Latest water basin Tenders | Government water basin Tenders

Central Government/Public Sector

CTN :45736723

22 Jul, 2026 NA

Kota - Rajasthan

Tender For supply of vertical air receiver: capacity 1000 litre, working pressure 15 kg/cm2 with hydrostatic test report with calibrated pressure gauge, safety valve, drain valve and anchor fasteners. make: colt or equivalent reputed brand. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45435372

06 Jul, 2026 50.86 Lacs

East Nimar - Madhya Pradesh

Tender For corrigendum : work contract for external surface painting of air receiver tanks and associated lines (installed near air compressor house and foph area) and ash slurry pipe rack up to ph-ii chimney, at 2x600mw, sstpp, mppgcl, dongalia.

Central Government/Public Sector

CTN :45713851

25 Jul, 2026 55.00 Lacs

Dappar - Punjab

Tender For repair/maint of air cooled ac plants, chiller, condenser pump, hot water boiler, ahu, water colled ac plants, motor, hwg and ahu alongwith connected items at akash complex/tech area at dappar under age(i) dappar - material and labour for servicing / cleaning of air cooled ac plants of 50 tr capacity, chiller unit, cleaning and washing of cooling coil with fins using a chemical c-shine (alkaline coil cleaner and brightener) and testing the unit (once in a three months) complete all as specified and as directed by engineer-in-charge. location :- akash air cooled ac plants(once in a three months), material and labour for descaling of complete condenser units for central/ package type ac plants of condenser unit of water cooled ac plantac plant upt to 40 tr capacities by means of adding descaling chemical solution (hcl) or equivalent into the cooling tower sump as per requirements, and running the plant pump continuously till all the scale of pipes/shell are removed including removing side covers of condenser and cleaning the water tubes by means of nylon brushes till the scaling is removed and refixing of covers including replacement of neoprene rubber gasket and refixing pipe connection etc. to entire satisfaction of engineer-in-charge complete all as specified and as directed by engineer-in-charge. location :- old, 3ac igloo ac plant and new ac plant (once in a three months), material and labour for cleaning of cooling tower existing size, water basin and makeup tank with the help of chemical and nylon brush, removing and refixing of pvc finches after washing, cleaning of condenser pipe line ( inlet and outlet) including painting of out side of cooling tower with inlet and outlet pipe line with one coat synthetic enamel paint of colour approved by engineer in charge and inside painting of water tank of cooling tower using water proof black japan paint one coat including changing of unserviceable pvc guard, water distibutor, pvc pipe, and all connected minor items of up to 100 tr capacity of the ac plants at different locations complete all as specified and as directed. location :- old and new ac plant, material and labour for servicing of cooling coils and air filters of ahus intalled at air conditioning plant by removing air filters and fixing after cleaning with air blower and water and cleaning agent , cleaning of cooling coilwith wire brush and air blower and water spray pump after spraying scale gun or equivalant chemical suitable for aluminium fins and straighting the fins of cooling coil by using suitable brush for any capacity of ahu complete all as specified and as directed by engineer-in-charge. locaton :- new ac plant, old ac plant , 3 ac igloo ac and akash ac plants akash, material and labour for servicing / cleaning and testing of electrically operated pan type humidifier capacity 9 kw alongwith all necessary items fitting and all suitable / all necessary electrical wiring from electrical panle to humidifier complete all as specified and as directed by engineer-in-charge. location :- akash ac plants, material and labour for servicing / cleaning and testing of pressurization unit in cold water line ( psu-225 as per site) alongwith all necessary items fitting and all suitable / all necessary electrical wiring complete all as specified and as directed by engineer-in-charge. location :- akash ac plants, material and labour for servicing / cleaning and testing of pressurization unit in hot water line ( psu-225 as per site) alongwith all necessary items fitting and all suitable / all necessary electrical wiring complete all as specified and as directed by engineer-in-charge. location :- akash ac plants, material and labour for servicing , cleaning , and greasing , chiller , hwg pumps , ahu and ct motors alongwith all necessary minor items/ fitting i.e bearing , star coupling , screws , nuts and bolts etc complete all as specified and as directed by engineer-in-charge. location :- new ac plant , old ac plant and air coole

CTN :45713110

07 Jul, 2026 NA

Gurdaspur - Punjab

Tender For supply of foxeer predator 5 micro fpv camera , foxeer m10q 180 gps 5883 compass , hglrc zeus vtx 2 point 5w , 2 pcs speedy bee 5 point 8 ghz antenna v2 2 pcs mmcx straight , pro range propellers 7535 3 glass fiber nylon props , pro range propellers 14 point 8v 5200mah 40c 4s lithium polymer battery pack , micro air 743 v2 am 3270a 30x30 fc and esc stack , xing 2212 1300 to 1400kv , radio master rp v2 tcxo express lrs 2 point 4 ghz nano receiver , free style frame kit 7 inch 295mm fpv carbon fiber freestyle frame kit wholebase 295m am 5 point 0mm suitable for long range drone , eachine ev 800d 5 point 8g 40 ch diversity fpv goggles , radio master pocket radio 2 point 4g elrs charcoal , allen key set precision tool kit 1 point 5mm 2mm 2 point 5mm and 3mm , portable soldering gear with wire 1mm and flux , adhesive electric tape 01 set vhb tape 01 set and zip ties 1 set , power bank 10000 mah , voltage tester hand held , smoke stopper , tweezer set

CTN :45011264

30 Jun, 2026 NA

Barmer - Rajasthan

Tender For bid to ras bid to ras supply of compressed air vertical air receiver 2000 ltr-60kg/cm2 , compressed air vertical air receiver 5000 ltr-12kg/cm2 , compressed air vertical air receiver 2000 ltr-12 kg/cm2 , compressed air vertical air receiver 2000 ltr- 7 kg/cm2

CTN :45713980

14 Jul, 2026 93.80 Lacs

Thoothukudi - Tamil Nadu

Tender For auction sale of plant and machinery - lot no : 1hypothecated assets:primary security: plant and machinery as detailed below: machinery:1.raw salt hopper -1 no.,2) drier supporting structure -1 no.3)raw salt belt conveyor-1 no.4)air heater with heat exchanger-1 no. 5)screw conveyor - 1 no. 6)brine water pump-1 no. 7)raw water pump - 1 no. 8)bucket elevator - 2 nos. 9)gyro screen-2 nos. 10)fludized bed dryer - 1 no. 11) elgi screw compressor - 1 no. 12)elgi vertical receiver -1 no. 13) elgi air dryer 1 no. 14) elgi filter set - 1 no. 15)automatic vffs packing machine 1 no.16) automatic vffs packing machine - 1 no. 17) automaticvffs packing machine - 1 no. 18)raw salt feed hopper - 1 no. 19)raller crusher - 1 no. 20) raw salt belt conveyor - 1 no. 21) pouch conveyor - 1 no. 22)product screw conveyor - 1 no. 23) structure for all equipment's 1 no. 24)supply of continuous centrifuge 1 no.25)dry mill - 1 no. 26)product screw conveyor - 1 no. 27) washing tank with mech agitator - 1 no. 28)wet mill - 1 no. 29) supply fan 1 no.30) exhaust fan-1 no.31)cyclone dust - 1 no.32) elutration tank - 1 no.33)product sylo - 1 no. 34) electrical switch box-1 no.

CTN :45696133

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for electronics and communication engineering department - supply of equipment for electronics and cmmunication engineering department, 8051 micro controller kit :specification : operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., temperaturemeasurementkitspecification : sensors:rtd (pt-100), thermocouple (fe-k/j-type), and/orthermistor (ntc). display: 3 digit led/lcd digital display(typically 200 mv fsd). temperature source: portable water kettle orheater block. signal conditioning: on-board circuitry foramplification, linearization, and cold junctioncompensation. test points: multiple 2 mm / 4 mm banana socketsfor monitoring input/output signals. power supply: 230 v ac, 50 hz, single-phase. accessories: glass thermometer, 10 k ntcthermistor probe, k-type thermocouple probe,patch cords and user manual., ask modulationanddemodulation kit:specification : message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz,amplitude 5 v. modulator type: switching modulator using analogswitch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., dth trainer kit:specification :power supply: 200 v to 240 v ac, 50 hz.dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter): input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency:tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m.controls: channel selection. volume control.fault simulation: five built-in simulated faults for troubleshootingexperiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption.pcb size: 15" 12" with multicolour section-wise blockdiagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna.additional features: dth subscription connection withdoordarshanfree channels. free-to-air channel demonstration., fpga trainer kit:specification : must use industry-standard mid-range fpgadevice usb-jtag programmable, compatible withvivado ise (webpack). power supply: 5 v dc through usb or externaladapter. on-board peripherals: leds, switches, pushbuttons, 7-segment display,clock source, gpio /pmod expansion ports, uart, vga / hdmi, usbuartbridge, usb cable. user manual.

Central Government And Public Sector

CTN :45709559

15 Jul, 2026 NA

Multi City - Multi State

Tender For air receiver tank of capacity 4 meter cube (4000 liters) as per following technical specifications.size of the shell: -diameter =1260 mm. height of the shell=3150 mm. 1. service: compressed air 2. capacity: 4000 liters 3. orientation: vertical 4. working pressure: 7.0 kg / cm2g 5. operating pressure: 6.0 kg / cm2g 6. hydro test pressure: 10.5kg/ cm2g 7. working temperature: ambient 8. design temperature: ambient 9. vessel dimension: a) diameter: 1260 mm, b) shell length: 3150 mm 10. thickness: a) shell: 10mm, b) dish: 10mm 11. fabrication code: is-2825/asmesecviiidiv1 12.materialofconstruction:is2062oraspertherequirement. 13 .valve: 150mm ball valve- 2 qty (with each air receiver). valve make- valvora/norflow /l&t /normex. 14. surface coating: internal: anticorrosion coating, external: one coat red oxide primer and 2 coats of enamel paint. 15. accessories included: suitable safety valves and pressure gauge. note: (1) air receiver shall be hydraulically tested as per is-2825/asmesecviiidiv-1, and test certificate shall accompany the supply. (2) necessary material test & guarantee certificates shall be submitted. (3) warranty: 24 months from the date of commissioning. (4) proper name plate indicating capacity, serial number, mfg date, max working pressure, test pressure, make etc. shall be provided on the tank. (5)inspection agency: tpi agency at firms works before dispatch. [ warranty period: 24 months after the date of delivery ] ]

CTN :45690310

10 Jul, 2026 NA

Farrukhabad - Uttar Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; servicing and overhaling ingersol rend make special repair no s 01460 type air receiver capecity 225 leter model no shp 089; buyer,repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; servicing and overhaling ingersol rend make special repair no nar 10563086 type air receiver capecity 125 cfm leter model no up5 22 7; buyer

CTN :45678844

04 Jul, 2026 1.20 Lacs

East Khasi Hills - Meghalaya

Tender For supply of drone c c - 7 inch frame carbon fibre , 7 inch propeller , radiomaster boxer , aerocell battery 6s1p 4500 mah serial no 15 , dji goggle n3 , qpt 1300 kv brushless motor , battery strap , radiomaster xr1 nano elrs receiver , gps m10i , dji 04 air unit pro , zerodrag nova boost stack f4 plus 55a am32 , geprc 5.8g 2.5w vtx pro , falcon 5 inch carbon fiber drone frame , falcon nv 1800 night vision camera , geprc m10i gps , radiomaster xr1 nano multi-frequency expresslrs receiver 2400 , t-hobby 1950v brushless motor , geprc 5.8g antenna rhcp sma 120mm , gemfan 5 inch hurricane 3 blade propeller , aerocell battery 4s1p 4500 mah , cell 18650 , gps m10q

Water Basin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government And Public Sector