Latest water pumps Tenders | Government water pumps Tenders

corporations/Associations/Others

CTN :43166042

29 Dec, 2025 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle cad cwph i upkeepement and attending minor repair works for ensuring uninterrupted and smooth running of cooling water pumps and tws in unit i, ii and iii for the period from01.04.2026 to 31.03.2027

corporations/Associations/Others

CTN :43150145

25 Dec, 2025 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle cad cwph ii upkeepment and attending minor repair works in cooling water pump house ii, sea water pumps available in filtration plant of cwph ii for the period from 01.04.2026 to 31.03.2027

corporations/Associations/Others

CTN :43150167

25 Dec, 2025 NA

Tuticorin - Tamil Nadu

Tender For ttps operation circle cad cwph ii upkeepment and maintenance works in large dia pipelines, column pipes and accessories of cooling water pumps, discharge butterfly valves, 25 5 ton eot crane and chlorination plant available in cwph ii for the period

corporations/Associations/Others

CTN :43199536

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For supply of 200nb hand operated gate valve for ash water pumps and ash slurry pumps of stage 1 and 2

CTN :43244732

25 Dec, 2025 24.12 Lacs

Thumba - Kerala

Tender For replacement of chilled and condenser water pumps at central water chilling plant, vrc, vssc

CTN :43240671

05 Jan, 2026 NA

Mettur - Tamil Nadu

Tender For procurement of cutless rubber bearing for cooling water pumps of stage â€“ ii.

CTN :43207074

05 Jan, 2026 NA

Tuticorin - Tamil Nadu

Tender For supply of 200nb hand operated gate valve for ash water pumps and ash slurry pumps of stage i & ii. note: 1. prospective bidders may get the specification free of cost by downloading from the following websites. tangedco www.tangedco.gov.in nic https://tntenders.gov.in/nicgep/app tender opening (electronically): o/o the superintending engineer/p&a/ttps tuticorin. (executive engineer/sp/ttps)

CTN :43168515

01 Jan, 2026 43.05 Lacs

West Tripura - Tripura

Tender For supplying, installation, testing and commissioning of machines and equipment for civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura for the project improvement of infrastructure in ttaadc polytechnic institute, kh - supplying, installation, testing and commissioning of machines & equipment in civil engineering department at ttaadc polytechnic institute, khumulwng, west tripura under the nec scheme "improvement of infrastructure in ttaadc polytechnic institute, khumulwng, west tripura, district under higher education departmen.", computerized universal testing machine, 6 pillar type, for conducting tests on various types of ferrous and non-ferrous materials; consisting of-loading unit 600 kn capacity, hydraulic jaws and pumping system, clamping jaws for round specimens, clamping jaws for flat specimens, pair of compression plates,for compression test, rollers of 160 mm width and 30 mm diameters, for transverse test, bending table stopper, allen keys, spanners,double shear test attachment, bend rebend test attachment, electronic extensometer., steel bar cutting machine, vernier caliper, stainless steel ruler, 1m length, mixer machineriesconcrete mixerthe counter balanced mixing drum is easy to tilt two cubic feet mix capacity. total drum volume is 3 cubic feet.. suitable for operation on 220 volt single phase, 50 cycle, a.c. supply, isi cube mouldcube mould, with base plate : as per is : 516 with isi mark cube mould, 15 cm x 15 cm with base plate (made of cast iron - isi mark), cement mortar cube mouldcement mortar cube mould cube mould, 7.06cm x 7.06cm with base plate (made of mild steel), vibrating machinevibration machine with timer : is : 4031 this apparatus is suitable for making cubes of 70.7 mm. for mortar strength evaluation. the mould is mounted on a vibrating platform with a frequency of 12,000 400 vibrations per minute. to the platform are attached four matched springs. the whole assembly is operated by a revolving shaft with an eccentric mechanism. the machine is supplied with a timer, a switch mounted on a steel panel and a 70.7 mm. steel cube mould with a base plate., electronic balancecapacity 500gm, 0.01 gm accuracy, electronic balancecapacity 5kg, 0.1 gm accuracy, electronic balancecapacity 20kg, 0.5 gm accuracy, electronic balancecapacity 100 kg, 10g accuracy, air permeability apparatus (blaine type)isi certification mark is;5516, fitted in aluminium box, vibrating tablevibrating table for compaction concrete cube, cylinders the table deck size 50 cm x 50 cm and has stops along its edges to prevent moulds from walking off the table during vibration the variably pitch pulley arrangement permits the frequency to be varied sleeplessly between a maximum of 3600 vibrations per minute a speed regulation handle is provided for increasing or decreasing the frequency. the vibrating deck. a switch is provided for starting the motor. operation on 440 volts, three phases, a.c. supply. table top - 50 cm x 50 cm, curing tankwater curing bath with agitation system digital indicator for temperature * 24- hour cycle from time of mixing * controlled 100 c +/- 2 c. temp. for concrete * controlled 27 c + 2 c curing temperature for grey cement the tank has been designed to accommodate 150 mm / 70.6 mm casted cubes up to 12/24 cubes and fully insulated. complete with a hinged lid, heated, thermostat and recirculation pump. provision of two removable racks allowing free circulation of water around each cube. the pump, drain valves and electrical equipment are housed in a compartment located at one end of the tanks. the tank is heated by an immersion heater under normal conditions and refrigeration system for grey cement, the temperature is controlled at 35deg.c. +/- 2 deg.c, for about 15 minutes after immersion of the freshly-made specimens. curing tank for 12 moulds of 150mm/24 moulds of 7.06mm, vicat apparatus boxwith isi certification mark, is:5513, fitted in aluminium, le-chatelier mouldwith

CTN :43200666

25 Dec, 2025 NA

Tumkur - Karnataka

Tender For supply of supply of flaring unit manual 6 head online , supply of valve opening unit manual online hydraulic 3 hp flp , supply of degassing unit 5 head auto plc based online closed loop , supply of chain conveyor with all sections leg supports hand railing drive shafts sprockets shafts bearings soap tray chain counter weights , supply of drive units 5 hp nord make hollow shaft gear unit with flp motor flp push button with stand , supply of caustic soda washing tank s. s 1. 5x1. 2x1. 0 mtr 3 mm thick , supply of water washing tank ms 1. 5x1. 2x1. 0 mtr 6 mm thk , supply of hydrotesting unit 10 head non tilting individual pr. gauge with isolation valve bottom mirror with rovs sight flow indicator air and water vessels water pumps , supply of internal cleaning vaccum cleaner 3 hp water colletion tank , supply of over head conveyor , supply of caterpillar drive unit 5 hp , supply of oven 2. 5 x 1. 5 x2. 5 mtr 15 kw , supply of primer paint booth water curtain 5 hp blower 25 ltr pressurised feeder tank spray gun hoses , supply of finish paint booth water curtain 5 hp blower 25 ltr pressurised feeder tank spray gun hoses , supply of valve tightening online hydraulic 3 hp , supply of check scale 100 kg capacity electronic jisl , supply of tare wt punching hydro pneumatic , supply of high pressure compressor 15 kg pressure , supply of pneumtic testing 5 head online auto pplc based , supply of g. i bottom conveyor tray of 1. 6 mm thk , supply ofservice water pipe line 1. 5 inch with flanges bends collars ball valves , supply of service air pipe line 1 inch with flanges bends collars ball valves , erection and commissioning of flaring unit manual , ) /bid number: gem/2025/b/7001512 * /dated: 15-12-2025 & & / bid document1 / 35erection and commissioning of valve opening unit manual , erection and commissioning of degassing unit , erection and commissioning of chain conveyor , erection and commissioning of drive units 5 hp , erection and commissioning of caustic soda washing tank , erection and commissioning of water washing tank , erection and commissioning of hydrotesting unit 10 head , erection and commissioning of internal cleaning vaccum cleaner , erection and commissioning of over head conveyor , erection and commissioning of caterpillar drive unit 5 hp , erection and commissioning of oven 2. 5 x 1. 5 x2. 5 mtr 15 kw , erection and commissioning of primer paint booth , erection and commissioning of finish paint booth , erection and commissioning of valve tightening , erection and commissioning of check scale , erection and commissioning of tare wt punching , erection and commissioning of high pressure compressor , erection and commissioning of pneumtic testing , erection and commissioning of g. i bottom conveyor tray , erection and commissioning of service water pipe line 1. 5 inch , erection and commissioning of service airline pipe line 1 inch , dismanttling of chain conveyor , dismanttling of drive units , dismanttling shifting and relocation of valve tightening machine , dismanttling shifting and relocation of check scale , dismanttling shifting and relocation of tare wt punching , dismanttling shifting and relocation of high pressure compressor , dismanttling shifting and relocation of pneumtic testing