Latest water ring vacuum pump Tenders | Government water ring vacuum pump Tenders

Central Government/Public Sector

CTN :45022601

19 May, 2026 45.00 Lacs

Dehradune - Uttarakhand

Tender For repair and maintenance of lowering and lifting of submersible, centrifugal, monoblock pump sets, swimming pool filter plant, routine maint of swimming pools including connected works at ge ima dehradun

State Government

CTN :45039669

07 May, 2026 55.53 Lacs

Faridkot - Punjab

Tender For earthwork in excavation in trenches for laying of underground pipeline, lowering and jointing of rcc pipes of various diameters, fixing of airvent pipes, risers, alfa-alfa valves and pump stand pipes at 3 different sites

Central Government/Public Sector

CTN :45045412

21 May, 2026 2.30 Crore

Ganjam - Odisha

Tender For supply of slurry pump - 6 or 4 dah, rate of flow-150 m3 per hr as per technical specification,vertical multistage centrifugal pump fitted with motor for condensate water as per technical specification,slurry pump model - 40 pv-sp, size - 40mm as per technical specification,vertical sump pump model - 65 qvsp as per technical specification,vertical sump pump model - 100 rvsp as per technical specification,pu lined slurry pump model - 2 or 1.5 bah as per technical specification,pu lined slurry pump model - 3 or 2 cah as per technical specification,non-metallic horizontal centrifugal pump without motor as per technical specification,water ring vacuum pump with standard accessories as per technical specification,dm plant pump as per technical specification,boiler feed pump as per technical specification,metallic lined slurry pump model - 4 or 3 dah as per technical specification,caustic lye pump as per technical specification

State Government

CTN :44977863

08 May, 2026 NA

Ranchi - Jharkhand

Tender For e-quotation for seeking firm rates for non-schedule items for preparing estimates. - s/i/t/c of new 80 hp vt pump set, supplying,installation,testing and commissioning of vt pumpset (confirming to is1710:2021 standards) with 35 ft suitable size ms column pipe assembly in random length of 5 ft.(make-jyoti/wpil/kirloskar) with ss/bronze impeller capable to discharge 216 m3/h against a total head of 68m coupled with vertical solid shaft tefc ie3,ip55 type squirrel cage induction motor (make-siemens/crompton/abb) operating on 3 phase 50 hz,415v+- 10% supply and having speed 1400-1500 rpm (bhp of motor should be 10% more than that of pumpset including cost pof supplying,fitting and fixing of all required accessories, repairing of 80 hp vt pump set at raw water, supplying all labour tools and tackles for taking out the 40hp vt pump set with bowl assembly, column pipe and line shaft etc., cost towards dismantling of complete bowl assembly., cost towards repairing and fitting the parts of vt pumpset as per requirement (works as complete overhauling of the pump) such as:-1.machining/lathe work 2.changing ss top shaft,line shaft(2 nos of 5 feet) of and bottom shaft2.repairing of bowl assembly and impleller3.supplying and fitting c.l spider bearing with rubber cut less bush-4nos4.supplying and fitting of worn-out nut-bolts,bolt-nut washer,gland body bush machining,other machining works,etc as per requirement, complete assembling the pump set and lowering including supplying all petty materials., cost for supplying and installation of required accesories for repair and maintenance of motor control panel such as:-150 amp contactor-2 no (for 1 no starter)160 amp,breaking capacity -36ka mccb 1 no56-90 a electronic overload relay-2 nostimer-2 nosvolt meter 1 nosamp motor 1 nospilot lamp 6 nosselector switch 4 nossingle phase preventer 2 nos[ all accessories of reputed make]with complete internal wiring with suitable size of copper wire and testing on load., repairing of 30hp c/f pump sets at clear water, cost for dismantling of 30 hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb - 50 amp,25ka,3pole-2 nos (for motor backup protection),mccb -100 amp,50ka,3pole-1 no (main mccb)2.overload relay 26-40 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required, repairing of 15hp c/f pump sets at clear water, cost for dismantling of 15hp c/f and pump inspection,changing of its damaged parts such as:-key-01 no, gland tightner -1 set, gland tightner stud-2 nos, c.i bearing housing with cap -1 set, ball bearing 6306 (skf)-2 nos, grease, gland packing,maching of the pump parts as per required etc all complete and testing on load etc., cost towards complete repairing of motor control panel starter 30hp cf pump set opening and changing of damaged parts such as 1.mccb -25 amp,15ka,3pole-2 nos (for motor backup protection),mccb -50 amp,25ka,3pole-1 no (main mccb)2.overload relay 20-25 amp-1no3.star delta timer-1no4.digital volt meter,ampere meter,three pahse indicator lamp,push button on/off,on/off/trip indicator,wiring,etc as per required

Central Government And Public Sector

CTN :44802983

06 May, 2026 NA

Surat - Gujarat

Tender For corrigendum : supply of water ring type vacuum pump d d - water ring vacuum pump with installed coupling set coupling guard exhaust valve non return valve ss automatic drain valve and air cock with as per drawing no. - 305 r2 , mechanical seal assembly part no. 2tf120 423 spare of water ring vacuum pump with model serial no. - 2t-50-d spl 5847 for one to one replacement. moc - as per drawing no. - 305 r2 - as built , complete shaft vane wheel impeller 1st and 2nd stage part no. - 2t f 120 258-r, 2t i 120 2453, 2t ii 120 2454 in assembled balanced condition with as per drawing- 305r2- as built , coupling set with rubber spider part no. - l-100 as spare of water ring type vacuum pump with model serial no. - 2t-50-d spl 5847. moc - as per drawing- 305r2- as built , bearing of water ring type vacuum pump with model serial no. - 2t-50-d spl 5847.moc - as per drawing- 305r2- as built , intermediate disc s and e set part no. - 2t f 120 433 01 set - 02 no. as spare of water ring type vacuum pump with , as per drawing- 305r2- as built , control disc suction side part no. - 2t f 120 432s as spare of water ring type vacuum pump with phosphor. bronze is-28 grade -2 - 1985 as per drawing- 305r2- as built , control disc exhaust side part no. - 2t f 120 432e as spare of water ring type vacuum pump with p. bronze is-28 grade -2 - 1985 as per drawing- 305r2- as built , distance piece part no. - 2t f 120 2533 as spare of water ring type vacuum pump with for one to one replacement. moc - ss-304 as per drawing- 305r2- as built , key part no. - 2t f 120 2563 as spare of water ring type vacuum pump with for one to one replacement. moc - ss- 304 as per drawing- 305r2- as built , key part no. - 2t f 120 2564 as spare of water ring type vacuum pump with model serial no. - 2t-50-d spl 5847 for one to one replacement. moc - ss-304 as per drawing- 305r2- as built , flap ring set part no. - 2t f 120 2553 01 set - 02 no. as spare of water ring type vacuum pump with for one to one replacement. moc - neoprene rubber as per drawing- 305r2- as built , bolts for manifold with plain washers 01 set - 16 no. as spare of water ring type vacuum pump with model serial no. - 2t-50-d spl . moc - sa 193 gr b-7 , as per drawing- 305r2- as built , bolts for bearing case cap with spring washers 01 set - 08 no. as spare of water ring type vacuum pump with .moc - sa 193 gr b-7 , as per drawing- 305r2- as built , bolts for stuffing box with spring washers 01 set - 08 no. as spare of water ring type vacuum pump with for one to one replacement. moc - as per drawing- 305r2- as built , lock nut part no. - 2t f 120 256 2 r1 for water ring type vacuum pump with for one to one replacement. oc- ss 304 as per drawing no. -- oem drawing- 305 r2- as built

CTN :45019593

08 May, 2026 4.43 Lacs

Bardhaman - West Bengal

Tender For lowering of 150-meter head,550v submersible pump-motor set along with 6-inch dia ms pipe (16 nos in borehole) at new borehole near siduli 5 number pit by cl jambad colliery under kenda area and joining of 6 inches dia ms pipes (500 meters approx.)

CTN :44989247

05 May, 2026 11.92 Lacs

Ramgarh - Jharkhand

Tender For repairing, reconditioning and maintenance of 02 nos. borewell including deepening, replacement of worn-out components, lowering of submersible pump and allied works under sayal-d project, barka-sayal area.

State Government

CTN :44885468

07 May, 2026 6.00 Lacs

Jhunjhunu - Rajasthan

Tender For corrigendum : annual rate contract work of unlowering/lowering submersible of motor pump set from existing tubewells under phed jen section nawalgarh

State Government

CTN :44883196

07 May, 2026 6.00 Lacs

Navalgarh - Rajasthan

Tender For corrigendum : annual rate contract work of unlowering/ lowering of submersible motor pump set from existing tubewells under phed jen section nawalgarh

CTN :44999812

08 May, 2026 10.00 Lacs

Dabra - Madhya Pradesh

Tender For repair work of damaged defective open well submersible motor pump sets panels starters of various tube wells including lowering lifting dismantling reinstallation transportation from site to fro loading unloading labour complete

Water Ring Vacuum Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

Central Government And Public Sector

State Government

State Government