Latest water proofing coating Tenders | Government water proofing coating Tenders

Central Government/Public Sector

CTN :39866015

05 May, 2025 35.00 Lacs

Karwar - Karnataka

Tender For corrigendum : repairs to pvc / epoxy flooring including wall panelling pu treatment and certain miscellaneous work in otm accn magazines in site e and c at naval base karwar

State Government

CTN :40044754

23 Apr, 2025 NA

Ranchi - Jharkhand

Tender For request proposal for supplying various equipment, chemicals, standard reference microbial cultures, glasswares/ plasticwares and general items in 13 numbers of district level water testing laboratories of jharkhand a-ranchi zone - refrigerator- ( 265 litre approx., double door ),make & model: branded ( is standard), analytical balance-( 4digit), weighing capacity of 220g, externally calibrated by nabl accredited lab/agency with calibration certificate, make & model: branded) ( is standard), ph meter-(measuring range ph0.0-14.0), make & model: branded ( is standard), hot plate with magnetic stirrer-(power: 2000 watt approx., operating volts: 230 15 volts a/c), stirring capacity : 50-1500 rpm, plate size : 1 ft *1.5ft (approx), make & model: branded ( is standard), bacteriological incubator-digital construction -double walled construction outer body made of mild steel powder coated & inner body made of stainless steel, insulation : glass woll insulation between two walls. inner size : 18" x 18" x 24", rating watts 750, no. of shelves 3, capacity 120 ltrs, temp range- 5 c - 60 c accuracy +/- 0.5 c, temp controlled by : controlled by pid micro process controller with dual display. selves : with g.i. wire mesh selves, door : 2 door inner acrylic door to view sample & outer metal door with air circulation motor with blower for uniform temperature throughout chamber. heater : special nichrome heater designed for long life & saving of power consuption. thermometer type : electronic with digital display. make & model : branded ( is standard), laminar air flow chamber(biosafety cabinet)-external dimensions (lxwxh) in inches and mm:40 x34.25 x56.7, (1020 x870x 1440) work area dimensions: 34.45 x24 x22.52 (857x610x572) material of construction: galvanised iron sheet with epoxy polyester thermosetting powder coating of 80 microns, 1.5mm thickness/stainless steel grade 304,1.2mm for ss modelsbody finish: glossy off white colour for gi powder coated table top: 1.2mm ss 304 sheet of matt finish pressed on 25mm solid nuwud board side glass: 6mm float glass encased in stainless steel channels front door: frameless gas spring loaded swinging type polycarbonate 6mm thickness wheels and levelling lugs: pu solid wheels with plated brackets and metallic powder coated design: front bottom loading pre-filters or completer work area with stainless steel including hepa grill cleanliness class: iso standard 14644-1- class 5 stages of filtration: a.pre-filters= 10 with an efficiency of 90 % washable hdpe media in frp pu coated frame b.mini pleat hepa filter encased aluminium frame with an efficiency of 99.995% motor blower assembly: variable speed mtor mounted on pu coated frp blowers with aluminium powder coated impellers velocity: 100 fpm at 6 from face of the filter noise level: less than 60db at 1 meter from the face of the equipmenthepa filter grill: stainless steel grills duly perforated and polished electrical specifications: a. switches and speed controller: microprocessor controlled feather touch switch panel b. fluorescent lighting: 18 watt. c. chokes for lighting: 18 watt d. ultraviolet lighting: 1.5 feet length g15t8, 15 watt power consumption: 250 watts lighting: greater than 800 lux power supply: 230v,50hz power supply, single phase 5 amperes power cord accessories: gas burner, gas/vacuum cock ( is standard), autoclave -vertical autoclave size 14" dia x 22" ht, rating in watts 3000, capacity of 52 ltrs complete s.s with foot lifting arrangement used for sterilization under saturated steam pressure at 15psi with double walled units with inner chamber made of thick stainless steel and outer chamber made of s.s.lid is made of thick gauge stainless steel with pressure gauge steam release valve, and safety valves. with foot lifting arrangement. with s.s. basketaccessories:1. digital temperature indicator cum controller with timer -1 no.2. water level cut off-1no.3. pressure cut off switch-1no. ( is standard), digit

CTN :39711455

21 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For corrigendum : tender for supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold , ambuja , ultratech , acc , jk , dalmiya under job no 2503 op bc bkr as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63-90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make-tata , sail , jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia. , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric wt.as per store list att , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 80x40x3.2 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 50x25x2.9 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms rhs of size 96x48x3.2 , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 8mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 10mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms plate of size 12mm thick , ms frame work for roof trusses , purlin , rafter and ms plate etc all as directed make-tata , sail , jsw for ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed. , ms flat iron 40x5mm thick for wind tie make-tata , sail , jsw , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos pkt , water proofing compoundconfirming to is 2645-2003 make-pidilite , dr fixit , fevicol , quick setting compound make-pidilite , fevicol , quick fix , cement based paint snowcem make-berger , asian , nerolac , oil bound distemper washable quality of proprietary brand of make-nerolac , berger , asian , birla white wall care putty water resistant white cement make-nerolac , berger , asian , ppgi roofing sheet 10 feet x 3 feet long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4-5 micron epoxy primer specification as per store list att , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make-uniix , jindal mectec or eqv brand , synthetic paint enamelled og colour confirming to is 5-2004 make-berger , asian , nerolac , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed make-jindal , hindalco aluminium section weighing 0.55 kg oblique mtr. , anodised aluminium window triple track 2 track glass and 1 track wire mesh with frame make-jindal , hindalco aluminium as per store list att , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick thick including all fittings and as directed make-jindal , hindalco aluminium section weig

CTN :39774606

22 Apr, 2025 NA

Tawang - Arunachal Pradesh

Tender For corrigendum : supply of cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112-1989 make-birla gold, ambuja,ultratech,acc,jk,dalmiya under job no 2633 ug comd bkr as per store list attached , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 63-90 mm graded , stone for rr masonary less than 6 inch , mild steel bars of size 8mm dia conforming to is 432 part i 1982 maketata,sail,jsw , mild steel bars of size 10 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 12 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , mild steel bars of size 16 mm and above dia conforming to is 432 part i 1982 make-tata,sail,jsw , ms binding wire , wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various sizes , wooden log for props of size 3.2 mtr long 100mm dia. , app based polymeric membrane minimum weighing 3kg oblique sqm and minimum 3mm thick reinforced with polyster non wove fabric as per store list attached , priming surfaces and applying bitumen as a primer in base of app membrane , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 80x40x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms rhs of size 50x25x2.9 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms rhs of size 96x48x3.2 , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 8mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 10mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed make-tata,sail,jsw for ms plate of size 12mm thick , ms frame work for roof trusses, purlin, rafter and ms plate etc all as directed maketata,sail,jsw for ms angle of size 40x40x6 for cleat , ms nuts and bolts of length 100mm fully thread suitable for 10 mm dia nuts including two numbers of washers and 25mm of shank and two nos of washers 3 mm thick complete all as directed. , ms flat iron 40x5mm thick for wind tie maketata,sail,jsw , iron welding rod confirming to is 814-2002 isi marked 3.15mm thick 100 nos pkt , water proofing compoundconfirming to is 2645-2003 make-pidilite,dr fixit, fevicol , quick setting compound makepidilite,fevicol,quick fix , cement based paint snowcem make-berger,asian,nerolac , oil bound distemper washable quality of proprietary brand of makenerolac,berger,asian , birla white wall care putty water resistant white cement make-nerolac,berger,asian , ppgi roofing sheet 10 feet x 3 feet long and thickness 0.63 mm with grard film the ppgi sheet shall have minium coating of 4-5 micron epoxy primer and as per store list att , pre painted galvatume aluminium zinc coating gi based plain steel sheet 0.50 mm thick an colour having a tensile strength 550 mpa make-uniix,jindal mectec or eqv brand , synthetic paint enamelled og colour confirming to is 5- 2004 make-berger,asian,nerolac , painting brush 4 inch isi marked , nails various size , self taping steel screw half thread with rawl plug of 1 1 oblique 2 inch size isi marked 100 nos oblique pkt , anodised aluminium door 1000 mm x2100 double shutter with frame including all fittings and as directed make-jindal,hindalco aluminium section weighing 0.55 kg oblique mtr. , anodised aluminium window triple track 2 track glass and 1 track wire mesh with frame of size 1000mm x 1000mm including all as per store list attached , anodised aluminium ventilator 1200x600 mm fixed type with glass 4mm thick thick including all fittings and as directed as per store list attached , ms anchor bolt, suitable for rcc work, 12mm dia, 300mm long with 2 washer and a nut minimum wt of each bolt and nut is 450 gm

Corporations/Associations/Others

CTN :40046987

02 May, 2025 2.68 Lacs

Tiptur - Karnataka

Tender For providing and applying terrace screed repair with uv resistant water proofing coating to existing urban health center and library block in gandhinagara park premises in tiptur cmc limit

CTN :40034525

23 Apr, 2025 7.55 Lacs

Santaldih - West Bengal

Tender For epoxy grouting and ancillary maintenance work at rail track base beam of 12 nos of hopper at track hopper, stps.

CTN :40043494

24 Apr, 2025 NA

Patna - Bihar

Tender For be-cafe job - jaya fuels - , floor tiles :providing and laying sydney cemento(kajaria) floor tiles 1200 x 600 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is :15622 of approved make to be laid with 5 mm spacer groove & later the groove to be filled with matching colour epoxy grout. laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarsesand) complete(alternate brand somany/jhonson/nitco/equivalent but in same colour & texture ) , dismantling tile work in floors laid in cement mortar including stacking material within 50 metres lead for thickness of tiles 10 mm to 25 mm , dismantling cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer ^in charge 1:3:6 or richer mix , toilet floor tiles:providing and laying cario gris (kajaria) floor tiles 600 x 600 mm (thickness to be specified by the manufacturer)of 1st quality conforming to is :15622 of approved make to be laid with 5 mm spacer groove & later the groove to be filled with matching colour epoxy grout. laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarsesand) complete(alternate brand somany/jhonson/nitco/equivalent but in same colour & texture ) , toilet dado tiles 01: providing and fixing 1st quality previledge cement 600x300mm (kajaria)to be laid with 5 mm spacer groove & later the groove to be filled with matching colour epoxy grout.wall tiles conforming to is : 15622 (thickness to be specified by the manufacture ) of approved.dados over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm.(alternate brand somany/jhonson/nitco/equivalent but in same colour & texture ) , "toilet dado tiles 02: providing and fixing 1st quality previledge gris 600x300mm (kajaria)to be laid with 5 mm spacer groove & later the groove to be filled with matching colour epoxy grout.wall tiles conforming to is : 15622 (thickness to be specified by the manufacture ) of approved.dados over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm.(alternate brand somany/jhonson/nitco/equivalent but in same colour & texture )" , "kitchen dado:providing and fixing 1st quality arctic white atic2a 300x100mm (johnson)to be laid with 5 mm spacer groove & later the groove to be filled with matching colour epoxy grout.wall tiles conforming to is : 15622 (thickness to be specified by the manufacture ) of approved.dados over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm.(alternate brand somany/jhonson/nitco/equivalent but in same colour & texture )" , wc: providing and fixing white wall mount vgs-wht-81953uf-vignette(jaquar) rimless wall hung with uf soft closing seat cover.(european type) , :jaquar/cera/hindawre make , "pvc pipe for waste line: supplying and fixing approved make pvc pipes and specials equivalent make including cutting pipes, fixing to walls or brackets using ms clamps, making joints using solvent cement solution, using ring seal couplers on size of pipes of fully sizes cutting walls or concrete surface, making grooves in masonry to conceal the pipes, restoring damaged portions with cm 1:4 and jelly, to their original condition,conducting leak test, fixing and removing temporary scaffolding, conveying dismantled debris and disposal of debris away from the size etc. complete" , "upvc pipe for water line:supplying and fixing approved make upvc pipe with isi brand fittings such as tees, elbows,unions, nipples, flanges, etc. including cutting, threading, cutting chassing in walls and concealing the pipes in wall wherever laid inside the toilet complete with making holes in walls,floors, slabs, etc. earthwork excavation, back filling to consolidation, redoing the distrubed portions,ms frame work & clamp for pipe laying, ms/brick in cm supports testing and c

State Government

CTN :39836802

01 May, 2025 16.66 Lacs

Gandhinagar - Gujarat

Tender For corrigendum : the work of anti corrosive epoxy painting on various pipelines, vessals, tanks & structures etc. of ash handing system of ashplant unit 3,4 & 5 of gtps as per scope of work & instruction of eic

Central Government / Public Sector

CTN :40004695

22 Apr, 2025 80.37 Lacs

Kandla - Gujarat

Tender For custom bid for services - supply of spares for railway track maintenance contract at kandla foreshore terminal-schedule - a (supply of railway track material): 1, fish plate 60kg 1meter long, with bolt 12.00 pair, 2, fish plate 52kg 1meter long, with bolt 25.00 pair, 3, fish bolt 25x140 100.00 nos, 4, curved switch 52kg, 1:8.5 with fitting 1.00 set, 5, supply of 50mm ballast 900.00 mt, 6, supply of rail 60kg 3.922 mt, 7, supply of rail 52kg 13.491 mt, 8, check rail distance block 200.00 nos, 9, check rail bolt 25x190 full thred 225.00 nos, 10, single coil spring washar 500.00 nos, 11, j clip 750.00 nos, 12, grsp 5000.00 nos, 13, sleeper 60kg 40.00 nos, 14 juction fix plate 52 & 62 kg combination, 1meter long , (4plate called 1 set) 2.00 set, 9, 15 supply of cms x-ing 52 kg with checkrail &, fitting 1.00 set, 16, erc m-3 5000.00 nos, 17, gfn liner t-3702 (52kg rail & sleeper) 2500.00 nos, 18, ms liner t-3738 (52kg rail & sleeper) 5000.00 nos, 19 gfn liner t-3707 & 3708 (52kg rail & 60kg, sleeper) 2500.00 set, 4 sub-total for schedule - a, schedule - b (railway track work), 1 renewal of tongue rails & stock rails (straight or, curved) complete with fittings & fastenings,, ensuring proper housing & changing of stretcher, bars, if required; but excluding sleepers. work, also includes drilling of hole, if any required and, fixing of fish plates. released rails shall be, stacked at indicated place. {note : 1).one set, means two tongue rails and two stock rails (2), in case when only one tongue & stock rail are, replaced, only 50% of the quantity shall be, payable. (3) if only one tongue rail is replaced,, only 25% of the quantity of switch assembly shall, be payable} for respective item., 2.00 set, 2 deep screening of track in terms of para-238 of, indian railways permanent way manual in other, than psc sleepers of any density and screening, of complete ballast section. it includes opening of, ballast, digging down to specified depth below, bottom of sleeper to provide formation slope of, 1:40 towards drain or any prescribed direction,, taking out caked ballast, muck etc. from entire, ballast section, putting back clean ballast as per, required ballast profile, throwing away screened, muck arising out of screening on toe of bank or, on cess, if low or on spoil banks above top of, cutting (including throwing and leveling, if, required beyond minimum 5m from the edge of, cutting which are upto 3m deep or alternatively, carting it upto 50m for disposing it off beyond, cutting or platforms) as per direction of engineer, in-charge, including cutting cess, if required for, effective drainage upto a distance of 3.5m from, centre line of track on both sides and including, one round of kutcha packing with screened, ballast including attending to track parameter to make track fit for 20 kmph speed. necessary, wooden blocks shall be brought by the, contractor. 450.00 trm, 3 through packing of track, as described in para-, 224 of indian railways permanent way manual - 1350.00 trm, 4 fabrication (including cutting & bending) and, fixing of check rails of all sections as per, railway s approved drawings & specifications for, level crossings / trolley paths, duly cutting rail, flanges, wherever required to correct alignment, and level with railway s rail, fittings & fastenings,, drilling of holes in heck rails with all fittings, e.g., rail screws / grip expansion bolts, brackets,, packing pieces, bolts, washers etc. and as, directed by the engineer in-charge, 192.00 rm, 5 providing and injecting approved grout in, proportion recommended by the manufacturer, into cracks/honey-comb area of concrete/, masonry by suitable gun/pump at required, pressure including cutting of nipples after curing, etc. complete as per directions of engineer-incharge. (the payment shall be made on the, basis of actual weight of approved grout, injected.) epoxy injection grout in concrete/rcc, work of approved, make, 50.0