Latest water level gauge Tenders | Government water level gauge Tenders

State Government

CTN :45702947

30 Jun, 2026 NA

Rohtak - Haryana

Tender For fixing of c.i. valves hydrants providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 1. 80 mm i/d , installation of shallow/medium/deep tubewells as per is 2800:1991 development of tube well according to clause 9.3 of is: 2800-1991 (part-i) as amended up to date and specifications attached and as directed by the engineer-in-charge of the work including the cost of all consumable stores, fuel, oil, compressors, pumps and machinery etc. as required for the work. 1. compressor 450cfm x 250 psi , installation of shallow/medium/deep tubewells as per is 2800:1991 electric logging of tube well. , installation of shallow/medium/deep tubewells as per is 2800:1991 supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 2. 15 hp motor

State Government

CTN :45705892

30 Jun, 2026 NA

Pinjore - Haryana

Tender For providing gi pipes class b marked with is: 1239 in 3.05 m length, their threading and welding with flanges (heavy duty) on both sides, jointing with nuts and bolts ( w make), rubber gaskets , lowering into tube wells and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of engineer-in- charge. 3. 80 mm i/d , installation of shallow/medium/deep tubewells as per is 2800:1991 supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 5. 30 hp motor ,. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 10 sqmm

Central Government And Public Sector

CTN :45709559

15 Jul, 2026 NA

Multi City - Multi State

Tender For air receiver tank of capacity 4 meter cube (4000 liters) as per following technical specifications.size of the shell: -diameter =1260 mm. height of the shell=3150 mm. 1. service: compressed air 2. capacity: 4000 liters 3. orientation: vertical 4. working pressure: 7.0 kg / cm2g 5. operating pressure: 6.0 kg / cm2g 6. hydro test pressure: 10.5kg/ cm2g 7. working temperature: ambient 8. design temperature: ambient 9. vessel dimension: a) diameter: 1260 mm, b) shell length: 3150 mm 10. thickness: a) shell: 10mm, b) dish: 10mm 11. fabrication code: is-2825/asmesecviiidiv1 12.materialofconstruction:is2062oraspertherequirement. 13 .valve: 150mm ball valve- 2 qty (with each air receiver). valve make- valvora/norflow /l&t /normex. 14. surface coating: internal: anticorrosion coating, external: one coat red oxide primer and 2 coats of enamel paint. 15. accessories included: suitable safety valves and pressure gauge. note: (1) air receiver shall be hydraulically tested as per is-2825/asmesecviiidiv-1, and test certificate shall accompany the supply. (2) necessary material test & guarantee certificates shall be submitted. (3) warranty: 24 months from the date of commissioning. (4) proper name plate indicating capacity, serial number, mfg date, max working pressure, test pressure, make etc. shall be provided on the tank. (5)inspection agency: tpi agency at firms works before dispatch. [ warranty period: 24 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45672404

15 Jul, 2026 NA

Pune - Maharashtra

Tender For pune techtrol private limited, magnetic level indicating gauge for cfvs for naoh tank , pune techtrol private limited, magnetic level indicating gauge for cfvs for na2s2o3 tank

Central Government/Public Sector

CTN :45682617

06 Jul, 2026 NA

Chandigarh - Chandigarh

Tender For supply of suction pressure gauge/indicating instrument lp (0 to 10 bar) as per rdso spec. no. rdso/spec/ac/0061-2005(rev-1) suitable for use in switch board cabinet of lhb type ac coaches. item makes sifam or any other make with prior approval of rdso as per rdso spec. no. rdso/spec/ac/0061-2005(rev-1). warranty 30 months from date of delivery. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45682618

06 Jul, 2026 NA

Chandigarh - Chandigarh

Tender For supply of high pressure gauge/indicating instrument hp (0 to 40 bar) as per rdso spec. no. rdso/spec/ac/0061-2005(rev-1) suitable for use in switch board cabinet of lhb type ac coaches. item makes sifam or any other make with prior approval of rdso as per rdso spec. no. rdso/spec/ac/0061-2005(rev-1). warranty 30 months from date of delivery. [ warranty period: 30 months after the date of delivery ] ]

CTN :45688894

16 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of supply of precleaner for air cleaner , connection , o ring for moatti lub oil filter , injector nozzle assembly , zinc rod , 1/8 bsp drain cock , plate covering , valve grinding paste (901702) , joint , lub.oil pressure sensor with switch , set bolt - m12x1.75x50 - 8.8 , set bolt-m16x2x50 - 8.8 , set screw m10x1.5x35-8.8 , stud , socket head grub screw - m10x10 , slotted c sunk head screw -m6x , circlip , banjo bolt-m14x1.5 , washer spring , clip jubilee for strainer , connection piece to turbocharger , flexible hose , temp.indicator 0 50 degc. , glass fuse 300ma size 5x20 fast blow , set of 10 , fuse 1a , iso1 electrodistributor , 24vdc , solenoid return , fuse 2a , fuse 6a , se card , m.e bearings scanner exhaust gas temp , on release safety card rgm card , logic unit and , programmable output(0-20) , indicating lamp-red , with lens , holder and lamp , indicating lamp-white with lens , holder and lamp , fuse cartridge 4a(am)10x38 , watershed connection , plunger barrel assembly (dia 25 mod) , o ring 4 x22.5 perbunan , o ring , o ring (for liner collar) , temp.switch(model ti-250-s)95deg 10m capilla , pressure transmitter , pr. transmitter 0-10 bar , gfl bolts , low lub oil sump level switch , set bolt -m20x2.5x120-8.8 , set scrw -m20x2.5x40-8.8 , stud m12x1.75x45-8.8 , self locking nut , allen screw , screw , socket head cap screw-m12x25-12.9 , socket head cap screw -12x40-12.9 , socket head cap screw-m12x55-12.9 , circlip , circlip external -60mm , banjo bolt - m22x1.5 , washer copper , copper washer , copper washer(33x39) , mech dir pin , spring dowel pin , spring dowel , lock washer pair , plain bearing with bearing bush , thrust ring , locating ring , ring nut , intermediate ring , sealing disc , contact no , pressure gauge 0-4bar dial 4 bourden ss3 , analog indicator 72x72.0-4bar i p4-20m , pressure transmitter , range 0-6bar , pressure switch , set at2.0b , pf-3p4-w-bb-1x00-21b-10b-db-n-v.t , solenoid valve nc 24vdc(y94 , y97 , y142.y143 , y) , high signal selector (or module) , solenoid valve no.24 vdc (y198) , safety stop , pressure guage with glycerine , i/p-0-10 bar , pressure transmitter 0-4 bar 24vdc o/p-4-20 ma , pressure transmitter 10 bar 24vdc o/p-4-20 ma , pressure guage with glycerine , i/p-0-6 bar , selector plate (opening 1 , 3 , 5) , pressure transmitter 6 bar 24vdc o/p-4-20 ma , pneumatic distributor (7/1 , 7/2 , 7/3) fuel rack , pressure transmitter 40 bar 24v dc , pneumatic distributor (8/1 , 8/2 , 8/3 , 8/4) stop , pressure regulator (5) , on/off switch , 2 pole , off delay timer 0.2-300sec.+socket , converter module(t452 , t458)charging airtemp.f.w.temp.(0-100) , supply card , ae 24/24 , sleeve nt-hh-pn10-dn100 , damper key , spring pack(new) , o ring 8.2x680.6 (nitrile) , o ring , o ring , bush(32307) , bush(32301) , signal isolator 4-20 ma/4-20ma loop powered , bearing temp measure card (mtp card) , bearing temp alarm card (aip card) , regr. safeties temp. card (rsp card) , on release safety icm1 card , frequency divider for governor speed sensor , a.b.b t/c magnetic speed sen , solenoid valve cnomo dia-1.6 , 24 vdc , regulator for fw temp. , 24vdc , i/p-rtd , o/p-4-20 ma , green head for push button , blue head for push button , on delay relay 24v dc , threshold module , rgm card , frequency divider-turbo speed , cable (engine speed measure) , pneumatic switch for local/remote operation , selector plate (solid) , selector seal , sub base seal , pilot push in type , fresh water air cooler inlet connection , fresh water pre heating inlet connection , fuel rack indicator , pressure gauge 0-6 bars , pr. switch 1.2bar min. , pr. switch , 4140-c-k-1-e-22-aa0 , 4.1b , pr switch type 4140c-19 bar , pressure transmitter p5r-6bar-4-20-1/2-pe , pressure transmitter p5r 0-40 bar , mss module 0-150 deg(convertor) , temp switch tcm96p 40deg c decreasing , temp switch tcm96r 90deg c increasing , temp switch tcm96r 95deg c increasing , pressure transducer 0-10 bars , mss module 0-100deg.c 4-20 temp con

Central Government/Public Sector

CTN :45655573

08 Jul, 2026 NA

Mumbai - Maharashtra

Tender For rate contract for supply of spares of kpcl make air compressor with oem m/s kirloskar pneumatic company limited, pune for a period of (05) five years. - plate intermediate 185d / en-3a , washer m27; 55x28x4mm / ms /, ring o; 200x8 / silicon rubber /, s/a gland packing for cylinder 50d and 370d co2 gas compressor /, s/a cylinder 200d of diaphragm type unloader / / 3ehb4g, stud m14x2x50/34 / /, gasket for 50nb 900lbs / spriget /, bell in 115d fec f/suction valve wi th diaphragm type unloader, valve gate 1-1/4"bsp; screwedpn16# / g.m body;bs:515 /, valve gate 1/2"bsp; screwed pn16# / g.m body;bs:515 /, gasket spriget(spiral wound) 80nb;3 00# / ss-304 /, gasket for 65nb 900lbs / spriget /, gasket 139x102x3; for 3-1/2" flange 150# and 300# / caf /, gasket 15nb;600# / / spriget, cover suction valve for diaphragm t ype unloader in 200 d cylinder, plate intermediate 59d;lub/85d;lub and n/l / ci /, nipple pipe one side thread 1"x66 f or water connection 95d and 85d cylinde, air receiver 20 galllons; skid moun ted / / 4ha4, minimum pre valve assly, ring housing for gland packing / en -56 / 2ehb2g, nipple pipe both side thread; 1/4"x 330 / ms; c class / hb, piston half 330d fec side with new locking arrangement, piston half 330d ip side with new l ocking arrangement/ lm-13;bs:1490, ring intermediate for 330d piston / lm-13 / 3ehb4g, cover f.e.w/70 cr57 clearance valve pocket / / c.i, gauge level reflex type 1-1/2"flang ed;c/c-350mm / /, cooler oil; cum aftercooler / / se s-325 air cooled, ring housing for gland packing 115x 53x25,n/l / en-56, condition p /, ring for gland packing 115x53x25, n /l / en-56,conditionp /, nipple pipe both side thread 1/4"bs px75 / /, cover seal, 175x53x35 / en-56, cond ition p /, sub assembly bare cylinder 125d wit h 105cr valve pocket lub ha / /, switch pressure,8-32 kg/cm2,1spdt, 1/2"nptm,flp iia,iib,fixed diff, rod piston for diaphragm type unloader (200 d cyl) \ en-56 \, rod piston for diaphragm type unloader (140 d cyl) \ en-56 \, 8 channel temp . scannerm 115v a.c. masibus make, gauge pressure, 0-100 kg/cm2, 4"d, 1/2"npt (m), ss burdon, back flush., solenoid valve service kit 110vac(make rotex)model srg 1.8 nw p.n.sv-2,3 port., gauge pressure, 0-4 kg/cm2, 4"d, 1/2"npt (m), burdon, back flush., gauge pressure, 0-10 kg/cm2, 4"d, 1/2"npt (m), mounting back flush., gauge temp., 0-250 degree, 4" d, 1/2" bottom, il-180mm, 150# flanged., trip card, alarm sequence- aa 152, iic make, gauge pressure, 0-6 kg/cm2, 4"d, 1/2"npt (m), burdon, back flush., 110vac supply on / off switch, kaycee make, push button shrouded knob , blackcolour, tecnic make, indicating lamp pin type holder , 24v d.c, tecnic make, indicating lamps pin type holder , 24v d.c. teknic make, fuse glass, 2a, 115v a.c., gauge pressure 0-160kg/cmsq;4"d;1/2 "npt(m) ss bourden; back flish /, cup for suction filter / rubber syn theti / 300/400cfm, kit service (consisting 3nos items0 for sight glass / /, s/a cooler inter between i and ii-sta ge / / 4ehb4g, liner cylinder 350d / ci / hb, liner cylinder 245/280d / c.i /, liner cylinder 185d / ci / 2ehb2g, liner cylinder 125d for cylinder wi th 100ed valve / / 4hb4tergt, plate intermediate 280d for water c ooled gland packing / ci /, plate intermediate 370d f/ water co oled gland pkg. 134cr valve, plate intermediate 125d for water c ooled gland packing / forged steel, sub assembly unloader diaphragm for clearance pocket on f.e.c 280d hb, valve wheel 1-1/4"bsp; screwed;pn16 # / g.m;bs:5154-91 /, stud m16x1.5x40/30 / /, cover suc vlv f/134crs vlv / ms /, bolt hex head m6x1x25/25 / grade 8. 8,is-1367 /, nut lock m6 for gland packing,make-areco t-1714, ring o gasket no:2.035 for gland pkg assly ii and iii- stage /, ring o gasket no:2.042 for gland pkg assly ii and iii- stage /, s/a cylinder with liner 370/310, s/a cooler oil / / 4ehb4g, plate intermediate 370d for water c ooled gland packing / ci /, sub assembly piston 185d with iii c ompartment distance piece 2ehb4g /, ring o gasket no:2.011 for gland pkg assl

State Government

CTN :45651300

01 Jul, 2026 1.68 Lacs

Panchkula - Haryana

Tender For providing and fixing of contractor block and other electric components at various t wells in sector 5 panchkula - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 20.114.9:- supplying erection, testing of fully automatic electric control panel board for t/wells in pump chamber consisting of ms sheet of thickness 14 gauge duly painted box type floor mounted made of angle frame containing 1 no. fully automatic air brake starter suitable for motor of the following capacity, min switch of suitable range with hrc fuse, 1 no. volt meter (0 to 500 volts), 1 no. amp. meter of 0 to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in electric control panel board complete in all respect as per specification given in schedule no. ii, including mcb, suitable, capacitor, wooden box etc as per site requirement complete in all respect. 9. 50 hp motor [through rate], 20.10.3 :- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3 :- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-incharge 3. 150 mm i/d [through rate], 20.84:- providing and fixing of insulated rubber matting suitable for 11 kv installation 1 m x 2 m x 12 mm thick (is code 15652-40091) as per specification complete and as per directions of engineer-in-charge [through rate], ns item:- providing and fixing of contractor block mnx 80 landt make as per satisfaction of engineer-in-charge and attesting on load, ns item:- hiring of electronic borewell camera for videography 350 deep borewell urgently required for internal photography complete in all respect to the entiresatisfaction of engineer-in-charge, ns item:- measurement of discharge at tubewell of 1 hr after opening of upper bend with help of discharge flow meter including dismantling and reassembling of tee bend with help of chain block labour tool and plantcomplete in all respect (note any damage to site and material is responsibilityof the contractor)

CTN :45632881

30 Jun, 2026 NA

Doda - Jammu And Kashmir

Tender For supply of nitrogen purging controller model gp-ad-mc , 2.2 ltr wc 330 its gas capacity lt wt hp aluminum alloy seamless design nitrogen cylinder model ace 330 , customized metal casing , customized nitrogen puring nozzle set model n-6 , cylinder pressure control regulator ss with 2 indicating gauge and outlet flow control , customized protective back pack bag

Water Level Gauge Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors