Get complete information related to latest Water Paints Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Water Paints Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Water Paints Tenders.
Tender For supply, termination installation, testing and commissioning of ventilation system on roof of paint shop of lower parel workshop along with complete installation, frame work of suitable size with ms 50mmx 50 mmx 5mm, cabling, cable try work, wiring and protection system with 4 pole 20a mcb for each and mcb board along with 2.5 sqmm cable 4 core and 10 sqmm cable from panel to distribution board for main supply and power full exhaust system of length and height minimum 1 meter with width minimum 400 mm, diameter blades 900 mm, blades rotational speed -620 r/min or more. air flow 30,000 m?/h, noise level shall be less than 70 db, power shall be minimum 750 watt with the flap system and motor starter of 1 hp or as per suitable and confirming to s/iec 60947-4-1 or latest. all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt i) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]
Tender For corrigendum : supply of 3 side brick wall of 9 inch thick with 4 ft height wall size 18feet 14ft 24ft 2ft with plastering , 1 inch x 1 inch square net jaali above the wall till the roof of 2mm thickness , 1 x iron frame door with 1inch x1inch square net of 2.00mm thickness size 4feet x 8feet with locking system. , false ceiling 372 sqft 18ft 18ft 24ft 2ft , tiling work in floor 372 sqft 18ft 18ft 48ft , 02 x ceiling fan with complete electric connection and switches , 04 x roof light 1feet x1feet with complete electric connection and switches , 02 x ss tables of tuffon glass top with six chairs cafeteria table and chair , painting and putty work of wall, painting of iron net with enamel paint , disposal of debris
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - residential; paint and repair of roof tops; service provider
Tender For corrigendum : supply of 3d printed continuous glass fiber reinforced concrete panels as per the ts , steel lintels for 2 openings above loopholes and 3 above door , box sections of size 100x100x5mm cut to length , 10mm and 12mm tmt bars , pcc solid block or class a bricks , stone patti slab each of size 600x300x50mm thick , paver block m 20 grade and 50mm thickness , flexible polyurethane foams sealant 750ml , eaterior weather proof paint , ms loop hole of size 900x400mm drawing duly painted with two coats , ms door of size 900x1850mm drawing duly painted , sand bag 18inchx34inch hdpe , pbs roll 20m x 1m , bitumen primer , well graded sand , all in one aggregate , 0 point 5mm thick cgi or metal deck or ppgi sheets for roof casting of size 20ft x 4ft , 12 mm and 20 mm tmt rebar fe 500 grade , binding wire , steel cutting blade 4 inch dia , opc oblique ppc 53 grade cement , distemper oil emulsion , three tier bunk bed , toilet accessories including ews and shower and hand wash and septic tank
Tender For supply of set of roof panels for 3-phase memu/tc coaches. coating type pu paint system to mdts-118,colour shade to ral-9001,matt finish gloss value 10-12 at 45degree,ventilator duct grill to ral ds 240 70 05 as per lno.md22151 dated 18.06.19 & 09.07.19. as per design office l.no. md21896 dated 03/10/2022 mdts-133 rev. 05 is applicable in lieu of icf/md/spec-167a mentioned in the drawings as per set list no-: mcfmprp3-phtc version 0. colour shade ral-9001 with matt finish gloss value 10-12 at 60 degree for frp ceiling panels however colour shade for roof ventilator shall be ral ds 240 70 05. packing instruction no.pi112 ver2.0. [ warranty period: 78 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For corrigendum : repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for water proofing treatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral water proofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cut
Tender For corrigendum : repair/ replacement of roof sheets and false ceiling, roof paint and miscellaneous work at bakloh cantt under age(i) dalhousie
Tender For bid to ras supply of equilateral triangular signage board made of 4 mm thick acp size 900mm with angle post of 3 mtr ht and coated in two coats of red oxide and two coats of enamel paint as per irc 67 2022 as per appx a , equilateral triangular signage board made of 4 mm thick acp size 600mm with angle post of 3 mtrs ht and coated in two coats of red oxide and two coats of enamel paint as per irc 67 2022 as per appx b , rectangle signage board made of 4mm thick acp cheveron yellow black rt and lt comb size 600x450mm with post of 3 mtr ht and coated in 2 coats of red oxide and 2 coats of enamel paint as per irc672022 , retro reflective informatory road sign board made of 4 mm thick acp with angle post of 3 mtr height and coated in two coats of red oxide and two coats of enamel paint as per irc 672022 as per appx c , delineator mild steel road delineator rectangular fixed size of height 110 cm x width 9 cm , supply fixing and erection of 11pt00 mtr span overhead structure comprising of two verticle posts of 6 mtr ht 300mm nb ms pipe with micro prismatic type iv rr sheeting as per irc 67 2022 as per appx d , reflective sigh board, as per sample attd for design speed 50 kmph size 140 mm or as per table 12 pt1 of irc 67 2022 size of board min 4x3 ft with two angle post of 3 mtr ht as per attd at appx e , providing and fixing stainless steel bus stand shelter surface finish enamel paint colour customize colour dimension 20 feet x 6 feet, roof material stainless steel , providing and fixing public toilet modular type prefabricated 4 seater size 3x12x7ft mobile toilet with tank capacity 900l , w beam metal crash barrier 4318 mm per set as per irc119 2015 complete set ) /bid number : gem/2026/b/7394067 * /dated: 28-03-2026 & & / bid document 1 / 16