Web Analytics Made Easy - StatCounter

Water Jet Monitor Tenders

Get complete information related to latest Water Jet Monitor Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Water Jet Monitor Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Water Jet Monitor Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

Central Government/Public Sector

CTN :45343075 Due date: 05 Jun, 202605 Jun, 2026 NA
Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. cr 93919 vpu 2. cr 93834 vpu 3. special repair 93832 vpu 4. cr 93915 vpu r/items: 1. wheel set with axel, axel box cover of all coaches=16 sets & complete 08 trolley with fittings. 2. dv of all coaches = 04 nos and bmbc of all coaches = 16 nos. 3. draw bar hook with screw coupling complete assembly = 08 nos. 4. buffer plunger = 16 nos, and buffer casing=16 nos of all coaches. 5. lot will be sold on number basis. remark: - 1. coaches are lying at roh sick line no.03 at cla cutting yard. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track and premises to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguisher etc. at the cutting yard. location: roh sick line no.03 at cla cutting yard. stock holder:-sse/roh/c&w ltt.

Central Government/Public Sector

CTN :45343076 Due date: 05 Jun, 202605 Jun, 2026 NA
Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. cr 041122 wgaccw 2. cr 041263 wgaccn 3. cr 041317 wgaccn r/items: 1. wheel set with axel, axel box cover of all coaches = 12sets & complete 06 trolley with fittings. 2.dv of all coaches = 03 nos and bmbc of all coaches = 12 nos. 3. draw bar hook with screw coupling complete assembly = 06 nos. 4. buffer plunger = 12 nos, and buffer casing = 12 nos of all coaches. 5. alternator = 06 nos, motor pump = 05 nos and rru=03 nos. 6. lot will be sold on number basis. remark: - 1. coaches are lying at line no. ktc 04 at cla cutting yard. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track and premises to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguisher etc. at the cutting yard.. location: line no. ktc 04 at cla cutting yard. stock holder:-sse/roh/c&w ltt.

Central Government/Public Sector

CTN :45331667 Due date: 10 Jun, 202610 Jun, 2026 NA
Tender For providing of testing service for on-board /commissioned equipment/ instrument related to plant - testing induction rate/ratio of foam proportioning system of acfts; testing induction rate/ratio of foam proportioning system of acfts; nabl labs

CTN :45332853 Due date: 05 Jun, 202605 Jun, 2026 15.22 Lacs
Tender For supply of establishment of chreche facility at ins kattabomman - child safe soft flooring mats made of nontoxic material , baby cots with mattress and associated bedding items , child sized tables and chairs made of nontoxic materials with rounded edges. , child friendly storage units and shelves , educational toys, puzzles, building blocks, sensory toys and activity kits , soft play equipment such as foam blocks, climbing structures, tunnels and slides , small library with illustrated storybooks and educational materials , audio video display unit of 55 inches and above with internet connectivity , changing station with storage for diapers, wipes and sanitizing supplies , temperature regulated cabinet for milk, baby food, snacks,bottle sterilizer , child safe electrical fittings , covered electrical outlets , setting of adequate ventilation and lighting within facility , display emergency contacts and safety instructions within the facility , basic first aid kit with essential medial supplies and fire extinguishers

CTN :45342292 Due date: 29 Jun, 202629 Jun, 2026 28.75 Lacs
Tender For supply, testing and commissioning of 01 nos. mini fire brigade water cum foam tender including fabrication erection and installation work of all equipment complete as per nit and rmsi guideline under municipal council shahdol

CTN :45322644 Due date: 01 Jun, 202601 Jun, 2026 8.70 Lacs
Tender For supply, installation, testing and commissioning of phase wire and street light and vairious electrical equipment needed for implementation of budget announcement 2025-26 - providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in, led street light fixture with minimum lumen output 5600 lm, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . clearance between main bus bar and risers / metal parts shall be at least 10 mm additional to width of bus bar bus bar is insulated by heat shrinkable sleeves . earth and neutral bus bar shall be half of the size of phase bus bar. ( cost of bus bar / flexible wire for interconnection between main busbar and switchgear is to be paid extra )(d)wiring between components within switchgear and incoming / outgoing cable shall be done through the terminal block only. direct connection shall not be permitted. each terminal block shall be one piece moulded, barrier type, 650 volt grade, complete with washers, heads, studs with two nuts and identification strips and shall have adequate continuous current rating. for tap-offs, adjacent terminals with shorting strips shall be used. 10% spare terminal blocks shall be provided. wire identification on marking strip shall correspond to the designation of the wiring diagrams. all wire terminals on the equipment shall also be marked with designation corresponding to those of the wiring diagram.(e)all wiring shall be enclosed in plastic channels and neatly bunched and closed in metering chamber, wiring between terminals of various devices shall be point to point (no wire splitting or tee connections) with wires neatly trucked along the back of the panels, adequately supported to prevent sagging.(f)floor mounted panel sh

CTN :45304418 Due date: 11 Jun, 202611 Jun, 2026 2.96 Crore
Tender For tender for supply of medical equipment required for setting up ultra burn care centre. - electro surgical unit/diathermy , skin graft mesher, , suction machine (heavy duty), , ot table (general surgery hydraulic (electric), , defibrillator biphasic, , steam sterilizer/autoclave, , burn treatment bathtub, , volumetric infusion pump, , syringe pump, , 15 (3 per bed), , electric dermatome, , multipara monitor, , icu ventilator advanced, , blood gas analyzer (abg), , video laryngoscope, , air mattress anti bedsore, , fully automatic icu beds, , over bed table, , ecg machine 12 channel, , flexible fiberoptie bronchoscope, , resuscitator hand operated adult, , resucitator hand operated pediatric, , crash cart, , instrument trolley, , automated vertical autoclave, , portable xray machine, , anesthesia workstation, , skin graft handle, , combo3 plus (tens+ift+ems+russina), , pulsed electromagnetic field (pemf) therapy, , ultrasonund therapy (1 & 3 mhz), , class iv therapeutic laser, , shockwave therapy (eswt), , air compression units for physiotherapy, ultrasonund therapy (1 & 3 mhz), , class iv therapeutic laser, , shockwave therapy (eswt), , air compression units for physiotherapy, , emg (electromyography biofeedback device), , height adjustable treatment table, , continuous passive motion (cpm), , motorized cpm-shoulder/elbow, , intelligent active-passive trainer (upper limb and lowe limb combined), , common sensorized rehabilitation gloves, , computerised pulley system, , digital gait analyzers, , quadriceps exercise chair, , tilt table (motorized), , shoulder wheel with magnetic resistance, , standard auxiliary crutch, , walkers, , elbow crutch, , wheel chair (detachable armrest & footrest), , hand gym kit, , exercise resistance bands/tubes, , balance board/wobble board, , theraputty & gel balls, , occupational therapy workstation, , foam bolsters & wedges (2 set), , kremer wire splint each set of 50, , contrast bath, , butterfly shape hydrotherapy tank, , hydrocollator (hot pack unit), , cold therapy (chilling unit)

State Government

CTN :43368597 Due date: 27 May, 202627 May, 2026 70.00 Lacs
Tender For bid to ras supply of establishment of fabrication laboratory fablab at nfsc d d - digital fabrication , electronic equipment , power tools , hand tools , measuring equipment , safety equipment , electronics equipment 2 , consmables mechanical , acrylic sheet , foam sheet , ply boards , adhesives , pcb drill bits , drill bits , electronics consumables , storage , infrasturcture

CTN :45169334 Due date: 01 Jun, 202601 Jun, 2026 NA
Tender For local purchase of hospital equipment , electrical equipment and office furniture at district and development block level year 2026-2027 - visitor chair medium back executive with armrest, visitor chair high back executive with armrest, visitor chair, revolving chair high superior quality, dr. revolving chair with mesh cloth, revolving chair high back excutive, office chair, computer table wooden 5x3 fit, computer table wooden 4x2.5 fit, three seater waiting chair iron, almirah iron superior quality 6x3 fit, rack iron three side cover 78x36x18 inch, almirah wooden, file shelves 3x5 fit, computer table wooden 3x2 fit, three seater waiting chair iron with foam, plastic chair, visitor chair medium back excutive with armrest godrej interio,impression furniture,methodex,duriyan, visitor chair high back excutive with armrest godrej interio,impression furniture,methodex,duriyan, revolving chair high superior quality godrej interio,impression furniture,methodex,duriyan, computer table wooden 5x3 fit godrej interio,impression furniture,methodex,duriyan, computer table wooden 4x2.5 fit godrej interio,impression furniture,methodex,duriyan, computer table wooden 3x2 fit godrej interio,impression furniture,methodex,duriyan, almirah iron superior quality 6x3 fit godrej interio,impression furniture,methodex,duriyan, staff locker iron, hospital furniture name hospital bed with matress sup. quality, hospital bed with matress fowler, hospital bed with matress, emergency crush coat ss. sup. grade, medicine trolly ss sup. quality, streture superior quality, wheel chair foldable high quality, bed side locker, i.v. stand s.s. superior grade, foot step, examination table with matress and foot step, bed side stool, vertical autoclave, emergency drug trolly/crash cart, spotlight, fogging machine, head lamp, x-ray view box, stop watch, staff locker, urine pot male, urine pot female, bed side locker, instrument tray, radient warmer, delivery set, labour bed, normal delivery kit, office equipment a.c. 1.5 tan branderd company, a.c.2 tan branderd company, digital clock, refrigerator 150 to 200 lit, water cooler with ro, refrigerator 200 to 250 lit, room heater, room blower, fire extinguisher 8 kg, fire extinguisher 7 kg, fire extinguisher 4 kg, fire extinguisher 5 kg, torch led white light, battery (exide), battery (luminous), inverter set single battery with stand, inverter set double battery with stand, battery aa, battery aaa, cfl bulb 10w, cfl bulb 18w, cfl bulb 42w, led 10w, led 20w, led 40w, led tube light 50w, led tube light 20w, seeling fan, wall fan, cooler symphony 70l, cooler symphony 110l

Central Government/Public Sector

CTN :45246568 Due date: 26 May, 202626 May, 2026 NA
Tender For auction sale of rolling stock - cond. icf coaches with iron, steel, wooden scrap and other non-ferrous. 1. cr 90937 art 2. cr 011893 vph 3. special repair 016843 vph 4. cr 014035 vph 5. cr 011885 vph r/items: 1. wheel set with axel, axel box cover of all coaches=20sets& complete 10trolley with fittings. 2.dv of all coaches=05 nos and bmbc of all coaches=20 nos. 3. draw bar hook with screw coupling complete assembly=10 nos. 4. buffer plunger=20 nos, and buffer casing=20 nos of all coaches. remark: - 1. coaches are lying at kurla cutting yard line ktc-4 and ktc-6. 2. cutting allowed for easy loading. 3. purchasers are to see the coaches personally before bidding. no claim will be entertained after sale of lot. 4. r/items are to be handed over to sse/roh/c&w/ltt by the purchaser as per para 2.9 & 2.10 of jpo no. and letter no. m.688.s.43.c dt 18.08.2025. these shall be handed over at nominated place in roh depot. 5. railway track to be cleared by the purchaser before compilation of delivery i.e. mud, muck, rexine, pvc sheet, wood, ply, plastic, foam, glass, rubber etc. 6. purchaser has to ensure the safety of railway assets, his labour and other staff at site. 7. purchaser will be fully responsible for any damage to railway property. 8. precaution should be taken while dismantling/cutting and loading of cut parts. 9. purchaser has to keep fire safety equipment/items i.e water, sand, fire extinguiser etc. at the cutting yard. 10. lot will be sold on number basis. location: cla cutting yard line no ktc-4 and ktc-6. stock holder:-sse/roh/c&w ltt.
 Loading, Please wait...

Connect us via What's Up