Latest water spout Tenders | Government water spout Tenders

State Government

CTN :45704980

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre , providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. , demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,ement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size) rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

State Government

CTN :45705123

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. , fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre ,filter media providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil.,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size),rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

State Government

CTN :45705319

30 Jun, 2026 NA

Ambala - Haryana

Tender For cc interlocking paver blocks providing and laying 100mm thick factory made cement concrete interlocking paver block of m -35 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over (bis 15658:2006) and including 60mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of engineer-in-charge. , fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre ,filter media providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint, earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil.,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) ,cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size),rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

State Government

CTN :45705643

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre , filter media providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,a cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) , a cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size,na rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

State Government

CTN :45705693

30 Jun, 2026 NA

Ambala - Haryana

Tender For fixing bell mouths bailing out water from the trenches for making new connections in fully charged pipe-lines including cleaning trimming and dressing the trenches to correct alignment and grade as required by the engineer-in-charge. size of the main with which connection is to be made. 1. up to 200 mm internal diametre , filter media providing and fixing cast iron detachable joints class-15 marked with is: 8794 for use with asbestos cement pressure pipes complete with 2 nos. rubber rings marked with is:5382 and is:10292 and appropriate number of nut and bolts marked with is:1363 including carriage, loading, unloading etc. complete in all respects to the satisfaction of the engineer-in-charge. (excavation will be paid separately) 2. 100mm i/d cid joint ,earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1. all kinds of soil. ,demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) ,a cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 2. 1:2:4 (1 cement : 2 coarse sand (zone-iii) : 4 graded stone aggregate 20 mm nominal size) , a cement concrete (cast in situ) providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 6. 1:4:8 (1 cement : 4 coarse sand (zone-iii) : 8 graded stone aggregate 40 mm nominal size,na rain water spouts and pipes providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 2. 110 mm diameter

State Government

CTN :45693816

23 Jul, 2026 NA

Panchkula - Haryana

Tender For purchase of machinery/equipment for electrical trade for up-gradation of govt. quality marketing centre faridabad under trade infrastructure for export scheme(ties). - purchase of machinery/equipment for electrical trade for up-gradation of govt. quality marketing centre, faridabad under trade infrastructure for export scheme(ties)., salt spray chamber, digit mega ohm meter (0-250-500-1000-2500-5000 v selectable), glow wire test apparatus (test temp. range: 0-950 c selectable), kelvin double bridge (with accessories 1 dc source 2 spto reflecting galvanometer, digital), oxygen index test set, smoke density test apparatus, torsion test apparatus, digital optical measuring system (advanced vision system for dimension measurement)testing sample ranger 0-150 mm along with:-, insulation resistance tester-5kv, high voltage test set-2 kv dc, micro ohm meter-0-20 k ohm, ac breakdown tester-100 kv ac, universal bending compression tensile test 5 kn

CTN :45302895

25 Jun, 2026 15.00 Lacs

West Kameng - Arunachal Pradesh

Tender For bid to ras supply of parallel rope bridge , w wall , single step up , crawl fence , two vertical ropes on raised platform , parallel three rope bridge , step up , gate vault havy duty iron firm , steeping stone , ramp , high step over of 11 frames , hand walk with iron stand , smoke chamber , flex boards at each obstacle , shed at sp , balli , jute rope 44 mm , sand bag , paint , gypsy tyre , double tyre wall , crawling , scramble net

CTN :45567249

13 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of integrated smoke and heat detector tester with smoke chamber cleaning features ,containing following accessories -sensor unit-1, battery rod-1, injector-1, mist liquid -1,charger-1, connect rod-4. specifications as per annexure attached. [ warranty period: 30 months after the date of delivery ] ]

CTN :45544117

04 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of rotary conveyer , lv1 r72 172.54.001sb.1 sprocket track drive , n1 r72 1005-560726 rotary conveyer with turn table , lv1 r72 172.52.043sb.1 hyd shock absorber for lh suspensions , n1 r72 1015-002989 cartridge base disposal mech 172-27-001s , lv1 r72 175.56.001sb.b crank with idler wheel left hand , z6 r72 6110-001241 kr 175.3 distribution box kr 175-3s , lv1 r72 mto.1.35.007 bent pipe , lv3 r72 cqa hv set 019 kit no13 supercharger breathr assy instl , z18 r72 misc-127-ty gyro directional indicator gpk-59 , lv1 r72 175.56.002sb.b crank with idler wheel right hand , lv1 r72 175.32.003sb.5a tank oil main , lv1 r72 172.64.001sb.4 servo mechanism , z6 r72 p10-tmy-1s- 000 regulator voltage p10-tmy-1s-000 , lv1 r72 172.52.044sb.1 hydraulic shock absorber for 1st 2nd rh , n1 r72 1015-002936 1 cell lifting mechanism , lv1 r72 54.01.007.1 engine attachment bolt , lv1 r72 613.44.058 pin track , lv1 r72 172.70.007sb.19 mounting of driver s instrument panel , lv1 r72 166.83.047 box , lv1 r72 172.31.099sb rack with radiator and oil cooler , lv1 r72 172.54.002sb.1 disc track drive sprocket , lv3 r72 cqa hv set 012 kit no 6 oil pump , n1 r72 1015-004264 rotary conveyer 172- 18-019sb , lv1 r72 5930610128138 switch electric smoke generating eqpt , lv1 r72 172.45.018.3 shaft , lv1 r72 172.52.104 washer 172-52-104 , z6 r72 m1360- 7-000sb meter special scale , lv1 r72 4810430003084 valve device 172-2m-66-001sb , z6 r72 bk-2-968-097 replenishing tank traverse , k9 b11-5-2s1-000 cont box elec armt sys b-11-5-2s1 , lv1 r72 175.33.007sb.2 tank external 1st , z6 r72 172-70-043 sb-6 wiring harness branched cable assy no 3 , n1 r72 2510- 008496 lock 172-18-015-sb-1 , lv1 r72 172.11.071.1 race ring, stationary , lv1 r72 175.32.002sb cooler oil , lv3 r72 cqa hv set 018 kit no12 fuelfilter,fuelpump drive presr , lv1 r72 172.65.061 plate torsion , lv1 r72 172.65.018sb.1 frame , n1 r72 3940-000931 tongs for cell lifting mech , lv1 r72 175.02.064sb.2 shutters outlet , lv1 r72 175.32.001sb.a cooler, oil , n1 r72 1015-003085 roller 172-18-041sb , lv1 r72 54.02.117sb clip , lv1 r72 172.65.001sb.2 retainer lh , lv1 r72 172.65.025sb.3 cushion seat , n1 r72 1015-003061 rammer 172-26-001sb-2 , lv1 r72 172.52.105 cover , lv1 r72 172.31.120sb fan , lv1 r72 172.02.190sb cover , lv3 r72 cqa hv set 010 kit no4 for verticl drive air distributr , lv1 r72 172.52.045sb.1 hyd shock absorber 6th for rh suspension , lv3 r72 sb 3304-01- 8 piston with ring sb 3304-01-8 , n1 r72 1005-560679 1 turn table assy rotary conveyer , n1 r72 1015- 003106 1 bushing rotary conveyer 172-18-238 , lv1 r72 v.572.0175.0021 assy of era bracket for lower shields , lv1 r72 172.53.005sb cover packing , lv1 r72 176.70.021sb box kp-73-1 , lv1 r72 172.52.046sb body , lv3 r72 cqa hv set 015 kit no9 manifold oil pipe assy 33 item , lv1 r72 172.23.002sb mechanism turret traversing manual , lv3 r72 cqa hv set 017 kit no11 fuel pump drive veriable spped , lv1 r72 mto.1.35sb.a vaccum cleaner , lv1 r72 172.65.044sb.2 mounting plate , lv3 r72 sb 3312-00-15 oil pump assy sb 3312- 00-15 , lv1 r72 175.41.008sb.1 bevel reduction gear unit , lv1 r72 613.44.16sb.d1 track link , lv1 r72 172.46.010sb.1 pump delivery , lv1 r72 3040430006960 distributing mechanism left hand , n1 r72 1015- //bid details 3 / 137 003471 tray drg no 2a26sb-02-32sb , lv1 r72 175.31.002sb radiator water right hand , z6 r72 176- 74sb mtg of ele component of auto load gear , n1 r72 1015-002887 recoil brake assy 2a46-sb-08-sb , n1 r72 1015-002897 1 recuperator 2a46-cb-07 cb , n1 r72 1015-003945 guard assy drg 2a46-sb-10-sb , lv1 r72 cqa hv 5.33.010 right hand front fuel tank assy , n1 r72 5310-015451 nut evacuator chamber 2a20-01-8 , n1 r72 1015-002862 crank with roller 2a26sb-02- 50sb , lv3 r72 sb 3305-01-17 crank shaft , k9 t72 nbc 4240-000490 blower blower motor respirator , lv1 r72 175.32.087sb.2 tank oil transmission , n1 r72 1015-002882 cradle assy 2a46sb-09sb , n1 r72 1015- 003359 cylinder 2a46-08-1 , lv1 r72 184.04.028sb.1 shield

Central Government/Public Sector

CTN :45396419

07 Jul, 2026 NA

Bulandshahr - Uttar Pradesh

Tender For supply of cone calorimeter and smoke density chamber for fire property testing of materials (cost of basic machine meeting the requirement of attached technical specification including preventive maintenance during warranty period). [ warranty period: 30 months after the date of delivery ] ]

Water Spout Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector