Latest water seal Tenders | Government water seal Tenders

State Government

CTN :41346895

27 Aug, 2025 64.86 Lacs

Sarni - Madhya Pradesh

Tender For procurement of spares for sam turbo make ash slurry pump (model no. ar150 /510) installed in ash pump house of unit no. 10 and 11 of stps-iv, sarni. - labyrinth(pump end) part no.14p, labyrinth(drive end) part no.14d, impeller with impeller nut part no.18,38,50,58, shaft with key part no.4,31,32, lantern restrictor part no.13, wear plate (b.side) with insert part no.16,161, wear plate (s.side) with insert part no.19,191, split gland part no.10, grease retainer part no.7, stud (base/,brt. side cover)hex nut, washer part no.45,46,46a, piston ring part no.51, expeller part no.14, expeller housing part no.9, volute casing part no.17 shaft sleeve part no.12, bearing housing part no.3, grease nipple part no.26, lock nut part no.47, motor pulley part no.386-166-sc6, pump pulley part no.599-166-sc6, suction cover part no.21, bracket side cover, dome nut

corporations/Associations/Others

CTN :39909489

08 Aug, 2025 NA

Cuddalore - Tamil Nadu

Tender For bid to ras tender for supply ofbeacon weir spares - impeller(bronze) 3l3 pump , pump shaft with accessories-3l3 , shaft sleeve (ms) - 3l3 pump , coupling complete set 3l3 pump , wearing ring (neck ring)-3l3 pump , stuffing box bush - 3l3 pump , grease cup , water thrower 3l3 , water seal pipe 3l3 pump , distance piece hylam , swing bolt with nut , pump shaft- sdb 125/150 , water thrower for beacon wier pump model , impeller sdb125/150 , distance piece for beacon make pump mode , stuffing box bush for beacon wier make p , coupling complete set , split gland for beacon wier pump moel sd , wearing ring (bronze) -sdb125/150 pump , shaft sleeve bwc 80/100 , wearing ring casing ci , air cock , impeller (bronze) - bwc 80/100a , bearing cover (nde) - bwc 50/80 pump , bearing housing (de) ci - bwc 50/80 , bearing housing nde , latern ring for esp 50/80 , casing stud with nut , coupling complete set , bearing cover (de) ci - bwc 50/80 pump , casing wear ring , impeller-dia 242mm for bwc 50/80 esp con

Corporations And Associations And Others

CTN :41095426

13 Aug, 2025 94.67 Lacs

Panchkula - Haryana

Tender For corrigendum : online tender for the rate contract for the supply of medical drug consumables to various hospitals of government of haryana for a period of two years for group c - sodium hypochlorite solution 10%, 5 litre, posterior chamber pmma iol optical diameter 6mm, overall length 12.5 mm, optic design biconvex, 360 degrees posterior square edge and uv protection should be there, dioptric range +21d, posterior chamber pmma iol optical diameter 6mm, overall length 12.5 mm, optic design biconvex, 360 degrees posterior square edge and uv protection should be there, dioptric range +20d, posterior chamber pmma iol optical diameter 6mm, overall length 12.5 mm, optic design biconvex, 360 degrees posterior square edge and uv protection should be there, dioptric range +19d, endotracheal tube, uncuffed no. 2.5 specification: sterile, single use, medical grade pvc, transparent, murphy eye at distal end with polished smoothness, radio-opaque line throughout the length, standard 15 mm connector at proximal end. curved blister pack suiting the magill curve. internal diameter : 2.5mm, endotracheal tube, cuffed no. 5.0 specification: sterile, single use, medical grade pvc, transparent, high volume low pressure cuff towards the distal end, kink resistant inflation tube, murphy eye at distal end with polished smoothness, radio-opaque line throughout the length, standard 15 mm connector at proximal end. curved blister pack suiting the magill curve. internal diameter: 5.0mm, endotracheal tube, uncuffed no. 4.5 specification: sterile, single use, medical grade pvc, transparent, murphy eye at distal end with polished smoothness, radio-opaque line throughout the length, standard 15 mm connector at proximal end. curved blister pack suiting the magill curve. internal diameter: 4.5mm, endotracheal tube, uncuffed no. 4.0 specification: sterile, single use, medical grade pvc, transparent, murphy eye at distal end with polished smoothness, radio-opaque line throughout the length, standard 15 mm connector at proximal end. curved blister pack suiting the magill curve. internal diameter: 4.0mm, endotracheal tube, cuffed no. 5.5 specification: sterile, single use, medical grade pvc, transparent, high volume low pressure cuff towards the distal end, kink resistant inflation tube, murphy eye at distal end with polished smoothness, radio-opaque line throughout the length, standard 15 mm connector at proximal end. curved blister pack suiting the magill curve. internal diameter: 5.5mm, endotracheal tube, cuffed no. 8.0 specification: sterile, single use, medical grade pvc, transparent, high volume low pressure cuff towards the distal end, kink resistant inflation tube, murphy eye at distal end with polished smoothness, radio-opaque line throughout the length, standard 15 mm connector at proximal end. curved blister pack suiting the magill curve. internal diameter : 8.0 mm, endotracheal tube, uncuffed no. 5.0 specification: sterile, single use, medical grade pvc, transparent, murphy eye at distal end with polished smoothness, radio-opaque line throughout the length, standard 15 mm connector at proximal end. curved blister pack suiting the magill curve. internal diameter: 5.0 mm, chest tube drainage with water seal bag no. 28, acetone 400 ml, mr cannula no. 7, mr cannula no. 8, mr cannula no. 6, eeg paste, cervical collar large size (soft), cervical collar medium size (soft), cervical collar small size (soft), hard cervical collar (universal) size, ecg roll small, albendazole chewable tablets 400 mg(the chewable tablets shall also comply with the test for disintegration and dissolution as per monograph given in international pharmacopeia as per requirement of goi)

CTN :41290897

12 Aug, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of thermometer , temprature sensor fr-98703000034 , transmitter , pressure transmitter , transmitter , sliding distributor fr-98725900001 , a washer 65 , pressure transmitter , o-ring , o-ring , gasket (figure 5 , item 33) , micro console card , o-ring , nut , gasket , gasket , o-ring , snap ring 10x1 , washer , schnorr washer , bearing sleeve , t319-3 , sliding rail , bearing shells (lines 51 & 52) , gasket a 21x26 cu b1 , liner o-ring , o-ring , peel shim , washer , small end bush , cover , washer , receptacle seal for distributor 541 iso 1 , resilient pad vibrachoc e1n-3391-01 , o-ring (rear bearing of compressor pinion shaft) , t312-9 , h nut m-14 , washer , plug , snep nut h130 m16-200 , element 68 / 78c ch7 / pl10 / 29 , back-up battery tsx bat m01 , pin , wire sealing and lead for safety locking , fuel make up pump , star filter element , fr-xxbnn151349 , clip dn 113 , o-ring (front bearing of compressor pinion shaft) , lock tab , roller , lower gasket , spring , lock tab , nut , motor compressor cover o-ring (timing gear side) , motor compressor casing o-ring , cotter pin m10-20 , o-ring (shaft assembly) , gasket , sealing bush , a gasket33x39 , stop washer engine side , lock tab , gasket a 10-15 , handling of cylinder head , lock tab , o-ring (for diffuser) , position switch , tempreture sensor , o ring , gasket , o-ring r11 (-953/954) , bearing shell , sealing ring , o-ring , ball joint , ball bearing , lock tab , lock tab , lock tab , lock tab , lock nut , o-ring di 30x4 21a7 , e pin 12-30 , seal washer bs c18 20a8 , cetering pin , expansion bellows , gasket , lock tab , gasket 4 holes 120x120x1 , 2 , shim , o-ring , snep nut h130 m10-150 , pin , stop washer , guiding bush , air distributer , rear sleeve bearing , driven feeding pump , gasket , t312-10 , h screw m14-60 , t3011-1 , half-crown , t307-1 , cap , o-ring r14 (-952 / 953) , sealing ring , o-ring , gasket , ball joint , bush , gasket (-951/953) , o-ring r35 (-953 / 954) , temperature sensor , broach assembly gasket , lock tab , lock tab , lock tab , o-ring , clutch gasket , ring (ch7-pl5-83) , top ring , gasket kit , gasket , gasket , filtering element , t307-3 , driving dog , expansion bellows , air filter , scraper ring , compressor front bearing labyrinth gasket , lock nut , stop pin , exhaust valve fr-xxbnn151341 , o-ring fr-xxbnn151345 , o-ring fr-xxbnn151342 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , injection pipe , fr-xxbnn151349 , tools for cyl head fr-xxbnk151342 , combustion chamber cock fr-xxbnn151341

CTN :41305786

13 Aug, 2025 NA

Udhampur - Jammu And Kashmir

Tender For supply of drugs and pharmaceutical products c c - succinylchloline chloride 50 mg per ml, 2 ml inj , povidone iodine 10 percent solution, bott of 100 ml , amikacin sulphate 250 mg per 2 ml inj , tetanus toxoid, amp of 0.5 ml , strip indicators for sterilisation control for testing sterility of drums , bandage t shaped , oxidised cellulose local haemostat 4 inch by 8 inch box of 10 , under water seal drainage with trocar , intravenous catheter cannula with leur fitting nylon or plastic 30 cm long disposal gauge 14 , blood collection bag single with cpd-a anticoagulant 49ml for collection of 350ml blood made up of nontoxic plastic , hydroxy ethyl starch 6 percent soln bott of 500 ml , sodium lactate compound ringer lactate isotonic solution 500 ml self collapsible container ffs technology , needle, suture, round bodied half circle, taper point, size 15, pkt of 6 , cord, stout for extension apparatus nylon , silk black braided non capillary size 3 by 0 reel f 20 mtrs , surgicel size 2 inch by 3 inch, box of 10 , mersilk 2 by 0 rb needle, needle size 26 mm,length 76 cm , polygalactin 910, polyglycolic acid vicryl, size no 1 rb needle, needle size 40 mm length 100 cm , lignocaine hcl 5 percent heavy 2 ml inj for spinal anaesthesia ) /bid number : gem/2025/b/6501738 * /dated: 02-08-2025 & & / bid document 1 / 19

Central Government/Public Sector

CTN :41152854

11 Aug, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : procurement of spares for dmw pumps for b and s and mh assets-, journal bearing (upper-lower), straight pin, bearing end cap shim, bearing end cap shim, bearing end cap shim, constant level oiler, labyrinth ring, labyrinth ring, labyrinth ring, labyrinth ring adapter, oring, straight pin, labyrinth ring adapter, oring, straight pin, air breather, throat bushing (with splitter), throat bushing (without splitter), oil ring collar, oil ring, impeller wear ring eye ist stage, impeller wear ring eye series, imp. wear ring hub center, imp. wear ring hub series, 1st stage sleeve, balancing piston, centre sleeve, casing gasket, case wear ring eye-ist stage, case wear ring eye-1st stage, case wear ring eye-series, hexagon socket key, hexagon socket key, hexagon socket key, hexagon socket key, hook spanner wrench, hook spanner wrench, impact offset wrench, impact offset wrench, socket for impact wrench, socket for impact wrench, ratchet handle, hexagonal nut, hexagonal nut, coupling nut wrench, coupling puller, ring joint gasket, ring joint gasket, casing gasket, bearing cover gasket, bearing lock nut, bearing lock washer, bearing isolator inboard, bearing isolator outboard, air breather, oil level galige, constant level oiler, throat bushing, oil flinger, spiral wound gasket, spiral wound gasket, impeller wear ring, case wear ring, hexagon socket screw key, hook spanner wrench, socket, extension bar, offset handle, coupling puller, o-ring, adapter for proximity probe, labyrinth ring, labyrinth ring adapter, o-ring, bearing end cap shim, distance adjusting shim, anti rotation pin, bearing lock nut, location ring bearing, oil ring, oil retaining ring, air breather, sleeve bearing, key coupling, key-thrust collor, key-coupling for lube oil pump, coupling nut, air breather (6 x 8 x 22hhs), heat exchanger (6 * 8 * 22h * 6f)/(6 * 8 * 22hs), side cap gasket, casing gasket (6x8x22 hhs), bearing lock washer (6x8x22hhs), impeller wearing (front side), impeller wearing (back) sus403, case wearing (front side), case wear ring (back side)6x6x 10-1/2 vl, , inboard end cap, outboard end cap, end cap gasket, sleeve gasket, impeller nut sus 403, bearing lock nut (6 x 8 x 22hhs), deflector inboard, deflector outboard, bearing side cap, throat fishing sibrant, studs & nuts, bolts, bolts ss41, bolts, impeller key, coupling key 5450, seal sleeve, oil flinger, impeller, packing (1.1/2x2x8hhs), packing gland (1.1/2x2x8hhs), throttle bushing (1.1/2x2x8hhs), casing gasket, seal sleeve (1.1/2x2x8hhs), impeller, impeller wear ring(front), impeller wear ring back), case wear ring(front), case wear ring(back), inboard end cap, outboard end cap, sleeve gasket, end cap gasket, impeller nut, bearing lock nut, deflector inboard, deflector outboard, bearing lock washer, bearing housing, bearing bracket support, bolts, bolts, bolts, bolts, bolts, air breather, impeller key, coupling key, studs and nuts, , studs and nuts, lantern ring, shaft, oil flinger, casing gasket(spiral wound), bearing cover gasket, bearing isolator inboard, bearing isolator outboard, impeller wear ring, impeller nut, impeller key, coupling key, casing stud & nut, case wear ring, throat bushing, hs bolt for brg housing, bolt for brg.cover, bearing lock nut, oil flinger, air breather, oil level gauge, constant level oiler, cooling fan, impeller, shaft, bearing housing, impeller, impeller wear ring, impeller nut, shaft, impeller key, coupling key, heat flinger, casing stud & nut, casing gasket, case wear ring, throat bushing, hs bolt for brg housing, hs bolt for brg cover, bearing cover gasket, bearing lock nut, bearing lock washer, bearing isolator inboard, bearing isolator outboard, oil flinger, air breather, oil level gauge, constant level oiler, cooling fan, bearing housing, bearing cover, thermowell, bearing lock nut (1 1/2 x 2 x 10 hhs), oil finger (1 1/2 x 2 x 10 hhs), bearing lock washer 1x2x10hhs), throat bushing (1-1/2x2x10-1/2 hhs), bolts (1 1/2 x 2 x 10 hhs), bol

CTN :41066572

11 Aug, 2025 NA

Daman - Gujarat

Tender For corrigendum : supply of purchase of surgical material e e - 9.1mt , paper tape micro pore 5.0cm x 9.1mt , ryles tube disposable sterilized size 6 , ryles tube disposable sterilized size 8 , ryles tube disposable sterilized size 10 , ryles tube disposable sterilized size 12 , sterilized disposable needle size 24g x1.5 , suction catheter sterile no.06 , suction catheter sterile no.08 , suction catheter sterile no.10 , suction catheter sterile no.12 , suction catheter sterile no.14 , suction catheter sterile no.16 , suction catheter sterile no.18 , surgical blade size no.20 , surgical blade size no.23 , tracheosotomy tube size 7.5 with cuff , easy flow regulator 23g x micro infusion set , diaper baby small , bandage roll gauz wrap 30x20 weft 40 count x 40 count deluxe quality 15 cm x 4 meter x 10 roll , bandage roll gauze wrap 30x20 weft 40 count x 40 count deluxe quality 10 cm x 4 meter x 10 roll , bandage roll gauze wrap 30x20 weft 40 count x 40 count deluxe quality 7.5 cm x 4 meter x 10 roll , double lumen cvp acdc 7f x8 20cm polyurethane cvc kit , guedal airway no. 0 , gudal air way no.1 , gudal air way no.2 , gudal air way no.3 , romo vac set size -08 , romo vac set size 10 , romo vac set size -12 , romo vac set size -14 , romo vac set size -16 , skin stapler remover , disposable gown , prolene mesh 10cmx15cm , prolene mesh 15cmx15cm , urethel catheter 70cm 6fr , unsterile gauze swab 7.5cm x 7.5cm 1 pkt 100pic , gauze cloth 90cm x 18mt wrap 30x20 weft 40 count x 40 count , gamjee roll 15cm , phototherapy eye band pediatric , silicon tubal ring , dead body cover with chain , elbow gloves s gynaec , water sealed drainage system , ryles tube disposable sterilized size 5 , ear bud swabs 200 tips per pack both side swab , nerve locator needle stimuplex 22 x 2, 0.70 x 50 mm 5 cm , nerve locator needle stimuplex 22 x 2, 0.70 x 100 mm 10 cm , lance tip 15 degree , ioban drape , iol lense no. 3 , iol lense no. 4 , surgical blade size no.24 , surgical blade size no.10 , crescent blade 45 degree , 90 d lense , 4 mirror gonio lense , 70 d lense , iris hooks , malyugin ring , nasopharyngeal airway no. 7.0 , nasopharyngeal airway no. 7.5 , laringeal mask no. 3.0 , laringeal mask no. 4.0 , catheter mount , stillet size s , stillet size m , stillet size l , merocel nasal packs 8cm 1 box 20pcs , double lumen catheter size 12f x 13.5 cm , chlorhexidine gauze dressing 10cm x 10cm 1box 10 pcs , pop bandage 7.5cm x 2.7mtr. , flexo matallic oral nasal tube no.5.5 , flexo matallic oral nasal tube no.6 , flexo matallic oral nasal tube no.6.5 , flexo matallic oral nasal tube no.7 , flexo matallic oral nasal tube no.7.5 , flexo matallic oral nasal tube no.8 , flexo matallic oral nasal tube no.8.5 , flexo matallic oral nasal tube no.9 , folleys ballon catheter no.18 with three way connection , transparent perforated plastic film tape 50mmx9.1mtr , disposable tuberculline syringe with needle 1ml 24g , bougie size 11 abdominal drainage kit no.16", abdominal drainage kit no.20", abdominal drainage kit no.22", abdominal drainage kit no.24", abdominal drainage kit no.26", abdominal drainage kit no.28", abdominal drainage kit no.30", abdominal drainage kit no.32", chest drainage catheter no. 24, chest drainage catheter no. 28, chest drainage catheter no. 30, chest drainage catheter no. 32, colostomy bag (25 cmx14cm) , disposable syringe with needle 1ml (24g), disposable syringe 50ml with 22g without needle, endotracheal tube plain without cuffed 2.5, endotracheal tube plain without cuffed 3.0, endotracheal tube plain without cuffed 3.5, endotracheal tube plain without cuffed 4.0, endotracheal tube plain without cuffed 4.5, endotracheal tube plain without cuffed 5.0, //bid details 2 / 100

CTN :41322927

29 Aug, 2025 NA

Halisahar - West Bengal

Tender For supply of kit of spares for mono-block type water raising apparatus 1/2 hp, 415v ac, 3 ph, 50hz conforming to rdso specification no. rdso/pe/spec/ac/0022 (rev-0)-2002 with amd t. no.1, comprising of: (1) mech. shaft seal drl type size 16 mm, make technic or similar-0 1 no. (2) check valve- 01 no. (3) neoprene gasket- 01 no. (4) fan blade- 01 no. (5) gland, gl and washer (water seal)- 01 no. (6) drain plug rubber washer- 01 no. (7) circlip of mech. seal- 01 no. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :41305030

26 Aug, 2025 NA

East Singhbhum - Jharkhand

Tender For supply of water seal size-45x60x10, suitable for boomer 281

Corporations And Associations And Others

CTN :41289329

13 Aug, 2025 88.02 Lacs

Delhi - Delhi

Tender For supply and installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi and chandni chowk for various locations of parks in municipal corporationof delhi - supply & installation of children play equipments under mplads funds of parliamentary constituency new delhi, south delhi & chandni chowk for various locations of parks in municipal corporationof delhi, supply and fixing of four seated merry go round. area: 1.5 m. height 0.8 m. seat moulded f.r.p. main frame: 40 nb g.i. pipe. bearing : heavy duty bearing. ms plate: 250x10mm. support pipe- 80nb. the topcoat is duly powder coated. the item shall be having its main frame made up of 25 & 40. mm nb b class g.i. pipe. the stand shall be made in 80 mm nb b class g.i. pipe. the whole structure shall be mounted on heavy duty bearing shaft. the bearing used shall be of heavy duty bearing permanently lubricated with water sealant. the seat frame shall be made out of frp (fibre reinforced plastic)/lldpe (low linear density ploy ethylene). the seats shall have handrails so that the child does not fall. it shall accommodate 4 children at a time. the powder coating shall be done on the pipes to avoid rusting. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of arch swing. leg support : 80 mm nb pipe, seat- anti skid rubber belt. bearing : heavy duty ball bearing. area : 3.0 m x 2.5 m. height : 2.5 m. top bar : 60 mm nb pipe. suspension : 6 mm rubber coated chain. the topcoat is duly powder coated. in this one child can enjoy the swing at one time. the arch shaped side frame shall be made of 80mm nb b class gi pipe shall be made up of 50mm nb b class gi pipe. the frame shall be powder coated to give an aesthetic look. the swing shall be made up of 10mm thick anti skid rubber top the rubber belt seat / u shape swing seat with 2 eye bolt tyb-s06. made of polyurethane of size 53 x 20.5 x 20 shall be suspended on 6mm rubber coated gi chairn. the bail bearings shall be mounted inside a specially designed nylon clamp. coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of toddler swing.the area :- 2.8m x 1.0m . in this toddler swing the center support shall be made up of 80 mm nb b class g.i. pipe. the horizontal bars shall be made up of 50 mm nb b class g.i. pipe. all gi pipes shall be powder coated. between the two horizontal bars there shall be a heavy-duty metal clamp attached to it. the bucket seats of the toddler swing shall be made of rubber with anti skid. the ball bearings shall be mounted inside specially designed nylon balls. the rubber seat shall be affixed on 8 mm thick gi chain. the seats shall be made with full care so that the child does not fall from it while swinging. powder coating with pure polymer powder with 7 tank treatment 60 to 70 micron thickness. the holding down/fixing of equipments shall be emboded in cement concrete in the ratio of 1:2:4 (1cement : 2 coarse sand :4 stone agg. 20mm nominal size) (as per direction of officer in charge.), supply and fixing of std. see sawhandle :-20 mm n b pipe. lever-32 mm n b pipe. colmun : 60 mm n b pipe. bearing : nylon bush press fitted. seats: frp seats with steel frame. the topcoat is duly powder coated. the level of see saw shall be made from 15, 20 and 25mm nb b class gi pipe. the seat of see saw shall be made from frp/lldpe. the stand and bush bearing made in 40mm nb b class gi pipe. see saw lever shall be welded to 5mm thickness ms plate for nut bolting with stand. all pipes flat

Water Seal Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others