Tender For rewinding, reconditioning and replacements of spares for 850kw, 6.6kv, ht motor at peddapur phase-iv, pumping station, replacements of spares for existing pumps at phase-iv, peddapur including dismantling, loading, transportation, unloading, erection, testing and commissioning of and ht motor under mwss, eam cell-ii, peddapur, transmission division no-ii, patancheru
Tender For supply, delivery and installation of different electro-mechanical accessories at loba pwss under bolpur mechanical division, phe,dte. - supply and delivery at site of following vertical submersible pumpingmachinery directly coupled with wet winding type suitable size submersible motor with following specification: method of starting : dol / s/d, shaft-s.s, impeller- s.s / crome steel / gm, outlet - 80/100 mm dia motor : operating voltage : 415 ( 10 %), phase : 3ph, 50 hz 6%speed : 2900 rpm, method of starting : s/d(make : ksb / grundfos / texmo / cri / kbl / mbh / or any approved vendor.) ( n.b : manufacturers test certificate along with charecteristics curve and gurantee certyificate have to be submitted at the time of delivery.), a)discharge (q) : 20m /hr.head (h) : 36 mtrs., b) discharge (q) : 27m /hr.head (h) : 42 mtrs., c) discharge (q) : 27m /hr.head (h) : 51 mtrs., d) discharge (q) : 30m /hr.head (h) : 57 mtrs., installation of submersible pumpingmachinery to newly sunk tubewell along with column pipes (as required), top cover, valves, and specials of above with protection pipe and supply of ms clamp, nut bolt, cable gland socket etc. making inerconnection of the pump delivery line to pump collecting main line near tubewell with supply of all necceasary pipe, reducer/enlarger, gi/ms specials etc. including brick, sand, cement, rod etc and laying & drawing of all actuator cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of eic., add: gst @ 18% on sum of item no: 1.00 to 2.00, add: cess @1% on sum of item no. 1.00 to 3.00
Tender For sinking of new tubewell, supply, erection and commissioning of submersible motor and pumpset including kiosk shed with all electrical accessories. providing, laying of distribution line, pumping main and interlinking with the existing pipe in t.s. no
Tender For supply of materials for construction in gram panchayat bagsara athuna (for mgnrega verius ,plans on bsr 2025-26. f.y. 2025-26-, diesel road roar 8 to 10 tonne, , sheep foot roller, , truck 9 tonne, , tractor (25.40 hp), , tractor trolley, , tractor water tanker capacity 4000 litres water, , cement concrete mixer 57 pan foot, , pumping set 15 h.p., , niddle/plate vibrator with operator, , camel cart/bullock cart with driver, , grinding machine with operator (large motor driven), , compressor, , hydraulic excavater/jcb (bucket capacity 0.4cum), , dumper, , scraper, , shuttering of wooden planks with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of ply with poles and other materials to be installed on tpsite and removed after the stipulated period, , shuttering of iron plate with poles and other materials installed on tps site and removed after a specified period, , water and pumping material (filling), , grinding machine (small operator, hand operated), , padla/kankar/jhajra, , mortar-soil/mud-masala, , lime from brick kiln for roasted masonry work, cement, ppc, white cement, fine aggregate, sand/bajri, gravel local, fly ash, surkhi, stone dust in masonry work, gitti of stone/brick (for other than road work), 40mm measured stone (hand broken grit) (boids cut 1/11), 40mm grit of stone (broken by crusher) (boids cut 1/11), 20mm chit of stone (broken by crusher), 12/10/6mm chit of stone (broken by crusher), brick clay, material for machining work (5 km, including lead), 6340mm stone crushed stone (boids cut 1/11), 63.40mm stone crushed stone (boids cut 1/11) cut 1/11), 9045 mm, hand broken stone aggregate (boids cut 1/11), quarry ravinsh. boids cut 1/6), graven (voids cut 1/6), puncture (boids cut 1/6), (22.5 x 11 x 7.50 cm), pacham peni (1st class), dinesh cheni (ii class), bhonima masonry stone, vinai nerada (rr), nimai gada (cr), baja gaalim upto 15cm height for purge work), paraja monim (23cm height for gadak/gharanja work), jodhpuri rai stone strip dhap shovel pieces (mumbai 2-3. thickness 10-12", thickness 2.5-3.5"), flaky material (3-4" thick & length and width 1-, 2), minister (dpc, sill, coping, lintel, tand, almirha etc), upto 25mm thickness, upto 21-40mm thickness, upto 40-50mm thickness, upto 50-75mm thickness, upto 75-100mm thickness, upto 100-150mm thickness, parn / patti patan katja stone, ? , 001 to 2300 cm, , more than 200 sq. cm, marble powder, marble stone (gajnagar ii quality/local 20mm thick., 000 sq. cm, 901 to 2300 burn cm and, more than 2300 perm, stone frame, single patam size 100 x 75 mm,, either patam size 125 x 75 mm., stone strips, up to 1.5 m length, minimum 40mm thick, 1.5 m to 2.40 m length, minimum 50mm thick, 2.4m to 3.0 m length, minimum 65mm thick, above 3.0 m length, minimum 75mm thick, precast tiles/blocks, glazed size-30x45 cm, mosaic size 40mm thick, vitrified size-60x60 cm, interlock tiles/brick/block for road work, cement interlocking block m-30grade, 60mm thick, cement interlocking block m-30grade, 80mm thick, cement interlocking block m-30grade, 100mm thick, fr pvg insulated copper conductor single core cable 151 marked, 1.50 sq.mm, -, , 4.00 sq.mm, 6.00 sq.mm, 0.50 sq.mm, 1.00 sq.mm, local wood with fittings (for doors, doors and fences.) fire, acacia, others, factory made doors (30mm thick solid core single pane., structural steel, +, iron (door steel fe 415/500 for reinforcement), winding wire 18 gauge, iron girders, conia iron pokor bar/patti/angle iron, barbed iron wire (size 12 guage wire and 12 guage strad/12 guage wire and 14 guage strad/14 guage, mesh, iron mesh (24 gauge, mesh), cement concrete mesh akash patal 40mm thick, 3mm thick glass, paint, enamel paint, distorter (water bound), lime for painting (aras/kali), primer (for iron/wood), petroleum products, diesel hsd, mobil oil, , hand wash-basin 450*300mm with cupintv p.v. m. vent pipe, stone bar (5.w.) pipe 100 m.m. diameter, 0.6 m. long, m. p. pillar cock (dia
Tender For operation with running maintenance, surveillance, upkeepment of seasonal pumping station and 06 vented sluice gates including sump barrier cleaning etc and supply (hire basis) and operation of 03 nos diesel and 02 nos electric motor driven portable p
Tender For construction of 2 nos. of infiltration well at ponnankurichi (tamirabarani river bed) with 25hp motor and pumping line 360m with hdpe 180 mm dia pn8 from ponnankurichi scheme near river bed to pump room in moolaikaraipatti balance work to be carried
Tender For designing, supplying, erecting, testing and commissioning of pure waterpumpingmachinery at various sumps with all allied electro-mechanical equipments in 27 villages under amrut 1.0 scheme
Tender For complete mechanical repairing and overhauling of 400 kw and 180 kw,3.3kv marathon make induction motor for pumping operation at akkocp, bnk area