Tender For supply of cleaning liquid suitable for crc smart washer as per specification given below- 1)compatibility: crc smart washer parts washing systems. 2) chemical base: water-based, surfactant blend. 3) ph level: neutral (7.0 - 8.0). 4) flammability: non-flammable / flash point: none, 5) voc content: 0 percent (voc-free) 6) specific gravity: 1.02, make/brand: sw-4 of ozzyjuice or saif clean . hsn code: 3402 [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : laboratory chemical crm for pour point , laboratory chemical viscosity standard , laboratory chemical crm for water content , calibration standrad turbidity (1 ntu) , calibration standrad turbidity (10 ntu) , calibration standrad turbidity (100 ntu)
Tender For corrigendum : tender for the supply of water treatment chemicals - cooling water & boiler water treatment chemicals, corrossion inhibitor for cooling water treatment, bio-dispersant for cooling water treatment, mineral dispersant for cooling water treatment, antiscalent for cooling water treatment, antifoulant for cooling water treatment, non oxidising biocide-1 for cooling water treatment, non oxidising biocide-2-45% glutaraldehyde, chemical for clo2 generation, chlorine for clo2 generation, caustic soda for cooling water treatment, anti scalant, corrossion inhibitor & sludge conditioner for boiler water treatment, oxygen scavenger for boiler water treat ment, condensate line protection for boiler water treatment, feed water ph booster (volatile) for boiler water treatment, contingency chemicals for cooling water treatment. this will not be considered for financial evaluation, hydrocarbon ingress into system, chlorination failure, ph fluctuation, lube oil/ grease ingress in to system, high iron content, high turbidity of make up water, high chloride in make up water
Tender For annual rate contract for supply of sanitation materials at, various area of porbandar. - malathion powder 5 percentage isi markmalathion dusting powder 5 percentage isi marked or equivalent approved standard, larvicidal oil (malaria control oil)suitable for anti-larval mosquito control operations in stagnant water bodies, drainsand breeding sites. material shall conform to applicable public health standards andshall be supplied in original sealed containers., fogging machine 6 kgsthermal fogging machine, chemical tank minimum 6 ltr, fuel tank minimum 1.2 ltr, output minimum 40 ltr/hour, complete with accessories.warranty : minimum 12 months, mask3 ply disposable face mask, non-woven fabric, adjustable nose clip, soft elasticear loops, adult size, suitable for sanitation and public health operations., gloves for daily use cotton hand gloves for sanitation workers, heavy duty pvc/rubber gloves for sanitation work, broom (long)technical specificationtype : coconut stick broom (long size)material : good quality dried coconut leaf sticksweight : minimum 500 gramslength : minimum 1200 mmstick length : uniform sizebinding : heavy duty gi wire / nylon cord bindinghandle : without handleconstruction : compact and firmly boundquality : free from rotten, broken, fungus affected or damaged coconut sticksmoisture content : dry and suitable for immediate useapplication : sweeping of roads (also on wet surface), footpaths, public places,open areas and general sanitation workdurability : suitable for regular municipal sanitation operationspacking : as per manufacturer/supplier standard packingacceptance criteriaweight shall not be less than 500 grams.loose binding, broken sticks, rotten material or poor workmanship shall not beaccepted.pmc reserves the right to verify weight and quality at the time of delivery, broom (long)technical specificationtype : coconut stick broom (long size)material : good quality dried indonesian coconut leaf sticksweight : minimum 500 gramslength : minimum 1200 mmstick length : uniform sizebinding : heavy duty gi wire / nylon cord bindinghandle : without handleconstruction : compact and firmly boundquality : free from rotten, broken, fungus affected or damaged indonesiancoconut leaf sticksmoisture content : dry and suitable for immediate useapplication : sweeping of roads (also on wet surface), footpaths, public places,open areas and general sanitation workdurability : suitable for regular municipal sanitation operationspacking : as per manufacturer/supplier standard packingacceptance criteriaweight shall not be less than 500 grams.loose binding, broken sticks, rotten material or poor workmanship shall not be accepted.pmc reserves the right to verify weight and quality at the time of delivery, broom (big)technical specificationtype : coconut stick broom (big size) with handlematerial : good quality dried coconut leaf sticksweight : minimum 300 grams (broom portion only)broom length : minimum 600 mmhandle material : seasoned wooden handle / bamboo handlehandle length : minimum 1200 mm (4 feet)handle fixing : firmly fixed with gi wire / nylon ropebinding : heavy duty gi wire / nylon cord bindinguniform and dense coconut sticksfree from rotten, broken, fungus affected or damaged coconut stickssuitable for main road sweeping, market areas, open grounds and generalsanitation workmunicipal grade qualitydurable and long lasting, safety jacket (universal size) safety green / orange reflective / yellow/ whitewith pmc marking on back side with minimum 6 inch height reflective printing., shovel (pavda) with handletype : heavy duty ms shovel (pavda)blade material : heavy duty msblade thickness : minimum 1.5 mmhandle material : hardwoodhandle length : minimum 900 mmfirmly fixed handlesuitable for garbage handling, silt removal and general sanitation workmunicipal grade quality, trikam with handletype : heavy duty trikam (pickaxe) complete with handlehead material : forged high carbon steel / drop forged steelhead weight : minim
Tender For corrigendum : fixation of local market rate for implementation of different scheme under mgnrega under sainthia development block - lmr, hire charges of concrete mixer with fuel 0.25 to 0.40 cum with hopper, hire charges of diesel road roller with fuel- 8 to 10 tonne, vibrator with fuel (needle type 40 mm), surface vibrator with fuel, water tanker 5000 ltr. capacity, coolie, fitter(grade1), technician, helper (technician), seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, water proofing materials, welding by electric plant, wire mesh (rabbit), diesel oil, c.i. grating 100x100 mm, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, gi pipes 15 mm dia, gi pipes 20 mm dia, gi pipes 25 mm dia, gi pipes 32 mm dia, gi pipes 40mm dia, gi pipes 50 mm dia, gi pipes 65 mm dia, gi pipes 80 mm dia, slotted cowl 75 mm, slotted cowl 110 mm, polyethylene water storage tank with cover and suitable locking arrangemnet, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm inner 100 mm dia, shower rose c.p.brass for 15 to 20 mm inner 150 mm dia, vitreous china squatting plate, ball valve 15 mm dia, ball valve 20 mm dia, ball valve 25 mm dia, brass full way valve with c.i. wheel (screwed end) 20 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rest 275mmx125mmx25mm, carriage of steam coal, carriage of stone aggregate below 40 mm nominal size, carriage of steel, carriage of stone aggregate 40 mm nominal size and above, carriage of tar bitumen, carriage of soling stone & masonry stone, carriage of carriage of moorum, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, carriage of cost of neelgiri/maxican grass truf sqm, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type) p trap, circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2
Tender For fixation of local market rate for implementation of different scheme under mgnrega under rajnagar development block - lmr, hire charges of concrete mixer with fuel 0.25 to 0.40 cum with hopper, hire charges of diesel road roller with fuel- 8 to 10 tonne, vibrator with fuel (needle type 40 mm), surface vibrator with fuel, water tanker 5000 ltr. capacity, coolie, fitter(grade1), technician, helper (technician), seam bolts and nuts 6 mm dia and 25 mm long, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, coal tar, portland cement, white cement, coal (steam), brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, glue, unslaked lime, synthetic enamel paint, having voc ( volatile organic compound content less than 150 gm/liitre, ready mixed pink or grey primer on wood work(hard and softwood) having voc content less than 50 gms/litre, water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre, moorum, black japan, synthetic enamel paint in black or chocolate shade, superior copal varnish, green or blue medium shade pigment, rolling shutter made of 80x1.25 mm machine rolled laths, galvanised steel plain sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, g.i. plain washer for seam bolts, water proofing materials, welding by electric plant, wire mesh (rabbit), diesel oil, c.i. grating 100x100 mm, mirror of superior make glass 60x45 cm, vitreous china pedestal for wash basin, gi pipes 15 mm dia, gi pipes 20 mm dia, gi pipes 25 mm dia, gi pipes 32 mm dia, gi pipes 40mm dia, gi pipes 50 mm dia, gi pipes 65 mm dia, gi pipes 80 mm dia, slotted cowl 75 mm, slotted cowl 110 mm, polyethylene water storage tank with cover and suitable locking arrangemnet, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, white plastic seat (solid) with lid c.p. brass hinges and rubber buffers, shower rose c.p brass for 15 to 20 mm inner 100 mm dia, shower rose c.p.brass for 15 to 20 mm inner 150 mm dia, vitreous china squatting plate, ball valve 15 mm dia, ball valve 20 mm dia, ball valve 25 mm dia, brass full way valve with c.i. wheel (screwed end) 20 mm dia, vitreous china flat back wash basin 630x450 mm, vitreous china angle back wash basin 400x400 mm, vitreous china foot rest 275mmx125mmx25mm, carriage of steam coal, carriage of stone aggregate below 40 mm nominal size, carriage of steel, carriage of stone aggregate 40 mm nominal size and above, carriage of tar bitumen, carriage of soling stone & masonry stone, carriage of carriage of moorum, float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm), float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 kg/ sqm), float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm), anodised aluminium hanging type door stopper, carriage of cost of neelgiri/maxican grass truf sqm, galvanised steel corrugated sheets, vitreous china flat back wash basin 550x400 mm, stainless steel bolts /square bar and plates, mild steel tubes hot finished seamless type, red oxide zinc chromate primer, vitreous china flat back wash basin 450x300 mm, hydraulic door closer tubular type aluminium section body, oxidised m.s. casement stay (straight peg type) 300 mm not less than 0.33 kg, coloured orissa pattern w.c. pan 580x440 mm, coloured pedestal type w.c. pan 580x440 mm (european type) p trap, circular shape 450 mm dia precast r.c.c. manhole cover with frame l.d. -25, upvc pipes (working pressure 4 kg /cm2 ) single socke
Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu