mech dept lab items dept use - 3d printing machine build volume(wxdxh) 256 x 256 x 256 mm shell enclosed (plastic & glass) hot end all-metal nozzle 0.4 mm stainless steel included max hot end temperature 300 nozzle diameter 0.4 mm (included) 0.2 mm, 0.6 mm, 0.8 mm build plate compatibility textured pei plate, cool plate, engineering plate, high temperature plate max build plate temperature 100 max speed of tool head 500 mm/s max acceleration of tool head 20 m/s supported filament pla, petg, tpu, pva, pet, abs, asa chamber monitoring camera low rate camera 1280 x 720/0.5fps no 90000 timelapse supported filament run out sensor :yes control board fan closed loop control auxiliary part cooling fan closed loop control air filter activated carbon filter