Latest water lifting motor Tenders | Government water lifting motor Tenders

corporations/Associations/Others

CTN :41705485

24 Sep, 2025 4.00 Lacs

Kollegal - Karnataka

Tender For drilling of borewell and errection of motor and pump and arranging power supply for providing drinking water to publics at ward no 17 basthipura new extension of kollegal cmc

Central Government/Public Sector

CTN :41727011

09 Sep, 2025 NA

Dahod - Gujarat

Tender For supply of hydraulic scissor lift of approved model, having minimum plate form height 12 meter (40 ft) approx, capacity 300 kgs., hydraulic power pack (consist of ac motor car battery operated with 2 hours, back up gear pump, solenoid dc valve, pressure control valve, suction strainer, breather filler, oil level indicator and oil tank), hydraulic scissor lift shall be capable to work on battery also. item required as per technical data sheet attached. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :41713719

11 Sep, 2025 8.17 Lacs

Belonia - Tripura

Tender For providing and fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under dws sub-division, belonia during the year 2025-26. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses), tripl

Central Government/Public Sector

CTN :41727165

22 Sep, 2025 NA

Multi City - Multi State

Tender For 3/4 inch sq. drive cordless impact wrench having brushless motor and iq power control system with 4 modes: full power, half power, wrench tight and hand tight. specification: free speed-0 to 2450rpm, max. torque- 1000ft-lb, nut busting torque- 1500 ft-lb, weight incl. battery-3.5kg approx, along with 5ah/20v batteries-02 nos & 01 charger. supply along with 3/4 inch sq. drive allen impact socket-size:8mm, 10mm, 14mm & 20mm. make-ingersoll rand or aeg or ryobe or ridgid or milwaukee or dewalt or bosch or makita [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41707803

15 Sep, 2025 NA

Nalgonda-T - Telangana

Tender For supply of workshop equipments for yadadri project : : - heavy duty lathe , precision lathe , shaper , slotting machine , universal milling machine , radial drilling machine , pipe bending machine , tube bending machine , hydraulic plate shearing machine , power hacksaw , hydraulic press , cylindrical grinder , surface grinder , a-c welding machine , motor generator set , balancing machine , tool and cutter grinder , column type drill , works benches with vice , set of general tools , set of measuring tools , wheel barrow , supervision of erection and commissioning - total lump sum prices for visits , supervision of erection and commissioning -total lump sum prices for days

Central Government/Public Sector

CTN :41704768

15 Sep, 2025 22.30 Lacs

Gorakhpur - Uttar Pradesh

Tender For supply of provision of lighting arrangement for the watch tower along with solar system at kushinagar airport : : - design and sitc of off grid solar system of 1 kwp capacity along with suitable capacity inverter and 2 nos. of 150 ah solar tubular battery along with necessary module mounting structure & civil works like foundation etc. as required at site for upssf watch tower in operational area of airport., supply of 4c x 6 sq. mm xlpe insulated & pvc sheathed, armored aluminium conductor cable of 1.1kv grade as per is 7098 (part i) 1988 with up to date amendments etc. complete as required., laying and fixing of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size on wall surface as required.upto 35 sq. mm (clamped with 1mm thick saddle), laying of hdpe pipe upto size 50 mm complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing rcc/hume/metal pipe as required.upto 35 sq. mm, supplying and fixing of following way single pole and neutral, sheet steel, mcb distribution board 240 v, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 6 way, double door, supplying and fixing 6 amps to 32 amps rating, single pole, 240 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive loads in the existing mcb db complete with connections, testing and commissioning etc. as required., supplying and fixing dp mcb 32 amps, double pole, rating, 240 volts, 10 ka, c curve, miniature circuit breaker in the existing mcb db complete with connections, testing and commissioning etc. as required., wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/ recessed steel conduit, with modulat switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper stranded conductor single core cable etc. as required.(group c), wiring for circuit/ sub-main wiring along with earth wire with 2x2.5 sq.mm+ 1x 2.5 sq.mm earth wire.sizes of frls pvc insulated copper conductor, single core stranded cable in surface/ recessed steel conduit as required., supplying and fixing suitable size gi box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required., supply of 20 watt led batten surface mounted suitable for operation on 230 volt,50hz ac supply, complete etc as required., supply of 400 mm, 2100 rpm wall mounting swinging fan suitable for single phase 230 volt, 50 hz ac supply complete with motor, capacitor, mounting clamps etc. with all accessories as required complete., installation, testing and commissioning of pre-wired led fitting luminaries etc. of all types (surface/recessed) & street lights complete with all accessories. directly on ceiling/ wall , including connection with 1.5 sq.mm frls pvc insulated, stranded, copper conductor single core cable with flexible conduits and coupler and earthing etc. as required., installation of wall mount fan in the existing opening including making good the damage, connections, testing and commissioning etc. as required.upto 450mm sweep., supply of led street light of minimum lumen output of 3600 lumen made up of pressure die cast aluminum housing with membrane filter and have ip66 optical as well as electrical compartment with wide operating voltage range of 230+/- 10 percentage complete with all accessories as required., providing & fixing 32/40 mm dia b class gi

Central Government/Public Sector

CTN :41705056

25 Sep, 2025 NA

Nashik - Maharashtra

Tender For supply of drive , electrical items , servo motor , ncu fan and battery , mcp , power cable , spindle motor

State Government

CTN :41710957

03 Sep, 2025 20.00 Lacs

Muzaffarpur - Bihar

Tender For rfp/nit for supply of electrical lab equipments for electrical engineering at government polytechnic, muzaffarpur - function generator, digital multimeter, soldering iron + flux + filler material, wheatstone bridge test kit, d.c. potentiometer kit with 12v (d.c.) standard cell, meggar kit, step up chopper trainer kits with required capacity of (30v/2a and 220v/5a ratings), step down chopper trainer kits with required capacity of (30v/2a and 220v/5a ratings), 1-ph parallel inverter trainer kit using scr, 1-ph series inverter trainer kit using scr, full wave bridge rectifier trainer kit using scr and ujt, experimental kit for speed control of induction motor using pwm/csi inverters, dual trace oscilloscope, bread board, bread board jumper wires ribbon cables kit, dc voltmeter, single phase auto transformer, 8051 microcontroller trainer kit, microprocessor kit (8085 based), 7-segment lcd display kit with card, dc ammeter, ac ammeter, dc voltmeter, ac voltmeter, rheostat, circuit kit for verification of superposition theorem, circuit kit for verification of norton's theorem, circuit kit for verification of thevenin's theorem, ac funtion generator, rlc kit, connecting leads, alligator clips, oscilloscope, open loop speed control of dc motor set, closed loop speed control of dc motor set, basic feedback control system set, type '0' control system trainer set, type '1' control system trainer set, type '2' control system trainer set, test signal generator for type 0,1,2 system, dc position servo system trainer kit, automatic power factor controller, , lux meter, low power factor wattmeter, led, transistor, mosfet, faraday law trainer kit, fixed resistor of different value, inductor of different value, capacitor of different value

CTN :41705434

24 Sep, 2025 1.00 Lacs

Lohit - Arunachal Pradesh

Tender For supply of alrgear 450 combo set multi router uav power : - alrgear 450 combo set multi rotor uav power , skydroid t10 with 3 in 1 camera with batterles charger , neo m8n gps with compass for pixhawk apm , gen 14 8v 4s 8000mah 40c 80c , emax mt2213 935kv brushless dc motor for drone red cap ccw with 1045 propeller combo , emax mt2213 935kv brushless dc motor for drone black cap ccw with 1045 propeller combo , 600tvl 170 degree mini fpv av camera with audio for mini 200 250 300 drone , pixhawk 2 4 8 basic flight controller ldt with gps module combo kit , rs2205 2300kv cw brushless motor for fpv racing drone race spec , rs2205 2300kv ccw brushless motor for fpv racing drone race spec , radiomaster rp3 v2 expresslrs 24ghz nano receiver , hongli 2200mah 18650 rechargeable lithium ion battery 3 7 v 8 14wh li ion cell , speedybee f405 mini bls 35a 20 20 stack , bonka 11 1v 1500mah 75c 3s gr ultra light u2 series lipo battery , speedybee 2006 1950kv motor bee35 3 5 inch fpv , radiomaster rp3 v2 expresslrs 2 4ghz nano receiver

CTN :41705061

15 Sep, 2025 NA

Pune - Maharashtra

Tender For supply of mt spares e e - alternator assy , assy hose , assy brake master cyl , cyl assy pneumatic , retainer ratchet spring , suction hose , slave cylinder , assy master cyl , chain sprocket kit , cap assy fuel tank filler , rod assy steering drive , tapper roller brg , 17w hi power wiper motor , starter coil assy , gear shift lever assy , assy ball joint , air pipe

Water Lifting Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors