Latest water booth repair Tenders | Government water booth repair Tenders

State Government

CTN :40233884

30 Jun, 2025 9.31 Lacs

Bardhaman - West Bengal

Tender For corrigendum : repairing of pump house and boundary wall with jungle cutting and concrete road of khandagosh piped water supply scheme under durgapur sub-division under burdwan division, phe dte. 3 nos pump house repairing

CTN :40813434

14 Jul, 2025 30.19 Lacs

Khurda - Odisha

Tender For supply of upgradation and installation of cctv along with accessories - full hd ir network bullet camera 5 mp , network video recorder 64 channel , surveillance hard drive minimum 10 tb storage each , network switch 8 port poe 10 100 1000 , ofc 6 core single mode , solid cable, cat 6utp, 4 pair, 23 awg cable 50 mtr 80 mtr and 100 mtr box , ofc patch cord sc lc , small form factor module , 24 port wall mounted liu fully loaded , 12 port wall mounted liu fully loaded , network rack , full hd flat led tv 75 inch , hdpe pipe 32 mm , ofc laying through hdpe pipe over head , fixing of rack with assembling , digging and resurfacing of soft soil , hard soil rcc concrete and road cutting , fiber optics jointing fusing splicing , 5 kva online ups with 20 nos 12v 120 ah batteries , 3 core copper flexible cable , 1.5 t humidity control device for cctv system 5 star , 15 feet ms round galvanized pole , supply of power accessories as per detail mention in scope of work , installation commissioning ) /bid number : gem/2025/b/6348091 * /dated: 21-06-2025 & & / bid document 1 / 25

CTN :40134775

26 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For bid to ras custom bid for services - 2 years so for isbl piping jobs-1) pre-fab : fillet j, pre-fab : butt joint (cs), pre-fab : rf pad cs weld joints, pre-fab: corrosion pad cs weld joints, pre-fab: corrosion pad (cs) with shoe, pre-fab: fillet joint (alloy steel) tig, pre-fab: fillet joint (ss) tig, pre-fab: fillet joint (dss/sdss) tig, pre-fab: fillet joint (inconel/monel) ti, pre-fab: butt joint (alloy steel), pre-fab: butt joint (ss), pre-fab: butt joint (dss/sdss), pre-fab: butt joint (inconel/monel), field: fillet joint (cs) tig, field: butt joint (cs), field: rf pad cs weld joints, field: corrosion pad cs weld joints, field: corrosion pad (cs) with shoe supp, field: butt joint (ss), field: butt joint (alloy steel), field: butt joint (dss/sdss), field: butt joint (inconel/monel), pre-fab : rf pad as weld joints, pre-fab : rf pad ss weld joints, pre-fab: corrosion pad ss weld joints, pre-fab: corrosion pad as weld joints, pre-fab: corrosion pad (ss) with shoe, pre-fab: corrosion pad (as) with shoe, field: corrosion pad ss weld joints, field: corrosion pad as weld joints, field: rf pad ss weld joints, field: rf pad as weld joints, field: corrosion pad (ss) with shoe supp, field: corrosion pad (as) with shoe supp, overlay patch - cs-upto 6mm thick, overlay patch - as/ss-upto 6mm thick, overlay patch - inconel/monel-upto 6mm t, inlay patch - cs - upto 6mm thick, inlay patch - as/ss - upto 6mm thick, inlay patch - inconel/monel - upto 6mm t, weld run - cs (tig), weld run - cs (arc), weld run - with ss/as electrodes, weld run - with ss/as filler, weld run - with dss/sdss filler, weld run - with dss/sdss electrodes, weld run - with monel/inconel filler, weld run - with inconel/monel electrodes, non-pressurized piping welding joint, bending of plate for patch welding jobs , hot bending of pipe/tube below 1.5" dia, cold bending of pipes/tube below 1.5" di, rolling of plate into pipe, replacement of structural beams/columns , replacement of structurals-angles flats , replacement of grating/chequer plate (by, replacment of gratings (with welding), pipe clamp fabrication, blind fabrication, plate flange fabrication, welding of pin holes/spot welding (excep, fabrication of sample cooler coil n repl, dp test(piping), dp test(other than piping), dp test - surface area/tube sheet, mobilization of closed proximity radiogr, radiography upto 1.5" dia. - rate applic, radiography - above 1.5" dia. and upto 3, radiography - above 3" dia. and upto 6" , radiography (above 6"), radiography(other than piping), stress relieving upto 1.5" dia. - applic, stress relieving above 1.5" and upto 3" , sr - (above 3"), sr (other than piping), mobilisation of wfmpt/ufdt equipment wit, wfmpt, ufdt, mobilization charges for digital radiogr, hardness test, replacement of hexmesh (shell connected , replacement of hex mesh (inside cyclones, manual cleaning of piping/eqpt, copper slag / grit blasting, painting of zinc silicate, painting of zinc phosphate, hiring of mobile crane, supply and operation of tractor trailer, supply and operation of jeep/pick-up tru, hiring of air compressor - weekly, running hour rate for air compressor, supply and operation of diesel de-wateri, blind removal/installation, threaded fittings, valve - dropping/ installation, insulation removal, hydro test of pipelines, system scaffolding - rate per block 2.5m, manway opening/box-up, cold cutting of pipelines, bolts cutting with hacksaw/grinding/gas , chipping - rcc/ refractory, chipping - pcc, pcc - 1:4:8 ratio, pcc - 1:1.5:3 ratio, rcc of 1:1.5:3 ratio, excavation and back filling, provision of concrete box to arrest leak, replacement of ss anchors, replacement of cs anchors, replacement of inconel anchors, unplugging as per operation, tech data entry services, addtnl hrs : tech data entry srvcs, cs welding crew at workshop/fabrication , cs welding crew at unit/site, cutting crew (gas cutter/grinder), rigging crew, ss/monel/inconel welding crew at unit/si, ss/as/monel/inconel welding c

CTN :40812375

30 Jun, 2025 9.48 Lacs

Davangere - Karnataka

Tender For material supply for construction of warehouse in bada gram panchayat in davangere taluk - bgd display board, bgd red oxide, bgd broken granite metal 10 mm, bgd broken granite metal 12.5 mm, bgd tools and plants and electrical charges at 2%, bgd hom of cutting and grinding machine, bgd add, bgd hom of welding and grinding machine, bgd corbon electrodes, bgd anchor bolts 750mm, bgd base plate / base plate, bgd gusset plates 6 mm thick, bgd ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre, bgd ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at 4.5 kg per metre, bgd unit cost as per the specification, formwork, centering & scaffolding for plastering & painting of new walls, bgd formwork, centering & scaffolding for beams & lintels of building, bgd formwork, centering & scaffolding for columns & piers, bgd add brush, putty, sand paper, roller at 5% on cost of paint, bgd plastic emulsion paint, bgd ms handles, bgd locking arrangments, bgd ball bearing for rolling shutters, bgd high tension coil, bgd suspension shaft, bgd side guides, bgd 18 gauge 75 mm ms laths of 2.8 m length, bgd add brush at 1% on cost of paint, bgd enamel metal paint, bgd add handling , loading and unloading at 2% on material, bgd add providing and removing scaffolding at 3% on labour, bgd painter class i, bgd ready mix primer paint (ready mix red lead paint), bgd welder grade i, bgd fitter class i, bgd ms flat, bgd m.s rods, bgd add hom of welding and grinding machine at 2% on material, bgd fabricator, bgd 5.50 mm thick plain glass, bgd cleat angles, bgd alluminium handles - 15 mm, bgd alluminium tower bolt - 20 cm, bgd pvc edge beading, bgd rubber beading for shutters beading, bgd aluminium window frame section 1.20 mm thick, bgd add handling , loading and unloading at 1% on material, bgd casurina poles 100 - 150 mm, bgd solid concrete blocks (40 x 15 x 20 cms)-4.00 n/sqmm, bgd gravel 2.36 mm/murrum, bgd stone chistler class ii, bgd mason class ii (with tools), bgd mason class i (with tools), bgd mixer (concrete small used in culvert), bgd boulders, bgd bond stone 20 x 20 x 45 cm, bgd size stone 20 x 20 x 25 cms, bgd binding wire, bgd tmt bars fe 500, bgd hom of vibrator 0.71 days, bgd plasticizer / super plasticizer, bgd mixer (concrete) - 1 cum capacity, bgd portland cement, bgd broken stone aggregate 12 mm to 10 mm size, bgd broken stone aggregate 20 mm size, bgd add watering charges at 1 % on material, bgd coarse sand (zone iii), bgd granite/trap broken metal 100 mm and down size

CTN :40819210

30 Jun, 2025 8.06 Lacs

Silvassa - Dadra And Nagar Haveli

Tender For providing and supplying furniture for type - v / c bungalow at tokarkhada - providing and supply of emerald leather-pure leather center tilt mechanism, upright position lock. ai die cast pedestal (office chair), providing and supply aristo tbl 1200 x 600 (office chair), providing and supply gayle coffee table black (teapoy), providing and supply victoria coffee table walnut, providing and supply 205 wicker outdoor sofa set (model no.gc-205), providing and supply 203 wicker outdoor sofa set, providing and supplying wicker swing (zula), providing laying artificial lawm(6 mm), supplying and stacking of good earth at site including royalty and carriage upto 5 km lead (earth measured in stacks will be reduced by 20% for payment)., providing mirror polish to wooden furniture, providing and fixing 5mm mirror glass with polish, providing and fixing 5 mm bracket for glass fixing, replacing of dining chair leather with labour charges, excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 meter lead.(b) dence or hard soil, providing and laying cement concrete 1:3:6 ( 1-cement : 3- coarse sand : 6- hand broken stone aggregates 40 m nominal size) and curing complete excluding cost of framework in (a) foundation and plith, providing and laying controlled cement concrete m.200 and curing complete excluding the cost of formwork and reinforcement for reinforced concrete work in (a) foundation, footings, base of columns and mass concrete, brick work using common burnt clay building bricks having crushing strength not less than 35 kg./sq.cm. in foundation and plinth in cement mortar 1:6 (1- cement : 6 -fine sand)(b) conventional + extra for brick work in superstructure above plinth level upto floor two level (b) conventional, providing 15mm thick cement plaster in single coat on rough (similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) cement mortar 1:3 (1-cement:3-sand), steel work, welded in built up sections framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (a)in beams and joists, channels angles tees, flats, with connecting plates or angle cleats as in main and cross beams. hip and jack rafters, purlins conneted to common rafters and the like, providing corrugated g.i. sheet of class-3 roofing fixed with glavanished iron j or l hooks, bolts and nuts 8mm diameter with bitumen and g.i. limpet washer or g.i. limpet washer. filled with white lead complete excluding the cost of purlins, rafters and trusses.(1) 0.80 mm thick sheet., providing and fixing to wall ceiling and floor 10.0 kg. f/cm2 working pressure poluthene pipes of the following outside dia. low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(g)110 mm, providing and supplying for washing machine as approved by and engineer in charge, providing and supplying for wooden box bed (king size) as approved by and engineer in charge, providing and supplying for mattras (ortho 6") as approved by and engineer in charge, providing and supplying for side table as approved by and engineer in charge, providing and supplying for pillow as approved by and engineer in charge

CTN :40703166

04 Jul, 2025 NA

Pune - Maharashtra

Tender For supply of commercial or mr plywood is 303 grade 8ft x 4ft x 4 mm , commercial mr plywood is 303 grade plywood 8ft x 4ft x 6 mm , commercial mr plywood is 303 grade 8ft x 4ft x 12 mm , commercial or mr plywood is 303 grade 8ft x 4ft x 18 mm , commercial or mr plywood is 303 grade 9ft x 6ft x 12 mm , waterproof or bwr plywood is 303 grade 7ft x3ftx12mm , commercial or bwr plywood is 303 grade 7ft x4ftx12mm , sunmica size 4ftx8ftx 1mm wood colour , sunmica size 4ftx8ftx 1mm black colour , sunmica size 4ftx8ft x 1mm white colour , 2nd class well seasoned hard wood scanting of size 1.5inch x 4inch x 7ft long , 2nd class well seasoned hard wood scanting of size 3inch x 2inch x 7ft long , 2nd class well seasoned hard wood scanting of size 2inchx3inch x12ft long , 2nd class well seasoned hard wood scanting of size 3inchx3inch x12ft long , 2nd class well seasoned hard wood planks of size 12inch x 1.5inch x 12ft long , 2nd class well seasoned hard wood planks of size 12inch x 1inch x 12ft long , 2nd class well seasoned hard wood scantling of size 4inchx3inchx12ft long , 2nd class well seasoned hard wood scantling of size 1.5inchx3inchx12ft long , 2nd class well seasoned hard wood scantling of size 1.5inchx4inchx12ft long , pre laminated particle board 8ft x 4ft x12 mm , pre laminated particle board 8ft x4ft x18mm , hard wood beeding 1.5inch x 0.50inch , moulded wood beeding 20 mm x 8 mm , pvc edge band tape 0.5 inch thick , pvc edge band tape 0.75 inch thick , countersunk flat head screw 0.50 length for acp panelling , countersunk flat head screw 1inch length for acp panelling , 3 m double sided tape , pvc gitti white 25 nos per box , silicone sealant for acp sheets , alumunium groove cutting blade 10 cm dia , masking tape 1inch width , drill bit 2mm for iron , drill bit 3mm for iron , drill bit 4mm for iron , drill bit 5mm for iron , drill bit 6mm for iron , screw driver 12inch , screw driver set star type , half chizel , hammer ball pin 400 gm , claw hammer 510 gm , iron wood planner 18inch , bosch 4inch 670 w angular grinder , carpenter edge 1.25 kg , bench vice 4inchx 8inch , wood work vice 7ft long , g clamp , hammering concrete bit 4 mm , hammering concrete bit 5 mm , hammering concrete bit 6 mm , hammering concrete bit 8 mm , hammering concrete bit 10 mm , hammering concrete bit 12 mm , blade 7inch for bosch eco circular saw blade gks 190 , blade tct circular 7inch dia circular saw blade for acrylic sheet cutting , 10inch dia circular saw blade , star screw driver kit , steel allen key set , hex driver power drill socket for self driven screw , check nut for sd screw , ibell gasoline chainsaw 56 cc magnesium alloy crank case 18inch guide bar length with chain , blade grinders essential machine , grinding wheel for blade grinder , bh2 screw dirver plus and minus bit , triangular file 4inch , half round file 12inch , right angle 12inch , steel measuring tape 3 m length , steel measuring tape 5 m length , steel measuring tape 15 m length , ft30 fiberglass top line measuring tape 30mtr , heatex , vacum handle for glass , bush for table dsize //bid details 2 / 50

CTN :40786487

27 Jun, 2025 4.67 Lacs

Belagavi - Karnataka

Tender For supply of materials for improvements of smashan of survey no 313 in kudremani village - broken stone aggregate 40 mm size,, broken stone aggregate 20 mm size,, broken stone aggregate 12 mm to 10 mm size,, coarse sand (zone iii),, portland cement,., mixer (concrete) - 1 cum capacity.,, silver oak, or equivalent planks 38 mm thick.,, jungle wood runners and plank.,, casurina poles 75 - 100 mm dia., plasticizer / super plasticizer.,., hom of vibrator 0.71 days.,, casurina poles 100 - 150 mm.,, burnt bricks class 35 (non modular).,, mixer (concrete small used in culvert.), tmt bars fe 500,., binding wire,., ms angle iron 50mm x 50mm x 6mm, 33.8 metre in length at4.5 kg per metre, ms angle iron 40mm x 40mm x 6mm, 23 metre in length at 3.5 kg per metre,., gusset plates 6 mm thick., base plate/ base plate, anchor bolts 750mm.,, corbon electrodes.,, welder grade 1., hom of welding and grinding machine.,, add,, hom of cutting and grinding machine.,, ready mix primer paint (ready mix red lead paint)., painter class i.,, enamel metal paint.,, unit cost as per the specification,, laboratory asst. (sslc passed)/mate/supervisor,, tractor - 40 hp.,, water.,., gravel 2.36 mm/murrum,, water tanker,, vibratory roller 8 tonne,., crushed stone course aggregate 53.,, granite metal 40 mm.,, granite metal 20 mm.,, crushed stone chippings 13.2 mm.,, cobble stones of 75mm thick,, mason class i (with tools).,.,, plate vibrator having 3 ton compaction force,, coarse aggreages 12 mm,.,, seperation membrane of impermeable plastic sheeting 125 micron thick, sealant primer,, joint sealant,, super plasticizer admixture is marked as per 9-103, needle vibrator.,, screed vibrator .,, plate vibrator having 3 ton compaction force.,, concrete jiont cutting machine for initial and final cuts,., air compressor (1 hour initial + 1 hour final), mason (brick layer )2nd class.,., carpenter 2nd class.,., mason (brick layer) ist class.,., fitter(grade1).,.

corporations/Associations/Others

CTN :40794266

10 Jul, 2025 12.63 Lacs

Kanpur - Uttar Pradesh

Tender For tender for supply of fire alarm cable for single control c c - sitc of active repeater with full function control compatible for already installed gst 200 series detail specification as per annexure a , sitc of network card compatible for already installed gst 200 series panel detail specification as per annexure a , supply & laying of 2 into 1 point 5 sqmm copper fire alarm armoured cable detail specification as per annexure a , supply and fixing of commercial card for programming for already installed gst series detail specification as per annexure a , supply and installation fire alarm software programming for already installed gstseries detail specification as per annexure a , cutting road and making good the same strength as per existing detail specification as per annexure a in cement concrete road , cutting road and making good the same strength as per existing detail specification as per annexure a in bituminous road , construction of masonry chamber 90 into 90 into 100 cm depth detail specification as per annexure a , excavating trenches of required width for pipe and cable detail specification as per annexure a , supply & laying of hdpe pipe 50 mm dia detail specification as per annexure a

CTN :40784013

10 Jul, 2025 25.00 Lacs

Kamrup - Assam

Tender For procurement of building materials and miscellaneous items for special branch headquarters, assam - venial carpet with fitting charge, aluminum bit, altrass (sitkani), augar (handrill), battam sal wood, battam non sal wood, black putty, bitumen washer, brick, bolder, cement, durocem, door ring, drawer lock, door closer spring type, door closer hydrolle type, enamel paint any colour, wall painting, j hook, u hook, l. hook, file (ratty)- 3" inch, g.i. wire black, g.i. wire, g.i. redging-10, g.c.i. sheet, colour coated roofing sheets (roofs), glass putty, grass cutting scissor, glass plank 4mm, glass plank 6mm, glass plank, 8mm, gas cover 4 ", hessian cloth, aluminium handle (door)4", aluminium handle (door)5", steel handle (door)4", steel handle (door)5", hammer 500 grms, hammer 1500 grms, handsaw, indra coat oil, iron brush, lime brush, painting brush 2, 1/2 inch, painting brush 4 inch, roller brush 2 inch, roller brush 3/4inch, tiles cutting machine, tiles cutting blade, 4 inch, iron cutting blade , 4 inch, wood cutting blade(big size) 9 inch, mortage lock 2 liver, mortage lock 6 liver, mortage lock round, monkey plier, mosquite net (plastic), m.s. flate bar, 4 mm concrete drill bit set, drill machine hammer, nails (gojal) 1 inch, nails (gojal) 1.5 inch, nails (gojal) 2 inch, nails (gojal) 2.5 inch, nails (gojal) 3 inch, iron rod (tmt) 6mm, iron rod (tmt) 8mm, iron rod (tmt)10 mm, iron rod (tmt) 12 mm, iron rod (tmt) 16mm, iron rod (tmt) 20 mm, iron rod (tmt) 32 mm, p.v.c. pipe 20 x 4", p.v.c. elbow 4 inch, p.v.c. socket 4 inch, p.v.c. t socket 4 inch, p.v.c. r/socket 4 inch, p.v.c. juntion 4 inch, p.v.c. cowal 4 inch, p.v.c. band 4 inch, galvenized iron sheet (plain sheet) 2.5 ft, galvenized iron sheet (plain sheet) 3 ft, galvenized iron sheet (plain sheet) 4 ft, screw (assorted size) 1 inch, screw (assorted size) 1,1/2 inch, screw (assorted size) 3/4 inch, wood series paper, metal series paper, plank wood gamari, non sal wood plank, shuttaring plank(pine), plastic paint, wooden primer, iron primer, wall primer (water proof), wall primer (without water proof), red-oxide, electronic planner, spirit, pilla mati, mom-wax, sach, thinner, tash wood, tarpin oil, geru mati, ranjan, renda fali, ring for flage post, sand( mota bali), sand( mota bali), sand( mota bali), stone chips 1/2 inch, stone chips 1/2 inch, stone chips 3/4 inch, stone chips 3/4 inch, stone metal, steel bit 2, 1/2 inch, sickle, sun mica 4x8, floor tiles 2x2 ft., floor tiles 2x4 ft., floor tiles 1x1 ft., wall tiles 1 x 1, 1/2 ft, wall tiles 4x2 ft., wall tiles 1x1 ft, screw bit (tin), torza, wall putin (painting ) water proof, wall putin (painting )without water proof, wall series paper 60 ", wall series paper 80 ", wall series paper 120 ", white cement, alumunium net (mosquito metal proof), file carry bag leather 18 inch, file carry bag polyster 18 inch, file carry bag plastic 18 inch, file carry bag woolen 12 inch, file carry bag woolen 18 inch, steel water basins (madium), steel water basins (small), rexine sheets, plastic jharu, g.i. nipples 1/2 inch, g.i. nipples 1 inch, g.i. nipples 2 inch, g.i. nipples 3inch, g.i. nipples 4 inch, g.i. nipples 5 inch, g.i. nipples 6 inch, coconut rope, jute rope (sutli), plastic rope, cistern, english commode, ot pan (indian commode), seat cover, syphone, health format, shower, bathroom mirror (plastic cover 2"x1.5"), bip cock, favicol 250 ml, favicol 500 ml, favicol 1000 ml, dendrite 250 ml, dendrite 500 ml, dendrite 1000 ml, aluminum clams, galoon (small) (plastic), galoon (madium (plastic), galoon (big) (plastic), halpata, keronvice, axe (kuthar), sunpata (karani) 8 inch, sunpata (karani) 2 inch, barbade wire, gaiti, steel buckets, plastic buckets, plastic mug, steel mug, union socket1/2 inch, union socket 1 inch, union socket 1, 1/2 inch, union socket 1,1/4 inch, union socket 2 inch, kadhai (kerahi), terphel metal roof waterproof tape modern leak-proof 3 6", herbicide (glass burner), degchi (aluminium) 50 ltr., degchi (med

Central Government/Public Sector

CTN :40746664

08 Jul, 2025 49.00 Lacs

Jammu - Jammu And Kashmir

Tender For periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifi

Water Booth Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector