Latest water drilling machine Tenders | Government water drilling machine Tenders

State Government

CTN :41355800

12 Aug, 2025 NA

Delhi - Delhi

Tender For repairing of delivery line of pumpset no.7 and 8 along with allied work at 2nd 40 mgd cwph plant at wazirabad water works. (re-invite) - hydraulic excavator (3d) with driver and fuel.dsr no. 0020, hire and running charges of crane 20 tonne capacity.dsr no. 0028, pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like.dsr no.14.23, providing and constructing bund with filled up earth in empty (pvc) cement bags (excluding the cost of earth which will be available at site of work) i/c stitching and stacking and placing in position etc. complete and i/c cost of empty plastic bags and removal of the same after completion of the work. providing and stacking of earth filled gunny bags to make the bund to give the dry condition of work. dsr no.26.1.19, taking out ms pipes of 600mm dia. from the trenches after de-jointing and stacking the same along the trenches within a lead of 50 meters. approved rates., providing ms pipe fabricated/manufactured out of ms plate of steel grade fe410 as per is 3589:2001 or out of hr coils of same/equivalent grade;coated internally with food grade epoxy and externally/outside with epoxy coating;complete in all respect as per relevant is codes with upto date amendments and as directed by engineer-in-charge.600mm nominal dia. (clear internal dia.) pipes of 8mm thickness (min.).approved rates.make skf / fag, laying in position m.s. pipes/steel cylinder reinforced concrete pipes suitable for rubber ring jointing or welding or flanged jointing (excluding cost of pipe). approved rates., 50 % neoprene (1.5 mm to 25 mm).sor no.22.6.1, cast iron non rising sluice valve of size 600mm, pn 1.0 for clear water application, flanged end as per is : 14846 body,dome,wedge- ci is:210, gr.fg260 body & wedge rings bronze is:318 gr. ltb2, spindle-ss is:6603, gr.12cr12, gland packing- greasy jute, packing fasteners- cs, is:1367, cl-4.6/4.0, gasket natural rubber, flange drilling - is:1538, table 4 & 6.make :- kbl /ivc/djb approved. sor.4.12.13, providing of ms flange(1set) suitable for the above sluice valve along with suitable size nut-bolts for making flange joints complete as per site requirement., installation of sluice valves with the help of all labour like fitter, welder, cutter, helper, beldar, chowkidar, supervisor, electrician and material used like welding machine, cutter set i/c oxygen cylinder, welding road t&p along with its all transportation loading, unloading complete at site of work., testing and commissioning of sluice valve on full pressure as per satisfaction of engineer-in-charge.

corporations/Associations/Others

CTN :41312170

08 Aug, 2025 1.83 Lacs

Kolkata - West Bengal

Tender For replacement of damaged valve accessories by newly supplied items for 18 inch dia delivery valve of pump unit no. 5 at mullick ghat pumping station - dismantling of electrical power connection and control connection for the actuator of valve with proper marking and tapeing the connection ends with proper insulation. also, dismantling the actuator from the valve spindle before taking up the work, de - watering of manifold water to avoid any leakage of water during opening of upper hubs s.v gate, arrangement for loosing nut & bolt of the upper hub of s.v & dismentling the same, dismantling, lifting of upper hub of the s.v from the valve top by chain pully arrangement, lifting, dismantling s.v gate with arrangement of flange fixing to stop leakage of water, cleaning of upper hub of sv including sv gate slot., supply & delivery of one gm spindle matching with the existing box nut made of gm for 18 inch dia sluice gate valve of 0.625mgh pump. the spindle to be manufactured by proper machining turning thread cutting, polishing etc., supply & delivery of one gm box nut matching with the existing spindle for 18 inch dia sluice gate valve of 0.625mgh pump. the box nut to be manufactured by proper machining turning thread cutting, polishing etc., manufacturing, supply & delivery of one c.i. gate fitted with g.m. rings (having cu-85%, zn-4 to 6%, pb-4 to 6%, sn-4 to 6%) with set screw etc. (as per sample supplied departmentally) but without spindle & nut for 18" dia. sluice valve, to & fro transportation of c.i. gate and allied accessories from pump house work site to contractors workshop and vice versa including loading and unloading with proper care as per direction of e.i.c. (upto 10 k.m.), fitting fixing of s.v gate with spindle, fitting fixing of upper hub of s.v after necessary cleaning, new nut & bolts washer 4"x1"dia, reconnection (same and reverse as dismantling) electrical power & control connection for the actuator of valve & also refitted the actuator on the valve spindle, supplying, fitting & fixing of cast iron pedestal stool of suitable size, conforming of i.s. 210 of latest revision and as per approved drawing & direction of engineer in charge. the cost includes cost of materials, man power employed for dismantling and fitting fixing, civil works consumables like cutting tools, anchor bolt of required size, hire charges of machineries like lathe/ shaping machine, grinding machine, drilling machine, tools & tackles etc. including carriage loading & unloading.

CTN :39038234

22 Aug, 2025 13.98 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itotin operator advanced machine tools (oamt) tradeat iti suart, gujarat, india (package 4: oamt trade) - surface grinding machine , cnc machining centre , cnc milling tools for above machine , cnc turn centre , edm , cnc simulator , vertical-spindle five-axis machining centres , cnc tool pre setter , ss and sc centre lathe (all geared) with having minimum specification , universal milling machine with minimum specification , horizontal milling machine with minimum specification , vertical milling machine , universal tool and cutter grinding machine , cnc lathe machine , tool holders to suit the cnc turn centre , jig boring , gear hubber , gear shaper machine , power saw machine-hydraulic feed system , cylindrical grinder , power saw machine , pedestal grinder double end type. , radial drill motorized with tapping attachment , drilling machine pillar type with drill chuck & key. , slotter , double column planer , shaping machine , shaping machine , co-ordinate measuring machine , cnc wire cut edm (electrical discharge machining) , special tools and equipment , involutes gear module , surface plate , marking table , scribing block universal , v-block , combination set , spanner double ended metric , adjustable spanner , reduction sleeve morse taper , angle plate adjustable , oil stone , number drill h.s.s(parallel shank) , drill (parallel shank) , twist drills , drill chuck , centre drill , grinding wheel dresser(diamond) , grinding wheel dresser hunting type , c- clamp , c-clamp , tap & die set inbox metric pitch , reamer , reamer adjustable , machine vice , machine vice , machine vice , universal machine vice , universal table angle plate , taper shank twist drill set , shaper tool holder turret type , knurling tools (set of 3) straight and diamond , carbide tipped tools of different sizes and shapes (through away tips) , micrometer outside , micrometer outside , micrometer outside , digital micrometer outside , digital micrometer outside , digital micrometer outside , digital vernier calliper , micrometer depth gauge , dial vernier calliper , vernier height gauge , vernier bevel protractor with blade , bevel gauge , telescopic gauge , sine bar , inside micrometer , inside micrometer , dial test indicator , slip gauge set (normal set) metric , plug gauges , ring gauges , snap gauge , vernier caliper , cylindrical cutter , cylindrical cutter , side and face cutter , side and face cutter , side and face cutter , side and face cutter , equal angle cutter , equal angle cutter , equal angle cutter , t" slot , t" slot cutter , t" slot cutter , t" slot cutter , single angle cutter , single angle cutter , single angle cutter , single angle cutter , double unequal angular cutter , double unequal angular cutter , end mill cutter , concave cutter , convex cutter , corner rounding cutter , corner rounding cutter , slotting cutter , slotting cutter , slitting saw cutter , slitting saw cutter , slitting saw cutter , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , dove tail milling cutter parallel shank , shell & end mill cutter , shell &end mill cutter , face mill cutter with inserted tip , face mill cutter with inserted tip , face mill cutter with inserted tip , involutes gear module , air conditioner split , dg set , air conditioner , wall charts, transparencies and dvds , air conditioner , steel rule , divider , centre punch , hammer ball pane , combination plier , file flat bastard , file flat 2nd cut , engineers screwdriver , file flat smooth , cold chisel flat , try square , straight edge steel , steel tape , soft hammer , sprit level , hammer ball pein , screwdriver, heavy duty , hammer lead , screwdriver , allen hexagonal keys , angle plate , solid parallel sine pair (different size) in metric , oil can pressure feed , file flat 2nd cut , file flat smooth , fi

CTN :41295842

22 Aug, 2025 NA

Jamalpur - Bihar

Tender For supply of portable magnetic core drilling machine as per the following specification. 1) materi al work pieces: i. carbon steel & low alloy steel sheets. ii. stainless steel sheets. iii. mild steel angles. 2)cor e drilling capacity: 12- 35 mm. 3) twist drill capacity : 1-12 mm 4) cutting depth: 50 mm 5) motor power: 1 500 w +/- 10 %. 6) magnetic force: 14000 n. (minimum) 7) no load speed: 750 rpm 8) spindle: 19.05 mm weldon 9) maximum weight: 11 kg. 10) warranty- minimum 12 months against manufacturing defects. 11) operating manual and maintenance manual shall be submitted along with machine. make: ojasvi/eibenst ock/schiffler/kpt in its equivalent. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41224231

08 Aug, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of portable magnetic core drilling machine as per the following specification. 1) material work pieces: i) carbon steel & low alloy steel sheets. ii) st ainless steel sheets. iii) mild steel angles 2) core drilling capacity: 12-35mm 3) twist drill capacity: 1-12mm 4) cutting depth: 50mm 5) motor power: 1500w + /-10% 6) magnetic force: 14000n (minimum) 7) no load speed: 750rpm 8) spindle: 19.05mm weldon 9) maximum weight: 11kg 10) warranty: minimum 12 mo nths against manufacturing defects 11) operating manual and maintenance manual shall be submitted along with machine. make: ojasvi/eibenstock/schif fler/kpt/bosch. [ warranty period: 12 months after the date of delivery ]

State Government

CTN :41125661

08 Aug, 2025 NA

Chandigarh - Chandigarh

Tender For supply of machinery and equipment of fitter trade - schedule 1, ss and sc centre lathe (all geared) with minimum specification, schedule 2, pillar type drilling machine, drilling machine bench, d.e. pedestal grinding machine with wheels rough and smooth, grinding machine, motorised bench grinder, schedule 3, transformer welding set - continuous welding current, with all accessories and electrode holder 60% duty cycle with standard accessories, welder cable, lugs for cable, earth clamps., arc welding table (all metal top) with positioner., oxy - acetylene gas welding set equipment with hoses, oxygen & acetylene cylenders, regulator and other accessories, gas welding table with positioner with fire bricks, welding torch tips of different sizes for oxy - acetylene gas welding, gas lighter., trolley for gas cylinders., chipping hammer., gloves (leather), leather apron., spindle key for cylinder valve., welding torches., welding goggles, welding helmet with coloured flame retardent glass, tip cleaner, schedule 4, compressor unit, pneumatic trainer kit, each consisting of the following matching components and accessories:, pneumatic workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide:, carrier for mounting components, such as pb & relay boxes., cut section model for pneumatic components, hydraulic trainer kit, each consisting of the following matching components and accessories:, hydraulic workstation with 40 square mm aluminium profile legs, wooden work surface, and one pedestal drawer unit having 5 drawers, each with handles and individual locks, on metallic full panel drawer slide:, cut-section models for hydraulic components

Water Drilling Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

State Government