Latest water distribution pipe Tenders | Government water distribution pipe Tenders

Central Government/Public Sector

CTN :40810174

08 Jul, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of gasket for 32 mm n.b. pipe for flange welded joint (pipe to equipment). drawing no.:- wd-83062-s-07 , alt (6) item - 1 specification: - 04-abr-2019, (rev.-2). [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40835912

14 Jul, 2025 2.10 Lacs

Haveri - Karnataka

Tender For dma/hvr/2025-26/water supply materials annual maitainance/ts - electrofusion reducer 90 by 75 mm, pvcbend140mm dia, pvcbend75mm dia, pvcelbows180mm dia, pvcelbows160mm dia, pvcelbows140mm dia, pvcelbows110mm dia, pvcelbows90mm dia, pvcelbows75mm dia, pvcelbows63mm dia, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is1865 with the latest amendments and of grade ggg 40or50, provision for corresponding dia ms flanges should be made in the estimate.etc. comple for sluice valve of pn 10and 200mm, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is-1865 with the latest amendments sr rates of valves and provision for corresponding dia ms flanges should be made in the estimate. etc. completfor sluice valve of pn10.0 and 150mm , providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile iron di conforming ti is-1865 with the latest amendments and of grade ggg 40 50, shaft of stainless steel, wedge fully rubber lined with edpm seals of nbr and the valves should be vacum tight and 100complete specification as per item no2.23.2, providing and fixing di resilient seated soft sealing sluice valve of variouis dia. with body bonnet of ductile irondi conforming ti is 1865 with the latest amendments and of grade ggg 40or50, complete specification as per item no 2.23.1, supply, installing,testing and commissioning common control panel consisting of the following incoming no set of phase indicating lamps with sfu of suitable rating no, analog ammeter, no analog voltmeter 1ni with phase selector switch, complete specification as per item no 13.24.1, supply, installing,testing and commissioning common control panel consisting of the following incoming set of phase indicating lamps with sfu of suitable rating , analog ammeter, analog voltmeter 1ni with phase selector switch, complete specification as per item no 13.23, supply of isi mark 175mm nominal bore,plain and steel casing pipe grade of steel fe 410 of wall thickness conforming to is 4270 2001 and latest ammendments, complete specification as per item no 12.32, pvccouplers 200mm dia, pvccouplers 140mm dia, pvccouplers 110mm dia, pvccouplers 75mm dia, pvccouplers 63mm dia, handglovess, pvcreducer 110 mm dia, pvcreducer 90 mm dia, pvcreducer 75 mm dia, pvcreducer 63 mm dia, pvcreducer 50 mm dia, pvcservice saddles 90 mm dia, pvcservice saddles 75 mm dia, pvcservice saddles 63 mm dia, pvcbend 160 mm dia , pvcbend 110 mm dia , pvcbend 90 mm dia , pvcbend 50 mm dia , pvctee 160 mm dia , pvctee 110 mm dia, pvctee 90 mm dia, pvctee 75 mm dia, pvctee 63 mm dia, pvctee 50 mm dia, pvctee 40 mm dia, pvctee 25 mm dia, pvcelbows 200 mm dia, pvcelbows 50 mm dia, pvcelbows 40 mm dia, pvcelbows 32 mm dia, pvcelbows 25 mm dia, pvc flebyible hose pipe 1inch, upvc column pipe 1inch, hdpe pipe grade pe100-pn 10, 63mm , medium duty gi pipe of 25mm dia , medium duty gi pipe of 20mm dia , opvc reducer 200x160 , opvc reducer 160x110 , opvc reducer 110x90 , opvc sliding coupler 200mm pn16 , opvc sliding coupler 160mm pn16 , opvc sliding coupler 110mm pn16 , pvc pipes of 6 kg/cm2 for 90mm(1.313) , opvc sliding coupler 60mm pn16, supply and delivery at site 50mm(2inch) dia heavy duty unplasticized pvc column pipes with heavy duty collars,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proof epdm ring with isi mark with its latest amendments, supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (c class) as per is 1239 (part-i) 1990 with latest amendments with isi mark (one end fitted with heavy duty collar and other end fitted with protective cover)50 mm , supply and laying of lg ut cable having aluminium conductor pvc insulated, sheathed, galvanized steel wire / steel tap armored cable with pvc over sheathing., pvc pipes of 6 kg

Central Government/Public Sector

CTN :40837546

02 Jul, 2025 NA

Latehar - Jharkhand

Tender For supply of flexible hose pipe for bogie and brake cylinder 1/2x600 mm. spec:as per c.rly . drg. no. mtn/tqka/3, revision-r4, ref.-b, item 1 to 7 in assembled condition. mtn/yqka/3, rev-r5,ref-b, item 1 to 7 spec: c. rly drg. no. mtn/yqka/3, rev-r5, ref-b, item 1to 7. [ warranty p eriod: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :40836281

09 Jul, 2025 NA

Sonitpur - Assam

Tender For supply of flange male connector (pipe to eqpt) 20 mm n.b (70 mm pitch) to drg no icf/std-3- 5-020 , item-1, alt c, as per icfspecification no. icf/md/spec-166. [ warranty period: 30 months aft er the date of delivery ]

Central Government/Public Sector

CTN :40825973

04 Jul, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of set of pipe and pipe fitting items (refer techno commercial sheet for item description)

Central Government And Public Sector

CTN :40836894

01 Jul, 2025 NA

Bengaluru - Karnataka

Tender For supply of stopper pipe for wheel drg.no.: wap/sk/m-153 as per rwf drg no: c/mo-16/32 alt 'o' & packing as per drawing no: wap/sk/m=592. note: invitation of tender and procu rement are from manufacturers having manufacturing facilities/plant in india only. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitt ed: max 8 lacs ]

CTN :40836377

03 Jul, 2025 NA

Kharagpur - West Bengal

Tender For supply of union for air pipe connection of reversor,ctf,line contactor & shunting contactor of complet e ba panel as per drg. no. se/kgp/el-209,item-1. [ warranty period: 30 months after the date of delivery ]

CTN :40580624

02 Jul, 2025 NA

Khorda - Odisha

Tender For corrigendum : supply of electrical item - smps 24 v 20a , bulb 100 w , panel cooling fan 110 v 3 inch , panel cooling fan 230 v 3 inch , panel cooling fan 110 v 4 inch , panel cooling fan 230 v 4 inch , hw battery 9 v , angel holder 6 amp , pendant holder 6 amp , halogen light 12 v ac,20 w , flexible pipe 1 inch , casing caping 1 inch , casing caping 0.5 inch , havells copper cable 2.5 sq mm 4 core , contactor 230 v 25 a , contactor 230 v 30 a , contactor 230 v 50 a , contactor 230 v 10 a , auxiliary no contact , auxiliary nc contact , 3 modular box with cover , cable tie 100 mm , cable tie 150 mm , cable tie 200 mm , cable tie 250 mm , cable tie 350 mm , push button switch red no-nc 12 mm , push button switch yellow no-nc 12 mm , push button switch green no-nc 12 mm , led tube light 20w, 2 inch , plastic wall grip 38 mm , plastic wall grip 50 mm , rotary switch 10 amp 4 pole 2 way switch 35 mm , dryer unit filter 5 micron , filter auto dranage valve 230 volt

CTN :40821470

30 Jun, 2025 4.95 Lacs

Hanumangarh - Rajasthan

Tender For supply of bal vatika equipments with installation total 5 works rawatsar - excavation by labour including loading, unloading, disposal soil within initial lead 50 meters and lift up to 1.50 meters in dry or moist including dressing of exacavted area. back filling and dewatering wherever required complete all respect, (hard soil). (bsr item no. 2 b). in hard soil, 1:2:4 , , , , , 1:3 (item no 13a), four seater mgr:- providing and fixing of four seater mgr swing of size 4/5 feet (diameter), 3 feet (height) fabricated with a center pipe/ frame of 50 nb shall be made from c class g.i. pipe and frp material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 50 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (the cement concrete and excavation work shall be paid separately). (non bsr item no. 01, dwdsc/2021-22/6329-443/04.03.2022)., circular swing four seater:- providing and fixing of circular swing four seater of size 6.0 x 5.25 x 5.0 feet fabricated with a center pipe/ frame of 65 nbshall be made from c class g.i. pipe and frp material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 65 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or berger paints with 60 to 70 micron thickness, all complete as per drawing, design, directions and approval of engineer-in-charge regarding material, shape of equipment, colour (of metal, seat and pedal), and fixing of equipment etc. (the cement concrete and excavation work shall be paid separately). (non bsr item no. 02, dwdsc/2021-22/6329-443/04.03.2022)., four seater see saw:-providing and fixing of four seater see saw of size 5.5 x 6.25 x 2.5 feet fabricated with a center pipe/ frame of 50 nb shall be made from c class g.i. material. the bottom shall be welded with support of m.s. round plate of 250 mm & 10mm thickness. the bottom frame of 32nb shall be made from c class g.i. pipe. the handle frame of 25nb shall be made from c class g.i. pipe. the foundation should be used for fixing is a structure and shall be made from center pipe of g.i. of 50 nb c class welded with m.s. round plate of 250 mm & 10mm thick. main pipe shall be supported with 25 mm x 25mm m.s. angles of 3 mm thickness and 20mm x 40mm crc square pipes of 3mm thickness. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble or be

CTN :40823055

30 Jun, 2025 30.29 Lacs

Ahmedabad - Gujarat

Tender For construction of washrooms for security personnel and requirement of rcc overhead water tank and replacement of entire underground water distribution pipes at delhi earth station des, new delhi - civil, ph and electrical works.

Water Distribution Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector