Get complete information related to latest Water Proof Coating Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Water Proof Coating Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Water Proof Coating Tenders.
Tender For water based primer composed of acrilic emulsion polymer (preferable brands dr. fixit roof seal, , single component cold applied elastomeric waterproofcoating (preferable brands - dr. fixit roof se
Tender For supply of single side coated glass cloth with special waterproofcoating on one side and adhesiveon other side. size 8" width & 20 mts long in roll. as per specification (a)total thickness : 0.3 %b1 0.08mm. (astmd1000) (b) tensile strength kg/2.5cm : 35 kg/2.5 cm, min. (is-7809 or latest) (c) elongation % : 5% min. (is-7809 or latest) (d) adhesion to steel (g/2.5 cm) : 3200 g/2.5 cm, min. (is-7809 or latest (e) water permeability : not more than two drops after two hours as per pstm 373 for non-adhesive backing (f) oil resistance : passes the test as per pstm 384. (g) alkali resistance : passes the test asper pstm 385. (h) mvpt : not more than 2.00 g/sqm after 24 hours at 40 degree centigrade. when tested as per ind/me/790(a) standard. (i) weathering resistance: no cracking should be observed on the coated surface when exposed for 200 hrs. as per sae j 1960 in standard xenon dimension (a) length :20 mts (b) width : 8 inch spec:: 0.3 %b1 0.08mm. (astmd 1000). [ warranty period: 30 months after the date of delivery ] ]
Tender For urgent rewinding and heat varnishing of 60hp/415v slip ring induction motor of pump unit-1 and other allied works at belgachia dps under mdps.
Tender For supply of hand held umbrellas- electric shock proof, waterproof and sun proof as per specification : size 70 x 6 x 6 cm (approx.), weight- 500- 600 gm (approx.), straight fold auto open umbrella, canopy madeof taffeta fabric- 619 mm in size (min.), water repellent coating on the top and waterproofcoating inside. internal silver coating helps you to protect from uva and uvb rays. j handle is made of wood & ribs are powder coated metal. tube must be made up of wood provides stability and durability. make: johns/destino/costar sun with isi mark. [ warranty period: 24 months after the date of delivery ] ]
Tender For rewinding, overhauling, heat varnishing along with replacement of damaged power cables of 03 nos. chlorine booster motors, 04 nos. flocculator motors and 02 nos. floor dewatering motors at wtp-i under grww.
Tender For supply of single side coated glass cloth with special waterproofcoating on one side and adhesiveon other side.size 8" width & 20 mts long in roll. as per specification (a) total thickness 0.3+ 0. 08 mm. (b) tenslle strength kg./2.5cm 35 kg/2.5 cm, min. (is-7809 or latest) (c) elongation % 5% min (is-7809 or latest) (d) adhesion to steel (g/2.5 cm) : 3200 g/2.5 cm, min. (is-7809 or latest) (e) water permeability : not more than two drops after two hours for non adhesive backing (f) oil resistance : passes the test. (g) alkali resistance : passes the test. (h) weathering resistance: no cracking should be observed on the coated surface when exposed for 200 hrs dimension (a) length : 20 mtrs. (b) width : 8 inch [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For balance work of providing and laying polyurethane hybrid roof waterproofing coating on the terrace of dr br ambedkar block and admin block in nird campus rajendra nagar hyderabad sh balance work of dismantling & re-fixing solar panels and reinstallation of cassette acs electrical portionsubwork/packages:balance work of dismantling & re- fixing solar panels and reinstallation of cassette acs electrical portion
Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging